GB 19260-2016 PDF EnglishUS$90.00 · In stock · Download in 9 seconds
GB 19260-2016: Structure Requirements of Low Floor Public Bus and Low Entry Public Bus Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB 19260: Historical versions
Similar standardsGB 19260-2016: Structure Requirements of Low Floor Public Bus and Low Entry Public Bus---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB19260-2016GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.080.20 T 42 Replacing GB/T 19260-2003 Structure Requirements of Low Floor Public Bus and Low Entry Public Bus Issued on: DECEMBER 30, 2016 Implemented on: JULY 1, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of PRC. Table of ContentsForeword ... 3 1 Scope ... 5 2 Normative References ... 5 3 Terms and Definitions ... 5 4 Requirements ... 6ForewordThe Chapter 4 in this Standard is mandatory, while the rest are recommended. This Standard was drafted as per the rules specified in GB/T 1.1-2009. This Standard replaced GB/T 19260-2003 Structure Requirements of Low Floor City- Bus and Low Entry City-Bus; compared with GB/T 19260-2003, this Standard has the following major changes of technical contents besides the editorial modifications. --- The standard nature is changed from recommended into mandatory; --- The change of standard scope (see Chapter 1 of this Edition; Chapter 1 of 2003 Edition); --- Modified the terms and definitions (see Chapter 3 of this Edition; Chapter 3 of 2003 Edition); --- Deleted the requirements of strength and stiffness (see 4.1 of 2003 Edition); --- Modified the requirements of roll stability (see 4.1 of this Edition; 4.2.1.1 and 4.2.1.2 of Edition 2003); --- Listed separately the requirements of articulated bus by the longitudinal permeability radius of permeability (see 4.2 of this Edition; and 4.2.2 of Edition 2003); --- Added the requirements that air suspension and body lifting system shall be equipped for the low floor public bus with body length greater than 9m; the requirements that air suspension shall be equipped for the low entry public bus with body length greater than 9m (see 4.3 of this Edition); --- Modified the provisions of the number of exits (see 4.4.1.1~4.4.1.5 of this Edition; 4.3.1.1 and 4.3.1.2 of 2003 Edition); --- Modified the provisions of the minimum size of the exit (see 4.4.2 of this Edition; 4.3.2 of 2003 Edition); --- Added the requirements of exit position and exit technology (see 4.4.3 of this Edition); --- Added the requirements of exit mark (see 4.4.4 of this Edition); --- Modified the provisions of width of channel between the front hoods, and the width of channel between the rear hoods; added the measurement range of width of channel between hoods (see 4.5.1.1.1, 4.5.1.1.2, 4.5.1.1.3 of this Edition; and 4.4.1.1.1 and 4.4.1.1.2 of Edition 2003); --- Added the requirements of measurement state of the one-step height from the ground (see 4.5.2.1 of this Edition); --- Deleted the provisions of channel floor height, modified the provisions of the one- step height from the ground (see 4.5.2.2 of this Edition; 4.4.1.3 of 2003 Edition); --- Modified the height limit value within the compartment (see 4.5.3 of this Edition; 4.4.3 of 2003 Edition); --- Deleted the requirements of setting wheelchair on top window or stroller parking area, and the provisions of handrails (see 4.3.1.3, 4.4.2 and 4.4.4 of 2007 Edition) --- Added that the low floor public bus and low entry public bus shall meet the structural safety requirement of Class-I bus stipulated in GB 13094 (see 4.6 of this Edition). This Standard was proposed by the Ministry of Industry and Information Technology. This Standard shall be under the jurisdiction of National Technical Committee for Standardization of Automotive (SAC/TC 114). Drafting organizations of this Standard. Jinhua Youngman Automobile Manufacturing Co., Ltd. Participating drafting organizations of this Standard. Shanghai Wanxiang Automobile Co., Ltd., Anhui Ankai Automobile Co., Ltd., China Highway Vehicle & Machinery Co., Ltd., Zhengzhou Yutong Bus Co., Ltd., Chongqing Vehicle Test Research Institute Co., Ltd., Technical Center of Dongfeng Commercial Vehicle Co., Ltd., Chongqing Hengtong Bus Co., Ltd., Xiamen King Long United Automotive Industry Co., Ltd., Xiamen Golden Dragon Bus Co., Ltd., Beiqi Foton Motor Co., Ltd., Yangzhou Yaxing Motor Coach Co., Ltd., Henan Shaolin Bus Co., Ltd., Higher Bus Company Limited, Chengdu Bus Co., Ltd., Zhongtong Bus Holding Co., Ltd., China FAW Group Corporation, Dandong Huanghai Automobile Co., ltd., Shanxi Automobile Group Co., Ltd., Guilin Bus Industrial Group Co., Ltd., Beijing Public Transport Holdings (Group) Co., Ltd., Hangzhou Public Transport Group Co., Ltd., and Guangzhou No.2 Bus Company. Chief drafting staffs of this Standard. Li Jianfang, Fang Peijin, Diao Wei, Pei Zhihao, Huan Xiaoli, Zhao Lixiang, Guo Zhiyong, Yao Bo, Xu Maolin, Yang Qingquan, Zheng Hongjun, Wang Yongtao, Wang Jianzhong, Liu Jihong, Chen Qingdi, Zhang Peng, Fang Yuanhua, Ren Yi, Li Chen, Zhou Jianguo, Li Guilan, Chen Weiyang, and Liang Kai. The historical edition replaced by this Standard is as follows. --- GB/T 19260-2003. Structure Requirements of Low Floor Public Bus and Low Entry Public Bus1 ScopeThis Standard specifies the definitions and structural requirements of low floor public bus and low entry public bus. This Standard is applicable to the low floor (single-deck, double-deck, articulated) public bus, and low entry (single-layer, double-layer, articulated) public bus of the Class-I bus.2 Normative ReferencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document. GB 13094 The Safety Requirement for Bus Construction GB 30678 Safety Signs and Information Symbols for the Use of Bus3 Terms and DefinitionsThe following terms and definitions stipulated in GB 13094 are applicable to this document. 3.1 Low floor public bus The city bus forming a stepless single area in the central channel floor from the front passenger door to the last axis centerline (or beyond the centerline) within the compartment (the double-deck bus indicates the lower compartment); with each passenger door of one-step. 3.2 Low entry public bus The city bus forming a stepless single area in the central channel floor from front ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 19260-2016 be delivered?Answer: The full copy PDF of English version of GB 19260-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 19260-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB 19260-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 19260-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB 19260-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 19260-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB 19260-2016?A step-by-step guide to download PDF of GB 19260-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 19260-2016". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
