GB 36900.1-2018 English PDFUS$299.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 36900.1-2018: Ductile Cast Iron High Integrity Container for Low-and-Intermediate Level Radioactive Solid Wastes Status: Valid
Basic dataStandard ID: GB 36900.1-2018 (GB36900.1-2018)Description (Translated English): Ductile Cast Iron High Integrity Container for Low-and-Intermediate Level Radioactive Solid Wastes Sector / Industry: National Standard Classification of Chinese Standard: Z05 Word Count Estimation: 15,182 Date of Issue: 2018-11-19 Date of Implementation: 2019-03-01 Regulation (derived from): Ministry of Ecology and Environment Announcement No.50 of 2018; National Standard Announcement No.15 of 2018 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 36900.1-2018: Ductile Cast Iron High Integrity Container for Low-and-Intermediate Level Radioactive Solid Wastes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Low and medium level radioactive waste high integrity container - ductile iron container) 1ICS 13.030 Z 05 National Standards of People's Republic of China Low and medium level radioactive waste high integrity containers --Spheroidal graphite iron container Ductile Cast Iron High Integrity Container for Low-and-Intermediate Level Radioactive Solid Wastes Published on.2018-10-29 2019-3-1 implementation State Market Supervisory Administration Ministry of Ecology and Environment release ContentForeword. III 1 Scope.1 2 Normative references.1 3 Terms and Definitions 2 4 basic safety requirements..2 5 Product Performance Requirements..3 6 Inspection method. 4 7 Inspection rules.5 8 logo 6 9 Storage and transportation of products 6 Appendix A (Normative) Test Method for Corrosion Resistance of Ductile Iron.8 Appendix B (informative) Container model, specifications and dimensions..11ForewordTo implement the "Environmental Protection Law of the People's Republic of China" The Nuclear Safety Law of the Republic, do a good job in the safe disposal of low and medium level waste, prevent and control radioactive pollution, improve environmental quality, and protect Human health, the development of this standard. Low and medium level radioactive waste high integrity container series standard High integrity container standard made of three different materials composition. - "High-integrity container for low- and medium-level radioactive waste - ductile iron container" (GB 36900.1); - "High-integrity container for low- and medium-level radioactive waste - concrete container" (GB 36900.2); - "High-integrity container for low- and medium-level radioactive waste - cross-linked high-density polyethylene containers" (GB 36900.3). This standard is the first part of the "low and medium level radioactive waste high integrity container - ductile iron container" (GB 36900.1), stipulates the safety of high integrity containers made of nodular cast iron materials (hereinafter referred to as "spheroidal graphite cast iron containers") Seeking, performance requirements, testing methods and inspection rules, etc., and the model and size of the ductile iron container. Appendix A is a normative appendix. Appendix B is an informative annex. This standard is the first release. This standard is formulated by the Radiation Source Safety Supervision Department of the Ministry of Ecology and Environment, the Nuclear Facilities Safety Supervision Department, and the Science and Technology Standards Department. This standard is mainly drafted by. China Nuclear Power Engineering Co., Ltd., Beijing University of Science and Technology. This standard has been implemented since March 1,.2019. This standard is explained by the Ministry of Ecology and Environment. Low and medium level radioactive waste high integrity container--nodular cast iron container1 Scope of applicationThis standard specifies the safety requirements for high integrity containers made of ductile iron materials (hereinafter referred to as "spheroidal graphite iron containers"). Performance requirements, testing methods and inspection rules, etc., and the model and size of the ductile iron container. This standard applies to the design, manufacture, procurement, inspection and other activities of ductile iron containers. Ductile iron containers can be used for waste preparation, storage, disposal and management of low and medium level radioactive solid waste management processes. Transportation, does not apply to packaging containers containing high level waste or used as Type B and Type C packages.2 Normative referencesThe contents of this standard refer to the following documents or their terms. For undated references, the valid version applies. In this standard. For dated, date only versions apply to this standard. Safety regulations for near-surface disposal of low- and medium-level radioactive solid wastes GB 9132 GB 11806 Safe Transport Procedure for Radioactive Material GB 12711 Low and medium level radioactive solid waste packaging safety standards GB/T 228.1 Tensile test for metallic materials - Part 1. Test method for room temperature (ISO 6892.1998, MOD) GB/T 229 Metallic material Charpy pendulum impact test method (ISO 148-1.2006, MOD) GB/T 231.1 Brinell hardness test for metallic materials - Part 1. Test methods (ISO 6506-1.2005, MOD) GB/T 231.2 Brinell hardness test for metallic materials - Part 2. Examination and calibration of hardness testers (ISO 6506 -2.1999, MOD) GB/T 231.3 Metallic Brinell hardness test - Part 3. Calibration of standard hardness blocks ( ISO 6506 -3.1999, MOD) GB/T 1348-2009 Ductile iron castings (ISO 1083.2004, MOD) GB/T 2481.1 Determination and marking of abrasive grain size for bonded abrasives - Part 1 F220 GB/T 6060.1 Surface roughness comparison sample casting surface GB/T 6414 casting dimensional tolerance and machining allowance GB/T 9441 Ductile Iron Metallographic Examination GB/T 15219 Quality assurance of transportation and packaging of radioactive materials GB/T 16545 Corrosion of metals and alloys Corrosion of corrosion products on samples Classification of Radioactive Waste (Ministry of Environmental Protection, Ministry of Industry and Information Technology, National Defense Science and Technology Industry Bureau,.2017) 65)3 Terms and definitionsThe following terms and definitions apply to this standard. 3.1 high integrity container high integrity container It means that it can effectively contain the low and medium level radioactive solids contained in it for more than 300 years. a container for waste. High integrity containers can be made of different materials (eg concrete, ductile iron, high density polyethylene) Or composite material). 3.2 ductile iron ductile cast iron It refers to the cast iron in which the iron is spheroidized and inoculated, so that all or most of the graphite is spherical after solidification.4 basic safety requirements4.1 General safety requirements 4.1.1 High integrity containers can maintain radioactive content for more than 300 years under long-term storage or final disposal conditions. Inclusive performance. 4.1.2 The structural material of a high-integrity container shall be in accordance with the contents contained therein and the environmental conditions in which it is exposed (eg temperature, humidity, Corrosive medium, radiation field, sunlight exposure) compatible. If necessary, lining, jacket or coating can be placed inside and outside the container. The exhaust of the filter. 4.1.3 The structural design of high integrity containers should be considered for ease of handling, stacking and prevention of surface area water. 4.1.4 When used as a transport container, it should also meet the requirements of GB 11806. If necessary, additional shock absorbers can be added. 4.1.5 The design, procurement, manufacturing and other activities of high-integrity containers shall be prepared in accordance with the requirements of GB/T 15219. Examine the outline and follow it. 4.2 Special safety requirements 4.2.1 Requirements for content 4.2.1.1 The waste contained in the ductile iron container shall be low and medium level radioactive solid waste, waste meeting the final disposal requirements. The volume of free liquid in the bag should be less than 1% of the volume of solid waste. 4.2.1.2 The contents of the ductile iron container shall also meet the requirements of GB 9132, Classification of Radioactive Waste and other relevant standards. Claim. 4.2.2 Casting material requirements 4.2.2.1 The selection of ductile iron containers should consider the mechanical properties (such as strength, hardness, ductility, elongation, impact toughness), Factors such as the use environment and long-term corrosion resistance. 4.2.2.2 The mechanical properties of the casting materials of ductile iron containers shall meet the requirements of Table 1. Table 1 Mechanical properties of ductile iron Performance (cast sample) tensile strength Rm/MPa Specified plastic extension Stretch strength Elongation A/% Brinell hardness 1) HBW Minimum impact energy/J (V-shaped notch) Three sample mean values (min.) Rp0.2/MPa (min.) (min.) 370 240 12 120~175 12 (room temperature 23±5°C) 9 (room temperature 23±5°C) Note 1). The hardness index is for reference only and is not used as a material quality control indicator. 4.2.2.3 The graphite form of the casting material is mainly spherical, and the spheroidization level is not lower than the spheroidization level 3 specified in GB/T 9441. 4.2.2.4 The corrosion resistance of casting materials shall meet the requirements of Table A.3 of Appendix A. 4.2.3 Casting requirements 4.2.3.1 The thickness of ductile iron castings used in ductile iron containers shall be not less than 50 mm and not more than.200 mm. 4.2.3.2 Casting defects (such as cracks, cold partitions, shrinkage holes, slag inclusions, etc.) that affect the performance of castings are not allowed. 4.2.3.3 The types, quantities and ranges of defects allowed on the non-machined surface of the casting and inside the casting shall be in accordance with the casting of the ductile iron container. Design drawings, technical specifications. 4.2.3.4 The surface of the casting and the surface to be machined shall not be repaired by any means such as clogging, welding repair, infiltration, etc.5 Product performance requirements5.1 Models, specifications and dimensions 5.1.1 Model, specification and size requirements The type, specification and size of ductile iron containers should be standardized and serialized as much as possible. Recommended number of barrel and box containers See Appendix B for specifications. Users can use other sizes and sizes of ductile iron containers as needed, but the performance should meet this standard. Mandatory requirements of the standard. 5.1.2 Appearance quality The outer part of the ductile iron container shall not have protruding parts that hinder the stacking. The ductile iron container shall be designed and processed into a surface without The protruding portion is easy to decontaminate and prevents the structure of water collecting and water accumulation. 5.2 Container performance requirements 5.2.1 Operational performance Operational performance tests shall be carried out on the loading, unloading, lifting or tethering components of ductile iron containers in accordance with the provisions of 6.3.2. The work shall be trouble free and the components shall be free from damage after the performance test. 5.2.2 Stacking performance The stacking test or calculation analysis of the ductile iron container shall be carried out in accordance with the provisions of 6.3.3 to verify that the ductile iron container can be full. The requirements of the full stack code performance, the content should be no missing or diffuse. 5.2.3 Impact resistance Drop test or calculation analysis of ductile iron containers shall be carried out in accordance with the provisions of 6.3.4 to verify that the ductile iron containers are full For the impact resistance of the foot, the contents should be free of leakage or dispersion. 5.2.4 Anti-penetration performance The 1m drop rod test or calculation analysis shall be carried out on the ductile iron container in accordance with the provisions of 6.3.5 to verify that the ductile iron container can Sufficient to meet the requirements of penetration resistance, the contents should be free of leakage or dispersion. 5.2.5 Waterproof performance The spheroidal graphite iron container shall be tested for water spray in accordance with the provisions of 6.3.6 to verify its waterproof performance. After the water spray test, the spheroid The inner surface of the cast iron container should be free of water.6 Test methods6.1 Casting material performance test method 6.1.1 Sampling The casting material performance test shall be carried out with the cast test block. The sampling source and sampling quantity are in accordance with Chapter 8 of GB/T 1348-2009. Relevant requirements, the test results meet the requirements of Section 4.2.2 casting materials as qualified. 6.1.2 Test method 6.1.2.1 Tensile test Execute according to the provisions of GB/T 228.1. 6.1.2.2 Impact test The impact test is carried out in accordance with the provisions of GB/T 229. 6.1.2.3 Hardness test The hardness test is carried out in accordance with the provisions of GB/T 231.1, 231.2 and 231.3. 6.1.2.4 Metallographic test The metallographic test is carried out in accordance with the provisions of GB/T 9441. 6.1.2.5 Corrosion resistance test The corrosion resistance test is carried out in accordance with the provisions of Appendix A Test Method for Corrosion Resistance of Ductile Iron. 6.2 Casting inspection method 6.2.1 Geometric dimension and dimensional tolerance test 6.2.1.1 Visual measurement with a universal measuring tool with a precision of 0.5 mm. 6.2.1.2 The geometry and dimensions of the casting shall be in accordance with the provisions of the drawings. 6.2.1.3 The dimensional tolerance of castings shall be in accordance with the provisions of GB/T 6414. If there are special requirements, they can be executed according to the drawings or relevant technical requirements. Row. 6.2.2 Surface quality inspection 6.2.2.1 The castings shall be cleaned and trimmed according to the requirements of GB/T 1348-2009. 6.2.2.2 Residual requirements for remnant, sticky sand, oxide scale and internal cavity residue of the pouring riser shall comply with the requirements of the design technical specifications. 6.2.2.3 The surface roughness of castings shall comply with the requirements of GB/T 6060.1, or meet the requirements of design drawings or product technical specifications. 6.2.3 Non-destructive testing The non-destructive testing requirements for castings shall be carried out in accordance with the provisions of Chapter 11.4 of GB/T 1348-2009. 6.3 Container inspection method 6.3.1 Structural dimensions and visual inspection The dimensions of the structure are measured using a universal measuring tool with an accuracy of 0.5 mm. The appearance of the container is visually inspected and should conform to the design. Requirements for drawings or product specifications. 6.3.2 Operational performance test Ductile iron container contains a uniform solid material with a density of 2500kg/m3, with a filling factor of 95%, for the loaded container phase The closing member was operated for 50 consecutive times. 6.3.3 Stacking test The ductile iron container contains a uniform solid material with a density of 2500 kg/m3 and a filling factor of 95%. According to GB 11806 The stacking test is carried out and the stacking time is 24h. 6.3.4 Drop test The ductile iron container contains a uniform solid material with a density of 2500 kg/m3 and a filling factor of 95%. According to GB 11806 It is required to carry out the drop test. The free fall distance of the drop test should meet the test conditions in GB 11806 under normal conditions of transportation. The rule of the free fall distance of the bag. 6.3.5 1m drop test The ductile iron container contains a uniform solid material with a density of 2500 kg/m3 and a filling factor of 95%. According to GB 11806 It is stipulated to carry out the penetration test under normal conditions of transportation. 6.3.6 Water spray test The water spray test was carried out in accordance with the provisions of GB 11806.7 Inspection rules7.1 Type test 7.1.1 The sequence of the type test of ductile iron containers shall be carried out item by item according to Table 2. Each test may be carried out on one container. 7.1.2 After the type test of the ductile iron container is qualified, the design of the type test container can be adopted and the same processing worker The art is officially mass produced. 7.1.3 Type test requirements When one of the following conditions occurs in the production of ductile iron containers, a type test project shall be carried out. a) When the new product is put into production trial production; b) After formal production, if there are major changes in materials, structures and processes; c) After the product has been discontinued for a long time (more than one year), when the production is resumed; d) When there is a big difference between the factory inspection result and the type inspection result; e) When the user request or the national nuclear safety regulatory authority proposes that type inspection is required. Table 2 Type test items Serial number test item1 tensile test2 Impact test3 hardness test4 Metallographic test5 corrosion resistance test7 Casting size inspection8 Casting surface quality inspection9 Non-destructive testing of castings 10 container size check 11 container appearance check 12 operational performance test 13 stacking performance test 14 Impact resistance test 15 penetration test 16 drop test 17 1m drop test 18 water spray test 7.2 Factory inspection 7.2.1 The performance of the ductile iron container product shall meet the requirements of Chapter 5, and the structural dimensions and appearance inspection of the container shall be carried out one by one. The station performs non-destructive testing. Each batch of the same specification product is pumped 10% (at least one) for performance testing. 7.2.2 After passing the inspection, work cards, material certificates, product inspection reports and containers shall be issued for each ductile iron container. Certificate of conformity. 7.3 Decision rules 7.3.1 Type test judgment rules If all the tests are qualified, the inspection batch is judged to be qualified. If one item fails, the inspection lot is judged to be unqualified. 7.3.2 Factory inspection judgment rules If all the tests are qualified, the inspection batch is judged to be qualified. If one item fails, the inspection lot is judged to be unqualified.8 logo8.1 The outer surface marking of the ductile iron container shall comply with the provisions of GB 12711 regarding radioactive signs and labels. 8.2 The manufacturer or code, date of manufacture and batch number shall be identified on the outer surface of the ductile iron container. 8.3 The marking of ductile iron containers shall be conspicuous, clear and durable and shall not impair the performance of the container.9 Storage and transportation of products9.1 Product storage 9.1.1 Ductile iron containers should be stored on the foundation of the foundation. It should be placed vertically. The height of the stack should not exceed 6 layers. 9.1.2 Ductile iron containers shall be protected from chemical attack, harsh weather and external forces during storage. 9.2 Product Transportation 9.2.1 Ductile iron containers must be lightly handled by lifting tools when handling, loading and unloading. Appropriate measures should be taken when transporting, Fasten the ductile iron container to the transport and set the appropriate cushioning or isolation space between the ductile iron containers. Material or device to prevent collision and damage.Appendix A(normative appendix) Method for detecting corrosion resistance of ductile iron A1 Scope......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 36900.1-2018_English be delivered?Answer: Upon your order, we will start to translate GB 36900.1-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 36900.1-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB 36900.1-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
