GB/T 13262-2008 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13262-2008: Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconforming Status: Valid GB/T 13262: Historical versions
Basic dataStandard ID: GB/T 13262-2008 (GB/T13262-2008)Description (Translated English): Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconforming Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A41 Classification of International Standard: 03.120.30 Word Count Estimation: 12,135 Date of Issue: 2008-07-16 Date of Implementation: 2009-01-01 Older Standard (superseded by this standard): GB/T 13262-1991 Quoted Standard: GB/T 321; GB/T 2828.1-2003; GB/T 10111; GB/T 13264; GB/T 19000-2000; ISO 3534-1-2006; ISO 3534-2-2006 Adopted Standard: JIS Z9002, NEQ Regulation (derived from): Announcement of Newly Approved National Standards No. 12 of 2008 (No. 125 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the percentage of a batch of defective quality indicators once the count standard sampling procedures and implementation methods for single- batch quality assurance sampling. This standard applies to the inspection lot and batch quantities greater than 250 when the sample size is greater than 10 situation. When a batch or batches of less than 250 and the sample size is greater than 10, the standard retrieved from the sampling program are approximate, recommended by GB/T 13264 determined by the method specified in the sampling plan. This standard specifies the production side risk �� = 0. 05, the consumer risk �� = 0. 10. GB/T 13262-2008: Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconforming---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconforming ICS 03.120.30 A41 National Standards of People's Republic of China Replacing GB/T 13262-1991 Percent nonconforming count standard A sampling procedures and sample forms Posted 2008-07-16 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms, definitions and symbols 1 3.1 Terms and definitions 3.2 Symbols 3 4 sampling program 4 Example 5 sampling test 4 6 Table 5 Sampling PlanForewordCurrently, the International Organization for Standardization (ISO ) has yet to enact such standards. The standard reference to the Japanese standard JISZ9002, and Japanese standards JISZ9002 compared to changes in the technical content include. --- Positive and auxiliary tables are combined into a table, make it easier to retrieve the sampling plan. This standard replaces GB/T 13262-1991 "count nonconforming rate of a sampling inspection procedures and sample forms." This standard compared with GB/T 13262-1991, changes in technology content include. --- The batch quality index by the percent nonconforming batch to batch percent nonconforming; --- Increasing the acceptable quality level, a number of terms such as noun actual quality level; --- Increasing the actual quality level compared with the acceptable quality level determination discussion; --- The original sampling plan table has been recalculated, revised the original GB/T 13262-1991 the individual sampling plan; --- Special emphasis on this standard can be applied in addition to the final products, components and raw materials, but also can be used to operate in the article, Inventory, maintenance operations, data or records management program. The standard proposed by China National Institute of Standardization. Application of this standard by the National Standardization Technical Committee on statistical methods. This standard drafting units. China National Institute of Standardization, Guangzhou Product Quality Supervision and Inspection, China Aerospace Science and Industry Corporation II Institute, People's Liberation Army Ordnance Engineering College, Shandong CIQ. The main drafters of this standard. YU Zhen Fan, Dengsui Xing, Ding Wenxing, attentive, Zhang Yuzhu, Great Ideals, Wang. This standard replaces the standards previously issued as follows. --- GB/T 13262-1991.IntroductionThis standard is designed sampling scheme is a standard sampling plan, it can be isolated for sampling a number of products, without the use of Past information, so it is called a single batch sampling quality assurance. Sampling plans specified in this standard, while control of two wrongful convictions Probability, when the consumer on the quality of each batch of products are more stringent requirements, or quality history of the supplier of the products offered nothing to understand, the use of Such programs are appropriate. The scope of application is different from the standard GB/T 2828.1-2003, GB/T 2828.1-2003 suitable for continuous batch acceptance pumping Thus, it does not apply to isolated batch sampling, the main reason is that, GB/T 2828.1-2003 is subject to acceptance quality limit AQL Cord. The scope of application is different from the standard ISO 2859-2, which is the main reason, ISO 2859-2 is limiting quality LQ to retrieve. The standards set forth in the sampling procedure for isolated batch. The standard design of a number of rules, so that when the actual quality of the batch of water When the level consistent with acceptable quality level, the contractor does not receive a batch of little risk. If the actual level of quality also required when the batch does not meet acceptable quality When the level of risk of the same sentence received the batch is small, there must be a larger sample size. In order to make the appropriate sample size, when the actual quality permit When the level does not meet acceptable quality level, the higher the risk sentence received the batch. Percent nonconforming count standard A sampling procedures and sample forms1 ScopeThis standard specifies the count standard in batch defective percentage of quality indicators and a sampling program implementation methods, appropriate Quality assurance for a single batch sampling. This standard applies to the inspection lot quantities greater than 250 and the bulk sample is greater than the amount of the case 10. When the batch is less than 250 Or bulk sample and the amount is not more than 10, retrieved by this standard sampling plans are approximate, recommended by the GB/T 13264 in Regulation Definite method to determine the sampling plan. Producer Risk provisions of this standard is α = 0.05, the consumer risk β = 0.10. This standard provides the sampling plan can be used for (but not limited to) the following variety of products (output thereof), such as. ---Final product; --- Parts and raw materials; ---operating; --- In the article; --- Inventory; --- Maintenance operations; --- Data or records; --- Management procedures.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revised edition are not suitable for this standard. However, according to the study encourages the parties to the agreement Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 321 Priority number and priority number system GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample Programme (ISO 2859-1.1999, IDT) GB/T 10111 random number generation and its application in product quality sampling in GB/T 13264 percent nonconforming small batch count sampling procedures and sample forms GB/T 19000-2000 Quality Management System - Fundamentals and vocabulary (ISO 9000.2000, IDT) ISO 3534-1.2006 Statistics Vocabulary and symbols - Part 1. General statistical terms and terms used in probability ISO 3534-2.2006 Statistics Vocabulary and symbols - Part 2. Applied Statistics 3 Terms, definitions and symbols GB/T 2828.1-2003, ISO 3534-1.2006, ISO 3534-2.2006 and GB/T 19000-2000 determine the terms, definitions, And the following symbols and terms, definitions and symbols apply to this standard. For ease of reference, certain terms are taken directly from the above criteria. 3.1 Terms and Definitions 3.1.1 Provisions on one or a set of requirements, or products into unit only pass or fail, or computing unit only substandard products ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13262-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 13262-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13262-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13262-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13262-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13262-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
