GB/T 3260.8-2013 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3260.8-2013: Methods for chemical analysis of tin -- Part 8: Determination of zinc content -- Flame atomic absorption spectrometric method
Status: Valid

GB/T 3260.8: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 3260.8-2013	139	Add to Cart	3 days	Methods for chemical analysis of tin -- Part 8: Determination of zinc content -- Flame atomic absorption spectrometric method	Valid
GB 3260.8-1982	199	Add to Cart	2 days	Chemical analysis of tin--The PAN photometric method for determination of zinc	Obsolete

Similar standards

GB/T 3884.2   GB/T 3884.1   GB/T 4103.14   GB/T 3260.1   GB/T 3260.11   GB/T 3260.1   

Basic data

Standard ID: GB/T 3260.8-2013 (GB/T3260.8-2013)
Description (Translated English): Methods for chemical analysis of tin -- Part 8: Determination of zinc content -- Flame atomic absorption spectrometric method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H13
Classification of International Standard: 77.120.60
Word Count Estimation: 6,698
Older Standard (superseded by this standard): GB/T 3260.9-2000
Regulation (derived from): National Standards Bulletin No. 25 of 2013
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the determination of the amount of tin zinc by flame atomic absorption spectrometry. This standard applies to the determination of the amount of zinc tin. Measurement range of 0. 00020% to 0. 0050%.

GB/T 3260.8-2013: Methods for chemical analysis of tin -- Part 8: Determination of zinc content -- Flame atomic absorption spectrometric method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of tin Part 8.. Determination of zinc content Flame atomic absorption spectrometric method. ICS 77.120.60 H13 National Standards of People's Republic of China Replacing GB/T 3260.9-2000 Chemical analysis of tin Part 8. Determination of zinc contents Flame Atomic Absorption Spectrometry Part 8. Determinationofzinccontent- Issued on. 2013-12-17 2014-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 3260 "Methods for chemical analysis of tin" is divided into 14 parts. --- Part 1. Determination of copper content - Flame atomic absorption spectrometry; --- Part 2. Determination of iron content - 1,10-phenanthroline spectrophotometry; --- Part 3. Determination of bismuth content of potassium iodide spectrophotometric method and the flame atomic absorption spectrometry; --- Part 4. Determination of lead content by flame atomic absorption spectrometry; --- Part 5. Determination of antimony content - Malachite green spectrophotometry; --- Part 6. Determination of arsenic content - Malachite Green - arsenic heteropolyoxomolybdate spectrophotometry; --- Part 7. Determination of aluminum content electrothermal atomic absorption spectrometry; --- Part 8. Determination of zinc content - Flame atomic absorption spectrometry; --- Part 9. Determination of sulfur content of high frequency induction furnace combustion infrared absorption method; --- Part 10. Determination of cadmium content by flame atomic absorption spectrometry; --- Part 11. Determination of the amount of silver by flame atomic absorption spectrometry; --- Part 12. Determination of nickel content by flame atomic absorption spectrometry; --- Part 13. Determination of cobalt content by flame atomic absorption spectrometry; --- Part 14. Inductively coupled plasma atomic copper, iron, bismuth, lead, antimony, arsenic, aluminum, zinc, cadmium, nickel, cobalt and the amount of emitted light Spectroscopy. This section GB/T 3260 Part 8. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 3260.9-2000 "chemical analysis of tin Determination of zinc content." This section compared with the GB/T 3260.9-2000, major technical changes as follows. --- Zinc mass fraction of 0.00020% - 0.00050% of the sample to increase sample weight 2g; --- Text format has been modified; --- Increasing the repeatability and reproducibility content. The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized. This section is responsible for drafting unit. Yunnan Tin Group Co., Ltd., Guangxi China Tin Group Co., Ltd. This section is drafted. Yunnan Tin Group Co., Ltd., Tianjin Entry-Exit Inspection and Quarantine Bureau. Participated in the drafting of this section. Gaofeng Mining Co., Ltd., Beijing General Research Institute of Mining and Metallurgy. The main drafters of this section. Chenshu Lian, Su Aiping, from Madrid, Wang Hong, Liang Ming-chao, Huoxi Xiao Liang flash sitting Wupei Li, Jiang Tao seeking, Feng advanced, Wang Jun Feng, Shiru Xiang, Zhang Hongling. This part of the standard replaces the previous editions are. --- GB/T 3260.8-1982, GB/T 3260.9-1982; --- GB/T 3260.9-2000. Chemical analysis of tin Part 8. Determination of zinc contents Flame Atomic Absorption Spectrometry

1 Scope

GB/T 3260 provisions of this part of the tin-zinc flame atomic absorption spectrometric method for the amount. This section applies to the determination of tin in zinc content. Determination of the range of 0.00020% to 0.0050%.

2 Method summary

Samples with hydrochloric acid, nitric acid dissolved completely after in sulfuric acid, hydrochloric acid - hydrobromide exclude a large number of tin. Hydrochloric acid - nitric acid medium mixing Quality, the use of air - acetylene flame atomic absorption spectrometer at a wavelength of 213.9nm, measuring absorbance of zinc.

3 Reagents

Unless otherwise indicated, used in the analysis confirmed only for the gifted class pure reagents and deionized water or equivalent purity. 3.1 hydrochloride (ρ1.19g/mL). Nitrate 3.2 (ρ1.42g/mL). 3.3 sulfate (ρ1.84g/mL). 3.4 hydrobromide (ρ1.48g/mL). 3.5 sulfate (11). 3.6 hydrochloric acid - Mixed hydrobromic acid. hydrochloric acid hydrobromide (11). 3.7 hydrochloric acid - mixed nitric acid. hydrochloric acid, nitric acid (31), using now. 3.8 standard zinc stock solution. Weigh 0.1000g zinc metal (wZn≥99.99%) in 200mL beaker, add 20mL hydrochloric acid (11), completely dissolved by heating and then cooled, transferred to water 1000mL volumetric flask, was added 20mL of hydrochloric acid (3.1), diluted with water to the mark, Mixing, transferred to a plastic bottle storage solution 1mL containing 100μg zinc. 3.9 Zinc standard solution. Pipette 25.00mL standard zinc stock solution (3.8) in 250mL volumetric flask, was added 5mL hydrochloric acid (3.1), with Diluted with water to the mark, mix and transferred to a plastic bottle for storage. This solution 1mL containing 10μg zinc.

4 Instrument

Atomic absorption spectrometer, with zinc hollow cathode lamp. Under optimum working conditions for those who can reach the following indicators can be used. --- Characteristic concentration. a solution in the measurement matrix consistent solution, characterized in zinc concentration should be less than 0.011μg/mL. --- Precision. standard solution with the highest concentration of 10 times the absorbance measurements, the standard deviation should not exceed the average absorbance of 1.0%; With the lowest concentration of standard solution (not "zero" concentration of the standard) measuring the absorbance of 10 times, the standard deviation should not exceed the maximum 0.5% concentration of the standard average absorbance. --- Linear curve. A standard curve is divided into five sections according to concentration, absorbance difference of the absorbance difference between the highest and the lowest segment segment ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3260.8-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3260.8-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3260.8-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3260.8-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 3260.8-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3260.8-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.