GB/T 10597-2022 English PDF

US$569.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10597-2022: Hoisting hoister
Status: Valid

GB/T 10597: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 10597-2022	569	Add to Cart	5 days	Hoisting hoister	Valid
GB/T 10597-2011	919	Add to Cart	4 days	Hoisting hoister	Obsolete
GB/T 10597.1-1989	399	Add to Cart	3 days	Water gatehoister--Types and basic parameters	Obsolete

Similar standards

GB/T 6068   GB/T 12602   GB/T 10051.2   GB/T 45374   GB/T 23723.5   

Basic data

Standard ID: GB/T 10597-2022 (GB/T10597-2022)
Description (Translated English): Hoisting hoister
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J80
Word Count Estimation: 29,297
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 10597-2022: Hoisting hoister

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Hoisting hoister ICS 53.020.99 CCSJ80 National Standards of People's Republic of China Replacing GB/T 10597-2011 Hoist type hoist Published on 2022-07-11 2023-02-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Type 3 5 Basic parameters8 6 Technical requirements 15 7 Test methods 20 8 Inspection rules 23 9 Marking, packaging, transportation and storage 24 Reference 25

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document replaces GB/T 10597-2011 "Winding Hoist", compared with GB/T 10597-2011, except for structural adjustment and editing In addition to the sexual changes, the main technical changes are as follows. a) terms and definitions have been changed (see Chapter 3, Chapter 3 of the.2011 edition); b) Change the hoist from the original singleness to the diversity (see Chapter 4, Chapter 4 of the.2011 edition); c) On the basis of the original single-speed hoist hoist, a multi-speed hoist hoist is added (see 4.3); d) The schematic diagram of the gantry hoist and the basic parameters of the gantry hoist are added [see Figure 4c) and Table 7]; e) Change the opening and closing speed of the hoist to be divided according to the operating period (see Chapter 5, Chapter 5 of the.2011 edition); f) Increased the hoisting capacity of the hoist (see Chapter 5); g) The power supply requirements in the working environment conditions of the hoist are added (see 6.1.1); h) The performance requirements for the braking system of the hoisting mechanism of the hoist are changed (see 6.3.2, 6.3.2 of the.2011 edition); i) Added the requirements for the hoist safety monitoring and management system (see 6.3.17); j) Added requirements for static load test (see 6.3.19) and dynamic load test (see 6.3.20) of hoists; k) Changed the requirements for the reel in the main parts of the hoist (see 6.4.5, 6.4.5.1 of the.2011 edition); l) The connection requirements for the main components of the hoist are added (see 6.5); m) Added the requirements for the electrical equipment system of the hoist (see 6.7.1), the hydraulic station of the hydraulic grabbing beam and the relevant requirements for its electric control equipment (see 6.7.7); n) Changed the test method (see Chapter 7, Chapter 7 of the.2011 edition), inspection rules (see Chapter 8, Chapter 8 of the.2011 edition). Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Standardization Technical Committee of Hoisting Machinery (SAC/TC227). This document is drafted by. Hubei Xianning Sanhe Electromechanical Co., Ltd., Beijing Hoisting and Transportation Machinery Design and Research Institute Co., Ltd., Beijing Kezhengping Engineering Technology Testing Research Institute Co., Ltd., China Water Resources and Hydropower Jiajiang Hydraulic Machinery Co., Ltd., Huadian Zhengzhou Machinery Design and Research Institute Co., Ltd., Beijing Hoisting and Transportation Machinery Design and Research Institute Co., Ltd. Henan Branch, China Yangtze Power Co., Ltd., Jiangxi Huawu System Actuator Co., Ltd., Weite Technology Co., Ltd., Henan Weihua Heavy Machinery Co., Ltd., Xinxiang Lifting Equipment Factory Co., Ltd. Company, Jiangxi Hoisting Machinery Factory Co., Ltd., Xi'an Aerospace Automation Co., Ltd. The main drafters of this document. Wan Yan, Lin Fukui, Li Kehua, Zhang Pei, Lei Bangyao, Wan Liwen, Li Qijiang, Zhang Li, Wei Xiaoxiang, Du Junhua, Li Bin, Hu Meiling, Long Hongxin, Li Xiang, Zeng Xingwen, Yi Chunhui. The previous versions of this document and its superseded documents are as follows. ---First published in 1989 as GB/T 10597.1-1989, GB/T 10597.2-1989; ---The first revision in.2011 was GB/T 10597-2011; ---This is the second revision. Hoist type hoist

1 Scope

This document specifies the type, basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of hoisting hoists. This document is applicable to the fixed or closed gates and trash racks of water conservancy and hydropower projects, which are mainly driven by electric power and adopt wire rope hoisting method. Mobile hoist.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 699 High Quality Carbon Structural Steel GB/T 755 Rotating Electric Motor Rating and Performance GB/T 1176 Cast copper and copper alloys GB/T 1184 shape and position tolerances do not note tolerance values GB/T 1228 High-strength hexagon head bolts for steel structures GB/T 1229 High-strength hex nuts for steel structures GB/T 1230 High-strength washers for steel structures GB/T 1231 Technical Specifications for High Strength Large Hexagon Head Bolts, Large Hexagon Nuts and Washers for Steel Structures GB/T 1804 General Tolerances Unmarked Tolerances of Linear and Angular Dimensions GB/T 3181 Paint Film Color Standard GB/T 3323.1 Nondestructive testing of welds - Radiographic testing - Part 1.Film technology for X and gamma rays GB/T 3478.1 Cylindrical spur involute splines (metric module flank fit) Part 1.General GB/T 3632 Torsional shear type high-strength bolt connection pair for steel structure GB/T 3811-2008 Crane Design Specification GB/T 4323 elastic sleeve pin coupling GB/T 5226.32 Mechanical and Electrical Safety Mechanical and Electrical Equipment Part 32.Technical Requirements for Hoisting Machinery GB/T 5272 Plum-shaped elastic coupling GB/T 5972 Crane wire rope maintenance, maintenance, inspection and scrapping GB/T 5973 Wedge joint for steel wire rope GB/T 5974.2 Heavy-duty ferrules for wire ropes GB/T 5975 Pressure plate for steel wire rope GB/T 5976 Wire rope clip GB/T 8918 Steel wire ropes for important purposes GB/T 8923.1 Visual assessment of surface cleanliness of steel surface preparations before coating - Part 1.Uncoated steel The rust grade and treatment grade of the surface and the steel surface after the full removal of the original coating GB/T 9286 Paint and varnish cross-cut test GB/T 10095 (all parts) Cylindrical gear precision system GB/T 10183.1 Tolerances for Crane Wheels and Tracks for Carts and Trolleys - Part 1.General ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10597-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10597-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10597-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10597-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 10597-2022?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10597-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.