GB/T 13008-2010 English PDF

US$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13008-2010: Technical specification for mixed and axial flow pumps
Status: Valid

GB/T 13008: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 13008-2010	419	Add to Cart	3 days	Technical specification for mixed and axial flow pumps	Valid
GB/T 13008-1991	639	Add to Cart	5 days	Technical specifications for mixed and axial flow pumps	Obsolete

Similar standards

JB/T 6879   GB/T 7782   JB/T 13977   GB/T 45819   GB/T 13006   GB/T 13007   

Basic data

Standard ID: GB/T 13008-2010 (GB/T13008-2010)
Description (Translated English): Technical specification for mixed and axial flow pumps
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J71
Classification of International Standard: 23.080
Word Count Estimation: 18,126
Date of Issue: 2010-09-26
Date of Implementation: 2011-02-01
Older Standard (superseded by this standard): GB/T 13008-1991
Quoted Standard: GB/T 699; GB/T 700; GB/T 1184; GB/T 1220; GB/T 2100; GB/T 3216; GB/T 4237; GB/T 7021; GB/T 9112; GB/T 9239.1; GB/T 9439; GB/T 11352; GB/T 13384; JB/T 4297; JB/T 6397; JB/T 8097; JB/T 8098
Regulation (derived from): National Standard Approval Announcement 2010 No.6 (Total No.161)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the mixed-flow pump, axial flow pump (hereinafter referred to as the pump) order conditions, technical requirements, factory inspection and testing requirements and face performance test rules. This standard applies to transport water or physical and chemical properties similar to water pumps and fluid transport seawater pump. Conveying the liquid temperature not higher than 50��C.

GB/T 13008-2010: Technical specification for mixed and axial flow pumps

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical specification for mixed and axial flow pumps ICS 23.080 J71 National Standards of People's Republic of China Replacing GB/T 13008-1991 Francis pumps, axial flow technical conditions Issued on. 2010-09-26 2011-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Ordering Condition 2 5 2 Technical Requirements 5.1 General 2 5.2 Performance 2 5.3 Design of 3 5.4 Main parts and materials 5 5.5 Manufacturing 5 6 factory inspection and testing 10 6.1 General 10 6.2 Testing and Materials 10 6.3 10 pump test and inspection 7 Performance Test Rule 11 7.1 General 11 7.2 Type tests 11 7.3 Contract Test 11 Model 7.4 or field test 11 8 11 warranty period 9 signs, packaging, transportation and storage 11 Appendix A (informative) mixed flow pumps, axial flow data table 13

Foreword

This standard is GB/T 13008-1991 "Francis pumps, axial flow pump technical conditions" amendments. This standard compared with GB/T 13008-1991 main changes are as follows. --- This standard GB/T 1.1-2000 standard format editor; --- Increased directory, preface; --- Modify the scope of the standard (see Chapter 1); --- Updated standard normative references press GB/T 1.1-2000 standard adds introductory phrase (see Chapter 2); --- Improve the term "semi-regulated" and "full adjustment" is defined (see Chapter 3); --- Increased the order conditions (see Chapter 4); --- Adds several factors to determine the prime mover rated performance should be considered (see 5.3.1.1); --- Clear the impeller parts do static balance, and an increase in provisions adjustable static balance test impeller blade angle (see 5.3.3); --- Increased requirements for pressure parts connected by bolts (see 5.3.4.3); --- Increasing the value of the sealing ring gap between the axial seal type when using specified (see 5.3.7.1); --- Open and modify the provisions of semi-open impeller clearance value cylindrical impeller housing (see 5.3.7.2); --- Increased computing bearings, lubrication, bearings temperature control requirements (see 5.3.9.1); --- Increased the horizontal and inclined guide vane pump guide bearing requirements (see 5.3.9.4.2); --- Increased role in the calculation of the flange (import and export) Requirements on external forces and torques (see 5.3.12); --- Increased requirements axis protective measures (see 5.3.14); --- Modify the main parts of the material requirements (see 5.4); --- Improve the pump vibration measurement requirements (see 6.3.3.4); --- Increased requirements for inspection and final inspection (see 6.3.4,6.3.5); --- 5.2.1 modified 5.2.4,5.3.2 ~ ~ ~ 5.3.11,5.3.13,5.5,6.1,6.2,6.3.1 6.3.3, Chapter 7 and other provisions Part of the content. Appendix A of this standard is an informative annex. This standard replaces GB/T 13008-1991. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pump (SAC/TC211) centralized. This standard was drafted. on KSB Pumps Co., Ltd., Shanghai East Pump (Group) Co., Ltd. Hai Kai-chuen, Pump (Group) have Limited, Shanghai Liancheng (Group) Co., Ltd., Wuhan Pump Co., Ltd., Ebara pump Bo Pump Co., Limited Zhejiang Pump Plant Division, Hangzhou Alkali Pump Co., Ltd., Shenyang Institute of pumps. The main drafters of this standard. Pan again Bing, Liu Weiwei, Xiaogong Huai, Yu Zelong, Weihua Tang, Zhangxue Sen, Yu Weiping, single-Jun, Zhou Dynasty, SCIENS, yellow root, Han Zhong Bao, in one hundred Fang, Zhao Baokui, CHEN Yu-hua. This standard replaces the standards previously issued as follows. --- GB/T 13008-1991. Francis pumps, axial flow technical conditions

1 Scope

This standard specifies the mixed-flow pump, axial flow pump (hereinafter referred to as the pump) ordering conditions, technical requirements, the factory inspection and testing requirements and performance test Inspection rules. This standard applies to transport water or physical and chemical properties similar to liquid water and the pump delivery seawater pump. Delivery temperature of the liquid Not more than 50 ℃. When present conflict between the technical requirements of more than one file, the following order shall determine the suitability of each file. a) orders; b) the data table (see Appendix A); c) of this standard; d) orders other criteria mentioned.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 699 high-quality carbon structural steel GB/T 700 carbon structural steel GB/T 1184 shape and position tolerances without individual tolerance value GB/T 1220 stainless steel rods GB/T 2100 general purpose corrosion resistant steel castings (GB/T 2100-2002, eqvISO 11972.1998) GB/T 3216 rotary power pump hydraulic performance acceptance tests - Grades 1 and 2 (GB/T 3216-2005, ISO 9906.1999, MOD) GB/T 4237 hot-rolled stainless steel sheet and strip GB/T 7021 centrifugal Terminology GB/T 9112 steel pipe flanges with type parameters GB/T 9239.1 Mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. Specification and balance tolerance test (GB/T 9239.1-2006, ISO 1940-1.2003, IDT) GB/T 9439 Gray Iron Castings GB/T 11352 Carbon steel castings for general engineering purposes GB/T 13384 mechanical and electrical products packaging General technical conditions JB/T 4297 painting pump technical conditions JB/T 6397 Large carbon structural steel forgings Vibration Measurement JB/T 8097 pump and Evaluation Method Noise measurement JB/T 8098 pump and Evaluation Method

3 Terms and Definitions

GB/T 7021 regulations and the following terms and definitions apply to this standard. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13008-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13008-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13008-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13008-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 13008-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13008-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.