GB/T 10123-2022 English PDF

US$634.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10123-2022: Corrosion of metals and alloys - Vocabulary
Status: Valid

GB/T 10123: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 10123-2022	634	Add to Cart	6 days	Corrosion of metals and alloys - Vocabulary	Valid
GB/T 10123-2001	RFQ	ASK	5 days	Corrosion of metals and alloys -- Basic terms and definitions	Obsolete
GB/T 10123-1988	RFQ	ASK	6 days	Metal--Terms and definition of corrosion and protection	Obsolete

Similar standards

GB/T 7998   GB/T 10125   GB/T 13448   GB/T 20854   

Basic data

Standard ID: GB/T 10123-2022 (GB/T10123-2022)
Description (Translated English): Corrosion of metals and alloys - Vocabulary
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H25
Word Count Estimation: 36,328
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 10123-2022: Corrosion of metals and alloys - Vocabulary

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Corrosion of metals and alloys -- Vocabulary ICS 77.060 CCSH25 National Standards of People's Republic of China Replacing GB/T 10123-2001 Corrosion Terms for Metals and Alloys (ISO 8044.2020, IDT) Published on 2022-04-15 2022-11-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document replaces GB/T 10123-2001 "Basic Terms and Definitions of Corrosion of Metals and Alloys", which is in line with GB/T 10123-2001 In addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Adjusted the scope of application of this document, and added Note 1 and Note 2 to Chapter 1 (see Chapter 1, Chapter 1 of the.2001 edition); --- Delete some terms and definitions in the.2001 edition (see 2.11, 2.14, 2.22~2.25, 2.29~2.31, 3.7, 3.13, 3.24, 3.28, 3.36, 3.37, 3.39, 3.40, 3.42~3.44, 3.47, 6.1.19, 6.1.20, 6.1.25~6.1.28, 6.2.3, 6.2.6, 6.28, 6.29, 6.2.13, 6.2.15~6.2.23, 6.4.12); --- Added some terms and definitions (see 3.20~3.24, 4.36~4.53, 5.10~5.14, 6.6~6.9, 7.1.19, 7.1.24~ 7.1.45, 7.2.17~7.2.18); --- Modified some terms and definitions (see 3.4, 3.16, 3.25, 3.26, 7.1.17, 7.3.4, 7.3.5, 2.4, 2.18,.2001 edition 2.27, 2.28, 6.1.17, 6.3.4, 6.3.5); --- Modified some terms (see 3.9, 3.17, 4.25, 4.27, 4.28, 4.31, 5.1, 6.2, 7.1.21, 7.2.4, 2.9,.2001 edition 2.19, 3.29, 3.31, 3.32, 3.35, 4.1, 5.2, 6.1.22, 6.2.5); --- Modified some definitions (see 3.2, 4.5, 4.6, 5.7, 7.1.18, 2.2, 3.5, 3.6, 4.7, 6.1.18 of the.2001 edition); --- Adjusted the order of some terms (see 4.9, 4.10, 7.1.7, 7.1.8, 7.1.9, 3.10, 3.11, 6.1.7, 6.1.8, 6.1.9); --- Revised the title of the original Chapter 4 (see Chapter 5, Chapter 4 of the.2001 edition); --- Added Appendix A, and adjusted the original Figure 1 and Figure 2 to Figure A.1 and Figure A.2 respectively (see Appendix A). This document is equivalent to ISO 8044.2020 "Corrosion Terminology for Metals and Alloys". The following minimal editorial changes have been made to this document. a) Added references; b) Added Chinese Pinyin index. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Iron and Steel Association. This document is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183). This document is drafted by. Institute of Metallurgical Industry Information Standards, Institute of Metal Research, Chinese Academy of Sciences, Qingdao Steel Research Nanogram Detection and Protection Technology Co., Ltd. Company, Beijing University of Science and Technology, State Nuclear Zirconium and Hafnium Physical and Chemical Testing Co., Ltd., CRRC Qingdao Sifang Locomotive and Rolling Stock Co., Ltd., Shougang Group Co., Ltd. Company, Jiangsu Institute of Quality and Standardization. The main drafters of this document. Hou Jie, Wang Zhenyao, Zhang Lei, Yang Zhaohui, Tian Zijian, Wang Jiabin, Sun Xiaoguang, Wang Jing, Li Qian, Li Min, Ding Guoqing, Li Xiaogang, He Jiajie, Sun Menghan, Jiang Shan. This document was first published in 1988, revised for the first time in.2001, and this is the second revision.

Introduction

The definitions in this document strike an appropriate balance between precision and brevity. The main purpose of this document is to provide information that can be used by all interested parties understood as definitions with the same meaning. Some of the corrosive terms in use today are conventional, but not always logical. Therefore, it is not possible to define certain terms in the form used in certain countries. Because of the occasional conflict between tradition and logic, some fixed Righteousness inevitably compromised. For example, the term "corrosion" is used to refer to the process, the result of the process and the damage caused by the process. In this document, corrosion is understood as excessive Procedure. Any detectable result of corrosion in any part of a corrosion system is referred to as a "corrosion effect". The term "corrosion damage" covers damage as Any damage to the function of the system composed of metal and the environment. Therefore, the term "corrosion protection" means that it is important to avoid corrosion damage without is to prevent corrosion. Because preventing corrosion is impossible in many cases, and sometimes unnecessary. Corrosion Terms for Metals and Alloys

1 Scope

This document defines corrosion-related terms widely used in modern science and technology. In addition, for some definitions also given concise notes. Note 1.The electrode potentials in this document apply to IUPAC (International Union of Theoretical and Applied Chemistry) rules. The term "metal" also includes alloys and other gold material. Note 2.Terms and definitions related to inorganic surface treatment of metals are given in GB/T 3138.

2 Normative references

There are no normative references in this document.

3 General terms for corrosion

3.1 corrosion Changes in the properties of metals and may often lead to impairment of the functionality of metals, the environment or the technical systems of which they are a part Physico-chemical interactions between the damaged metal and the environment. NOTE. This interaction is usually electrochemical in nature. 3.2 Corrosive medium corrosiveagent Substance that causes or promotes corrosion (3.1) when in contact with a given metal 3.3 corrosive environment An environment containing one or more corrosive media (3.2). 3.4 corrosion systemcorrosionsystem A system consisting of one or more metals and environmental elements that affect corrosion (3.1). NOTE. Certain elements of the environment may include. coatings, surface layers or other electrodes (7.1.2). 3.5 corrosioneffect Changes in any part of a corrosion system (3.4) due to corrosion (3.1). 3.6 corrosion damage Corrosive effects (3.5) that impair the functioning of metals, the environment or the technical systems of which they are a part. 3.7 corrosion failure Corrosion damage (3.6) leading to a complete loss of function of a technical system. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10123-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10123-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10123-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10123-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 10123-2022?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10123-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.