GB/T 1303.9-2009 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1303.9-2009: Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 9: Requirements for rigid laminated sheets based on polyimide resins
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 1303.9-2009	209	Add to Cart	3 days	Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 9: Requirements for rigid laminated sheets based on polyimide resins	Valid

Similar standards

GB/T 1408.1   GB/T 1408.2   GB/T 1408.3   GB/T 1303.12   GB/T 1303.5   GB/T 1303.11   

Basic data

Standard ID: GB/T 1303.9-2009 (GB/T1303.9-2009)
Description (Translated English): Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 9: Requirements for rigid laminated sheets based on polyimide resins
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K15
Classification of International Standard: 29.035.01
Word Count Estimation: 9,969
Date of Issue: 2009-06-10
Date of Implementation: 2009-12-01
Quoted Standard: GB/T 1303.1-2009.GB/T 1303.2-2009
Adopted Standard: IEC 60893-3-7-2003, MOD
Regulation (derived from): Announcement of Newly Approved National Standards No. 8, 2009 (No. 148 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the electrical polyimide resin and reinforcing materials as the base for various industrial rigid laminated sheets of names, requirements, test methods and delivery requirements. This section applies to the glass cloth as the substrate, a polyimide resin as a binder formed by hot pressing hard polyimide resin laminate.

GB/T 1303.9-2009: Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 9: Requirements for rigid laminated sheets based on polyimide resins

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 9. Requirements for rigid laminated sheets based on polyimide resins ICS 29.035.01 K15 National Standards of People's Republic of China Thermosetting resins for electrical industrial rigid laminated sheets Part 9. rigid polyimide resin laminate (IEC 60893-3-7.2003, Insulatingmaterials-Industrialrigidlaminatedsheets basedonthermosettingresinsforelectricalpurposes-Part 3. Specifications forindividualmaterials-Sheet7. Requirementsforrigidlaminated sheetsbasedonpolyimideresins, MOD) Posted 2009-12-01 2009-06-10 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 1303 "thermosetting resins for electrical industrial rigid laminated board", is divided into the following sections. --- Part 1. Definitions, designations and general requirements; --- Part 2. Test methods; --- Part 3. Industrial rigid laminated board model; --- Part 4. rigid epoxy laminates; --- Part 5. rigid melamine resin laminate; --- Part 6. rigid phenolic resin laminate; --- Part 7. Polyester resin rigid laminates; --- Part 8. rigid silicone resin laminate; --- Part 9. rigid polyimide resin laminate; --- Part 10. bismaleimide rigid laminates; --- Part 11. Polyamide-imide resin rigid laminates; This part of GB/T 1303 Part 9. The partial modification of the use of IEC 60893-3-7.2003 (2nd edition) "thermosetting resins for electrical industrial rigid laminated sheets - Part 3. Single Materials Specifications Item 7. polyimide resin laminate rigid requirements "(in English) of the relevant content. This section 60893-3-7 and IEC .2003 The differences are as follows. a) Remove the IEC 60893-3-7 in the "Preface" and "Introduction", the introduction of this part of the content into "foreword" in; b) of Chapter 1, "program" has been modified, deleted the material meets note, increasing the scope of application; c) delete the dimension in Chapter 3 of labeling information; d) according to the actual situation needs, supplemented with "apparent flexural modulus of elasticity," "vertical layer to the compression strength", "parallel to the shear layer Strength "," Tensile Strength "," adhesive strength "," 1MHz lower dielectric loss factor "," 1MHz dielectric constant "," resistance to tracking Index "," Temperature Index "and" density "of performance requirements related to technical differences in the terms they are involved in the margin A single vertical line identification; e) The "Requirements" chapter of the press, "look", "size" and "flatness", "performance requirements," points written in the "supply requirements" as a separate chapter Write, while IEC 60893-3-7.2003 in Table 5 were modified, the contents of the memo included in this section of Table 6 Table Notes will IEC 60893-3-7.2003 Table 5 - Test methods included in this section reg Chapter 5, "test" rewrite and adds Test methods and cut slats General; f) Remove the IEC 60893-3-7.2003's "References." This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized. This part mainly drafted by. Beijing Fu Runda new insulation material limited liability company, Xi'an Electric Electrical Materials Co., Ltd., Guangxi Lin Electric Institute of Science. Drafters of this section. Liu Qihuan, Duchao Yun, Luo Zhuanyong. This section first formulated. Thermosetting resins for electrical industrial rigid laminated sheets Part 9. rigid polyimide resin laminate

1 Scope

GB/T 1303 This section specifies the name of the group of industrial rigid laminated sheets of electrical polyimide resin and reinforcing material is different, Requirements, test methods and delivery requirements. This section applies to glass cloth as a base material, a polyimide resin binder formed by hot pressing a polyimide resin rigid laminate. Their uses and characteristics are shown in Table 1.

2 Normative references

The following documents contain provisions which, through GB/T reference in this 1303 constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 1303.1-2009 thermosetting resins for electrical industrial rigid laminated sheets - Part 1. Definitions, designations and general requirements (IEC 60893-1.2004, IDT) GB/T 1303.2-2009 Electrical thermosetting resins - Part 2 - Industrial rigid laminated sheets. Methods of test (IEC 60893-2. 2003, MOD)

3 Name

This section relates to the laminate according to the resin used and reinforced materials and different characteristics plate is divided into various models. Various boards The name constructed as follows. --- Number of national standards; --- Behalf of resin-letter abbreviation; --- Representative Reinforcements second two-letter abbreviation; ---Serial Number. Name Example. PIGC301 industrial rigid laminated sheets, the name is. GB/T 1303.9-PIGC301 The following abbreviations are used in this specification. Reinforced resin type material type PI polyimide GC (textile) glass cloth Table 1 Industrial rigid polyimide resin laminate models Uses and characteristics of a model PIGC301 mechanical and electrical use. Mechanical and electrical properties at high temperatures better not from a table Corollary 1. any specific type of laminate certainly does not apply to use is not listed, or a particular laminate is suitable for the large A variety of purposes in the range. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 1303.9-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 1303.9-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 1303.9-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 1303.9-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.