GB/T 10190-2012 English PDFUS$534.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10190-2012: Fixed capacitors for use in electronic equipment -- Part 16: Sectional specification -- Fixed metallized polypropylene film dielectric d.c. capacitors Status: Valid GB/T 10190: Historical versions
Basic dataStandard ID: GB/T 10190-2012 (GB/T10190-2012)Description (Translated English): Fixed capacitors for use in electronic equipment -- Part 16: Sectional specification -- Fixed metallized polypropylene film dielectric d.c. capacitors Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L11 Classification of International Standard: 31.060.30 Word Count Estimation: 27,242 Older Standard (superseded by this standard): GB/T 10190-1988 Quoted Standard: GB/T 2471-1995; IEC 60068-1; IEC 60384-1; IEC 60384-16-1; IEC 60410; ISO 3 Adopted Standard: IEC 60384-16-2005, IDT Regulation (derived from): National Standards Bulletin No. 28 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard applies to electronic devices with metallized polypropylene dielectric fixed capacitors. These capacitors can have depends on the conditions of use of the " self-healing properties ", and mainly used in the DC voltage. AC voltage and pulse c GB/T 10190-2012: Fixed capacitors for use in electronic equipment -- Part 16: Sectional specification -- Fixed metallized polypropylene film dielectric d.c. capacitors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Fixed capacitors for use in electronic equipment Part 16. Sectional specification Fixed metallized polypropylene film dielectric dccapacitors ICS 31.060.30 L11 National Standards of People's Republic of China Replacing GB/T 10190-1988 Fixed capacitors for use in electronic equipment Part 16. Sectional specification - Fixed metallized polyethylene Propylene film DCcapacitor Part 16. Sectionalspecification-Fixedmetalized (IEC 60384-16.2005, IDT) Issued on. 2013-02-15 2012-11-05 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 General 1 1.1 Scope 1 1.2 Objective 1 1.3 Normative references 1 1.4 detail specification shall specify the content of 2 1.5 Terms and Definitions 2 1.6 Flag 3 Priority 4 2 ratings and characteristics 2.1 Priority 4 Characteristics 2.2 Priority Rating 4 3 Quality assessment procedures 5 3.1 The initial stage of manufacture 5 Structurally similar elements 5 3.2 3.3 Certified records of released lots 5 5 3.4 Qualification approval 3.5 Quality conformance inspection 11 4 13 test and measurement procedures 4.1 13 appearance and dimensional inspection 4.2 Electrical Test 13 16 4.3 Terminal Strength 4.4 Resistance to soldering heat 16 4.5 weldability 16 4.6 Rapid change of temperature 16 16 4.7 Vibration 16 4.8 Collision 4.9 Shock 17 4.10 Climatic sequence 17 Steady heat 18 4.11 4.12 Durability 18 4.13 19 charge and discharge 4.14 Solvent element 20 4.15 flag solvent 20 References 21Foreword"Fixed capacitors for use in electronic equipment" series of national standards divided into the following sections. --- Part 1. Generic specification (GB/T 2693-2001, idt IEC 60384-1.1999); --- Part 2. Sectional specification - Fixed metallized polyethylene terephthalate film dielectric dc capacitors (GB/T 7332-2011 / IEC 60384-2.2005); --- Part 2-1. Blank detail specification - Fixed metallized polyethylene terephthalate film dielectric dc capacitors - Assessment level E and EZ (GB/T 7333-2012/IEC 60384-2-1.2005); --- Part 3. Sectional specification for surface mounting MnO2 solid electrolyte capacitors - (IEC 60384-3.2007); --- Part 3-1. Blank detail specification surface mount MnO2 solid electrolyte tantalum capacitors - Assessment level EZ (IEC 60384-3-1.2007); --- Part 4. Sectional specification solid and non-solid electrolyte aluminum electrolytic capacitors (GB/T 5993-2003/IEC 60384-4. 1998, No. 1 amendments.2000); --- Part 4-1. Blank detail specification non-solid electrolyte aluminum capacitors - Assessment level EZ (GB/T 5994-2003 / IEC 60384-4-1.2000); --- Part 4-2. Blank detail specification solid (MnO2) electrolyte aluminum electrolytic capacitors - Assessment level EZ (IEC 60384-4-2.2007); --- Part 6. Sectional specification - Fixed metallized polypropylene film dielectric dc capacitors (IEC 60384-6.2005); --- Part 6-1. Blank detail specification - Fixed metallized polypropylene film dielectric dc capacitors (IEC 60384-6-1.2005); --- Part 7. Sectional specification metal foil polystyrene film dielectric dc capacitors (GB/T 10185-2012); --- Part 7-1. Blank detail specification polystyrene film dielectric metal foil dc capacitors - Assessment level E (GB/T 10186-2012); --- Part 8. Sectional specification Fixed capacitors of ceramic dielectric, Class 1 (GB/T 5966-2011/IEC 60384-8.2005); --- Part 8-1. Blank detail specification Fixed capacitors of ceramic dielectric, Class 1 - Assessment level EZ (GB/T 5967-2011 / IEC 60384-8-1.2005); --- Part 9. Sectional specification Fixed capacitors of ceramic dielectric, Class 2 (GB/T 5968-2011/IEC 60384-9.2005); --- Part 9-1. Blank detail specification Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ (GB/T 5969-2012 / IEC 60384-9-1.2005); --- Part 11. Sectional specification metal foil polyethylene terephthalate film dielectric dc capacitors (IEC 60384-11.2008); --- Part 11-1. Blank detail specification metal foil polyethylene terephthalate film dielectric dc capacitors (IEC 60384-11-1.2008); --- Part 12. Sectional specification metal foil polycarbonate film dielectric dc capacitors (GB/T 10679-1995 / IEC 60384-12. 1988); --- Part 12-1. Blank detail specification polycarbonate film dielectric metal foil dc capacitors - Assessment level E (GB/T 10680-1995/IEC 60384-12-1. 1988); --- Part 13. Sectional specification polypropylene film dielectric metal foil dc capacitors (IEC 60384-13.2006); --- Part 13-1. Blank detail specification polypropylene film dielectric metal foil dc capacitors - Assessment level E (IEC 60384-13-1.2006); --- Part 14. Sectional specification curb the power of electromagnetic interference with a fixed capacitor (GB/T 14472-1998, idt IEC 60384-14. 1993, No. 1 amendments.1995); --- Part 14-1. Blank detail specification curb the power of electromagnetic interference capacitors - Assessment level D (GB/T 14473- 1998, idt IEC 60384-14-1.1993); --- Part 15. Sectional specification non-solid or solid electrolyte capacitors - (GB/T 7213-2003, idt IEC 60384- 15. 1982, No. 1 amendments. 1987, No. 2 amendments.1992); --- Part 15. Blank detail specification non - solid electrolyte and foil electrode tantalum capacitors Assessment level E (GB/T 12794- 1991, idt IEC 60384-15-1. 1984); --- Part 15. Blank detail specification non-solid electrolyte and porous anode tantalum capacitors Assessment level E (GB/T 12795- 1991, idt IEC 60384-15-2. 1984); --- 15-3. Blank detail specification solid electrolyte and porous anode tantalum capacitors Assessment level E (GB/T 7214- 2003/IEC 60384-15-3.1992); 16.2005); --- Part 16-1. Blank detail specification metallized polypropylene film dielectric dc capacitors - Assessment levels E and EZ (GB/T 10191-2011/IEC 60384-16-1.2005); --- Part 17. Sectional specification - Fixed metallized polypropylene film dielectric ac and pulse capacitors (IEC 60384-17.2005); --- Part 17-1. Blank detail specification metallized polypropylene film dielectric ac and pulse capacitors - Assessment level EZ (IEC 60384-17-1.2005); --- Part 18. Sectional specification solid (MnO2) and non-solid electrolyte sheet aluminum fixed capacitors (GB/T 17206-1998, idt IEC 60384-18.1993, No. 1 amendments.1998); --- Part 18-1. Blank detail specification surface mount solid (MnO2) electrolyte aluminum capacitors - Assessment level EZ (GB/T 17207-2012/IEC 60384-18-1.2007); --- Part 18. Blank detail specification sheet of non-solid electrolyte aluminum capacitors - Assessment level E (GB/T 17208- 1998, idt IEC 60384-18-2.1993); --- Part 19. Sectional specification surface mount metallized polyethylene terephthalate film dielectric dc capacitors (IEC 60384-19.2006); --- Part 19-1. Blank detail specification surface mount metallized polyethylene terephthalate film dielectric dc capacitors Assessment level E (IEC 60384-19-1.2006); --- Part 21. Sectional specification Class 1 surface mount multilayer ceramic capacitors fixed (GB/T 21041-2007/IEC 60384- 21.2004); --- Part 21-1. Blank detail specification Class 1 surface mount multilayer ceramic capacitors - Assessment level EZ (GB/T 21038-2007/IEC 60384-21-1.2004); --- Part 22. Sectional specification Class 2 surface mount multilayer ceramic capacitors fixed (GB/T 21042-2007/IEC 60384- 22.2004); --- Part 22-1. Blank detail specification Class 2 surface mount multilayer ceramic capacitors - Assessment level EZ (GB/T 21040-2007/IEC 60384-22-1.2004). This is Part 16 "Fixed capacitors for use in electronic equipment" series of national standards. This section drafted in accordance with the rules of GB/T 1.1-2009 and GB/T 20000.2-2009 given. This section uses the translation method identical with IEC 60384-16.2005 "Fixed capacitors for use in electronic equipment - Part 16. Sectional specification gold Metallized polypropylene film dielectric dc capacitors. " Consistency correspondence between this part of international documents and normative references of our files are as follows. --- GB/T 321-2005 priority number and priority number system (ISO 3. 1973, IDT); --- GB/T 2421.1-2008 Environmental testing for electric and electronic products overview and guidance (IEC 60068-1. 1988, IDT); --- GB/T 2693-2001 Fixed capacitors for use in electronic equipment - Part 1. Generic specification (idt IEC 60384-1.1999); --- GB/T 10191-2011 Fixed capacitors for use in electronic equipment - Part 16-1. Blank detail specification - Fixed metallized polypropylene Film dielectric dc capacitors - Assessment levels E and EZ (IEC 60384-16-1.2005, IDT). This part made the following editorial changes. --- Remove the IEC foreword; --- The standard term to this section. This Part replaces GB/T 10190-1988. This section compared with the GB/T 10190-1988, the main changes are as follows. --- Increased metallized polypropylene film dielectric dc capacitors - Assessment level EZ; --- Assessment level E of A1, A2 level checks each packet IL adjusted S-3, an increase of A0 test packet; --- Increased solvent resistance test and flag solvent component tests, etc; --- Discharge test increased radial, axial leads the capacitor charging and discharging rate du/dt test value; --- Added "upper category temperature 105 ℃"; --- 2.2.6 Rated temperature was changed to "standard rated temperature is 85 ℃; for the upper category temperature is 70 ℃ who rated temperature Degrees 70 ℃ "; --- Amplitude of the vibration test, impact test acceleration and peak acceleration collision test were adjusted to "0.75mm or 100m/s2 "," 400m/s2 or 100m/s2 "and" 300m/s2,500m/s2,1000m/s2 "; --- Table 12 "upper category temperature Features", 70 ℃ when the temperature characteristics of capacitance was adjusted to -2.5% ≤ΔCC ≤0 This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This section is under the jurisdiction of the National electronic equipment with a resistor and capacitor Standardization Technical Committee (SAC/TC165). This section is drafted. Hebi City, central China Electronic Science and Technology Co., Ltd. The main drafters of this section. Fan Gold River, Ning Xiaobo, ZHANG Su-xia, Li Sulan, Dubao Yu, Li Jiantao. This part of the standard replaces the previous editions are. --- GB/T 10190-1988. Fixed capacitors for use in electronic equipment Part 16. Sectional specification - Fixed metallized polyethylene Propylene film DCcapacitor1 General1.1 Scope This section applies to an electronic device with metallized polypropylene dielectric capacitors. These capacitors may have depends on the conditions of use of "self-healing characteristics", and the main reduction in the use of direct current. AC voltage and pulse Capacitor is not included in this section, which is included in the IEC 60384-17 "Fixed capacitors for use in electronic equipment - Part 17. Sectional specification gold Metallized polypropylene film dielectric ac and pulse capacitors. " When applicable 50Hz maximum power 500VA, maximum peak voltage of 2500V. Capacitor includes two performance levels, level 1 Long life use, grade 2 for general use. Electromagnetic interference suppression capacitors are not included in this section, which is included in the IEC 60384-14 "Fixed capacitors for use in electronic equipment Part 14. Sectional specification Fixed electromagnetic interference suppression capacitors. " Electric shock IEC 60065 is included in the capacitor, the capacitor includes fluorescent lamps and motors in IEC 33 and IEC 34 technical committees The congregation. 1.2 Purpose The purpose of this section is to this type of capacitor predetermined priority ratings and characteristics, and the IEC 60384-1 "Fixed electronic equipment Capacitors - Part 1. Generic specification ", select the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements. When the detail specification referenced test severities and requirements prescribed in this section, this section shall have the same or a higher level of performance, not It allows to reduce the level of performance. 1.3 Normative References The following documents for the application of this section is essential. For dated references, only the edition date of this Part apply to Minute. For undated references, the latest edition (including any amendments) apply to this section. GB/T 2471-1995 resistors and capacitors priority number and priority coefficient (idt IEC 60063. 1963, including the repair order No. (1967), No. amendments (1977)) IEC 60068-1 Environmental testing for electric and electronic products and Overview Guide (Environmentaltesting-Part 1. Generaland guidance) IEC 60384-1 Fixed capacitors for use in electronic equipment - Part 1. Generic specification (Fixedcapacitorsforuseinelectronic equipment-Part 1. Genericspecification) IEC 60384-16-1 Fixed capacitors for use in electronic equipment - Part 16-1. Blank detail specification. Fixed metallized polypropylene film dielectric straight Stream capacitors - Assessment levels E and EZ (Fixedcapacitorsforuseinelectronicequipment-Part 16-1. Blank detailspecification. Fixedmetalizedpolypropylenefilmdielectricd.c.capacitorsAssessmentlevelsE andEZ) IEC 60410 count inspection Sampling plans and procedures (SamplingplansandproceduresforInspectionbyAttribute) ISO 3 priority number and priority number system (Preferrednumbers-Seriesofpreferrednumbers) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10190-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 10190-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10190-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10190-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10190-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10190-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
