GB/T 10107.1-2012 English PDFUS$1079.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10107.1-2012: Cycloidal drives -- Part 1: Basic terminology Status: Valid GB/T 10107.1: Historical versions
Basic dataStandard ID: GB/T 10107.1-2012 (GB/T10107.1-2012)Description (Translated English): Cycloidal drives -- Part 1: Basic terminology Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J19 Classification of International Standard: 21.120 Word Count Estimation: 49,460 Older Standard (superseded by this standard): GB/T 10107.1-1988 Regulation (derived from): National Standards Bulletin No. 24 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the cycloid gear, the gear and the planetary gear needle basic terminology and standard definition. GB/T 10107 This part applies cycloid planetary transmission. GB/T 10107.1-2012: Cycloidal drives -- Part 1: Basic terminology---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS21.120 J19 National Standards of People's Republic of China Replacing GB/T 10107.1-1988 Cycloid drive - Part 1. Basic terminology Cycloidaldrives-Part 1. Basicterminology Issued on. 2013-03-01 2012-09-03 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Terms and definitions 1 3 cycloid [gear] round 18 4-pin [gear] round 32 5 cycloid planetary gear set 37 Index 40ForewordGB/T 10107 "cycloid planetary transmission" includes the following three parts. --- Part 1. Basic terminology; --- Part 2. graphical method; --- Part 3. Symbols of geometrical data. This is Part 1 GB/T 10107 in. Rules in this section in accordance with GB/T 1.1-2009 given draft. This Part replaces GB/T 10107.1-1988 "Cycloid drive basic terminology." This part of GB/T 10107.1- Compared to 1988, in addition to editorial amendments, the main changes are the following. --- Adding new terms and definitions (see 2.1.1.4, 2.1.1.5, 2.1.1.6, 2.4.2.5, 2.4.2.6, 5.1.2.2, 5.1.2.3); --- Increased synonyms part of the term (see 2.1.3.5, 3.2.1.7, 3.2.2.8, 3.3.2.7, 4.2.1.1, 4.2.2.1, 4.3.1.1, 4.3.2.1); --- Complement and extend the definition of the term minority content (see 2.1.1.2, 2.1.1.3); --- Adjusted increase in the content of Chapter 5; --- Improvement of standards of the section, subsection titles (see 3.1, 3.1.1, 3.1.2, 4.1, 4.1.1); --- Adjusted Synonyms part of the term (see 2.1.1, 2.1.1.3, 2.1.3.5, 2.4.2.2, 2.4.2.3, 2.4.2.4, 3.2.1.7, 3.2.2.8, 3.3.2.7, 4.2.1.1, 4.2.2.1, 4.3.1.1, 4.3.2.1). This section is proposed and managed by the China Machinery Industry Federation. This part of the main drafting unit. Hebei University, Tianjin Petrochemical General Machinery Research Institute. Participated in the drafting of this section. Tianjin reducer Plant Co., Ltd., Shanghai slowdown Machinery Co., Ltd., Jiangsu Stallone reducer shares Parts Limited, Thai-reducer Co., Ltd., Shandong Obo reducer Ltd., Zhangjiagang Second Textile Machinery Co., Ltd. The main drafters of this section. Dai Tianwei, Xuan Ping, Liu Zhixin, Ma Xiaojuan, Li Guoliang, Xu Qiguo. This part of the standard replaces the previous editions are. --- GB/T 10107.1-1988. Cycloid drive - Part 1. Basic terminology1 ScopeThis section GB/T 10107 provisions of the basic terminology and standard definitions cycloidal gear and pin gear planetary drive. This section GB/T 10107 applies to Cycloid Drive.2 Terms and definitions2.1 Kinematics defined kinematicdefinitions 2.1.1 Cycloidal gear and pin gear planetary transmission mechanism cycloidalgear, pinwheelandtheirplanetarygeardrivemech- anisms 2.1.1.1 Cycloid [gear] round cycloidalgear Tooth profile is accurate (or near) the cycloidal equidistant curved shape of the disc-shaped or annular gear (Figure 1, Figure 2). figure 1 figure 2 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10107.1-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 10107.1-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10107.1-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10107.1-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10107.1-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10107.1-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
