GB/T 13029.3-2010 English PDFUS$149.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13029.3-2010: Marine cable -- Choice and installation of telecommunication cables and radio-frequency cables Status: Valid GB/T 13029.3: Historical versions
Basic dataStandard ID: GB/T 13029.3-2010 (GB/T13029.3-2010)Description (Translated English): Marine cable -- Choice and installation of telecommunication cables and radio-frequency cables Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U60 Classification of International Standard: 47.020.60 Word Count Estimation: 5,534 Date of Issue: 2010-09-02 Date of Implementation: 2011-02-01 Older Standard (superseded by this standard): GB/T 13029.3-1991 Quoted Standard: GB 9331-2008; GB/T 9333; GB/T 9334; GB/T 13029.2-2010 Regulation (derived from): National Standard Approval Announcement 2010 No.4 (Total No.159) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the Shipboard telecommunication cables and radio-frequency cables (hereinafter referred to as the cable, when used alone, are referred to as communication cables, RF cable) Choice and installation requirements. This section applies to ship low-frequency (frequency less than 100kHz), cable radio (frequency greater than 100kHz) signals between the device selection and installation. GB/T 13029.3-2010: Marine cable -- Choice and installation of telecommunication cables and radio-frequency cables---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Marine cable. Choice and installation of telecommunication cables and radio-frequency cables ICS 47.020.60 U60 National Standards of People's Republic of China Replacing GB/T 13029.3-1991 Marine cable telecommunication cables and radio frequency cables Choice and installation Issued on. 2010-09-02 2011-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 13029 "marine cable" is divided into three parts. --- Part 1. Low voltage power systems cable selection and installation; --- Part 2. flexible coaxial cable selection and installation; --- Part 3. communication cable and radio frequency cable selection and installation. This section GB/T 13029 Part 3. This Part replaces GB/T 13029.3-1991 "Shipboard telecommunication cables and radio frequency cables Choice and installation." This section compared with the GB/T 13029.3-1991, mainly in the following changes. a) the content of the original standard part repeated integration; b) Delete the original standard of 3.1; c) The shipboard telecommunication cable conductor nominal cross-sectional area of \u200b\u200b0.30mm2 system parameters to 0.35mm2; and increased 2.50mm2 a block parameter; d) Remove the original standard list. This part is proposed by China Shipbuilding Industry Corporation. This part of the National Standardization Technical Committee Marine Boats (SAC/TC12) centralized. This section drafted by. China Shipbuilding Industry Corporation seventh THOUSAND AND FORTY Institute. The main drafters of this section. Zhengfang Lin, Yue Yi, Xia Yong Nan Kai Zhu. This section was first released in 1991. Marine cable telecommunication cables and radio frequency cables Choice and installation1 ScopeThis section GB/T 13029 specifies the Shipboard telecommunication cables and radio frequency cables (hereinafter referred to as cable, when used alone, are referred through Communication cable, radio frequency cable) Choice and installation requirements. This section applies to ship low-frequency (frequency no greater than 100kHz), radio frequency (frequency greater than 100kHz) signal cable between devices Choice and installation.2 Normative referencesThe following documents contain provisions which, through reference GB/T 13029 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB 9331-2008 Ship for rated voltages 1kV and 3kV extruded insulation non-radial field power cables Single and multicore GB/T 9333 Ship electrical equipment Shipboard telecommunication cables and radio frequency cables - General instrumentation, control and communication cables GB/T 9334 Ship electrical equipment Shipboard telecommunication cables and radio frequency cables. Shipboard flexible coaxial cable GB/T 13029.2-2010 marine cables flexible coaxial cable selection and installation3 RequirementsSelect 3.1 communication cable 3.1.1 according to the different requirements of the communication signal equipment or systems, the choice of symmetrical communication cable or wire core shielded multi-core communication cable (for The transmission signal has a high anti-interference performance requirements should be chosen line of shielded communication cable). Wherein symmetrical communication cables for symmetrical back Road, while core shielded multi-core communication cable suitable for asymmetrical circuit. 3.1.2 transmit digital signals, analog signal requirements, should use a dedicated digital signal, analog signal communication cable. 3.1.3 For the communication cable is flame retardant requirements, the cable should be used in single or bunched flame retardant. 3.1.4 Without using the spacer layer between the conductor and the insulating layer extruded thermoset insulated communication cables should be used plated copper conductor, unless By type test proved thermosetting insulation no adverse effects on copper conductors can not plated copper conductors. Using extruded thermoplastic insulating guide Body may not plated metal. 3.1.5 Nominal cross-sectional area of \u200b\u200bthe conductor communications cable should be respectively 0.35mm2,0.50mm2,0.75mm2,1.00mm2, 1.50mm2 and 2.50mm2 six of them. The nominal cross-sectional area of \u200b\u200bchoice should consider the following factors. a) the transmission signal power level; b) the length of the line; c) may be subject to external mechanical forces; d) reliability requirements; e) connector matching requirements. 3.1.6 Unless otherwise specified, symmetrical communication cable line to the stranding pitch should be less than 120mm, and corresponds to the same layer adjacent lines Different pitches to reduce crosstalk. 3.1.7 communication cables insulated cores and stranding element should be obvious identification, identification numbers or choose the color according to different requirements ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13029.3-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 13029.3-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13029.3-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13029.3-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13029.3-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13029.3-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |