GB/T 1303.3-2008 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1303.3-2008: Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3: Requirements for types of industrial rigid laminated sheets
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 1303.3-2008	169	Add to Cart	3 days	Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3: Requirements for types of industrial rigid laminated sheets	Valid

Similar standards

GB/T 1408.1   GB/T 1408.2   GB/T 1408.3   GB/T 1303.12   GB/T 1303.5   GB/T 1303.11   

Basic data

Standard ID: GB/T 1303.3-2008 (GB/T1303.3-2008)
Description (Translated English): Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3: Requirements for types of industrial rigid laminated sheets
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K15
Classification of International Standard: 29.035.01
Word Count Estimation: 7,783
Date of Issue: 2008-12-30
Date of Implementation: 2010-01-01
Adopted Standard: IEC 60893-3-1-2003, MOD
Regulation (derived from): Announcement of Newly Approved National Standards No. 26 of 2008 (total 139)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the thermosetting resins for electrical purposes Industrial rigid laminated sheets required guidelines. The various properties of the laminate as specified in the following sections. This section applies to thermosetting resins for electrical purposes Industrial rigid laminated sheets.

GB/T 1303.3-2008: Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3: Requirements for types of industrial rigid laminated sheets

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3. Requirements for types of industrial rigid laminated sheets ICS 29.035.01 K15 National Standards of People's Republic of China Thermosetting resins for electrical industrial rigid laminated sheets Part 3. Industrial rigid laminated board Model (IEC 60893-3-1.2003, Insulatingmaterials- electricalpurposes-Part 3. Specificationsforindividualmaterials- Sheet1. Requirementsfortypesofindustrialrigidlaminatedsheets, MOD) Posted 2008-12-30 2010-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 1303 "thermosetting resins for electrical industrial rigid laminated plate" is divided into the following sections. --- Part 1. Definitions, designations and general requirements; --- Part 2. Test methods; --- Part 3. Industrial rigid laminated board model; --- Part 4. rigid epoxy laminates; --- Part 5. rigid melamine resin laminate; --- Part 6. rigid phenolic resin laminate; --- Part 7. Polyester resin rigid laminates; --- Part 8. rigid silicone resin laminate; --- Part 9. rigid polyimide resin laminate; --- Part 10. Bismaleamic rigid resin laminate; --- Part 11. rigid polyamide-imide resin laminate; This section GB/T 1303 Part 3. The partial modification of the use of IEC 60893-3-1.2003 "thermosetting resins for electrical industrial rigid laminated sheets - Part 3. Specifications for individual materials Regulation Fan Section 1. industrial rigid laminated plate model requirements "(2nd edition, in English). This part of IEC 60893-3-1.2003 compared to the main differences are. --- On the Format delete its "reference"; --- Added a technically Bismaleamic (BMI), polyamide imide (PAI), the abbreviation poly ether (DPO) and the corresponding resin Laminates Use and characteristics; --- Delete provisions in Table 1 and the middle platen about the coarse and fine cloth textile reinforcement specifications comment. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized. This part mainly drafted by. Beijing Fu Runda new insulation materials Co., Ltd., Sichuan Material Technology Group Co., East, West Anxi Power Electrical Engineering Materials Co., Ltd., National Engineering Research Center of insulating material, Guilin Institute of Electrical Science. Drafters of this section. Liuqi Huan, Yang Yuanhua, Duchao Yun, Liu Feng, Luo Zhuanyong. This section first release. Thermosetting resins for electrical industrial rigid laminated sheets Part 3. Industrial rigid laminated board Model

1 Scope

GB/T 1303 provisions of this part of the guide thermosetting resins for electrical industrial rigid laminated sheets required. The variety of laminates Can provisions in subsequent sections. This section applies to thermosetting resins for electrical industrial rigid laminated board.

2 Acronym

Reinforced resin type material type EP epoxy CC (Textiles) cotton MF Melamine CP cellulose paper PF phenolic GC (textile) glass cloth UP Unsaturated polyester glass mat GM SI Silicone PC-woven polyester fabric PI polyimide WV wood veneer BMI Bismaleamic CR combination of reinforced material PAI polyamide-imide DPO poly ether NOTE. The name of the CR (a combination of reinforcing material) containing one or more reinforcing material for laminates. The actual composition specified in the relevant product standard.

3 Models

Table 1 Type of laminate. Table 1 laminate models Laminate Model A resin reinforcement material series Applications and Features b EP CC CP GC 301 mechanical and electrical use. Resistance to tracking, abrasion resistance, good chemical resistance. 201 electrical use. Electrical properties under high humidity, good stability, low flammability. 201 mechanical, electrical and electronic use. Temperature under high mechanical strength, good electrical properties at high temperature stability. 202 similar EPGC201 type. Low flammability. 203 similar EPGC201 type. High mechanical strength at high temperatures. 204 similar EPGC203 type. Low flammability. 205 EPGC203 similar type, but with coarse cloth. 306 EPGC203 similar type, but to improve the tracking of the index. 307 EPGC205 similar type, but to improve the tracking of the index. 308 EPGC203 similar type, but to improve the heat resistance. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 1303.3-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 1303.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 1303.3-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 1303.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.