GB 25540-2010 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 25540-2010: The national food safety standards of food additives Acesulfame potassium
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 25540-2010	209	Add to Cart	3 days	The national food safety standards of food additives Acesulfame potassium	Valid

Similar standards

GB 28303   GB 28307   GB 28308   GB 25533   GB 25537   GB 25532   

Basic data

Standard ID: GB 25540-2010 (GB25540-2010)
Description (Translated English): The national food safety standards of food additives Acesulfame potassium
Sector / Industry: National Standard
Classification of Chinese Standard: C54;X40
Classification of International Standard: 67.220.20
Word Count Estimation: 9,959
Date of Issue: 2010-12-21
Date of Implementation: 2011-02-21
Regulation (derived from): Ministry of Health Bulletin No. 19 of 2010
Issuing agency(ies): Ministry of Health of the People's Republic of China
Summary: This Chinese standard applies to acetyl reagents, fuming sulfuric acid or sulfur trioxide, potassium hydroxide or potassium carbonate as raw materials prepared food additive potassium acetate phthalate sulfonamides.

GB 25540-2010: The national food safety standards of food additives Acesulfame potassium

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
The national food safety standards of food additives Acesulfame potassium National Food Safety Standard Food additives acesulfame potassium Issued on. 2010-12-21 2011-02-21 implementation National Standards of People's Republic of China People's Republic of China Ministry of Health issued

Foreword

Appendix A of this standard is a normative appendix. National Food Safety Standard Food additives acesulfame potassium

1 Scope

This standard applies to acetylating agent, fuming sulfuric acid or sulfur trioxide, potassium hydroxide or potassium carbonate as raw materials obtained food additives Additives acesulfame potassium.

2 Normative references

The standard file referenced in the application of this standard is essential. For cited documents with dates, only the date of Version applies to this standard. For undated references, the latest edition (including any amendments) applies to this standard. 3 formula, relative molecular mass and structural formula Formula 3.1 C4H4KNO4S 3.2 formula 3.3 relative molecular mass 201.24 (according to 2007 international relative atomic mass) 4. Technical Requirements 4.1 Sensory requirements. comply with Table 1. Table 1 Sensory requirements Project requires test methods Color and texture colorless crystals or white crystalline powder proper amount of sample in a clean, dry white porcelain dish, self However, to light, to observe its color and texture, and smell its flavor. Odour odorless 4.2 Physical indicators. to comply with Table 2. Table 2. Physical and chemical indicators Item Index Test Method Acesulfame potassium (dry basis), w /% 99.0 ~ 101.0 Appendix A A.3 Loss on drying, w /% ≤ 1.0 GB 5009.3-2010 a direct drying pH 5.5 ~ 7.5 in Appendix A A.4 Fluorides (as F)/(mg/kg) ≤ 3 GB/T 5009.18-2003 fluoride ion selective electrode method Organic impurities/(mg/kg) ≤ 20 Appendix A A.5 Lead (Pb)/(mg/kg) ≤ 1 GB 5009.12 a drying temperature and time are 105 ℃ and 2 h.

Appendix A

(Normative) Testing method A.1 General Provisions Unless otherwise indicated in the analysis using only recognized as analytical reagents and GB/T 6682-2008 specified in the water. In the analysis Standard titration solution, impurities measured by standard solution, preparations and products, did not indicate when the other requirements, according to GB/T 601, GB/T 602, the provisions of preparation GB/T 603's. This solution was used in the test does not indicate what is formulated with solvent, it refers to an aqueous solution. A.2 Identification Test A.2.1 UV absorption Take 0.01g sample was dissolved in 1000 mL of water, and the solution has a maximum absorption at a wavelength of 227 nm at 2nm disabilities. A.2.2 color reaction Take 0.3g sample is added 1mL of glacial acetic acid and 5mL water, dissolved, and then dropping a few drops at a concentration of 100g/L solution of sodium cobalt nitroso (now Existing service), which generates a yellow precipitate. A.3 Determination of acesulfame potassium A.3.1 Reagents and materials a) glacial acetic acid. b) acetic anhydride. c) perchloric acid standard titration solution. c (HClO4) = 0.1mol/L. d) crystal violet indicator solution. 5g/L. e) of acetic anhydride. Take appropriate amount of glacial acetic acid, water content calculation, 1g of water plus 5.22g of acetic anhydride. A.3.2 Analysis step Weigh 0.2g ~ 0.3g dried (105 ℃, 2 h) after the sample to the nearest 0.000 2g, placed in 250mL Erlenmeyer flask with 50mL Of anhydrous acetic acid was dissolved (dissolution may be slow). Add 2 to 3 drops of crystal violet indicator solution, titration with perchloric acid standard solution titration to dissolve Blue-green liquid, and to maintain constant color 30s, is the titration end point. While doing the blank test. A.3.3 Calculation Results Acesulfame potassium content X1 according to formula (A.1) Calculated. () 1002012.0 1 ×× - × = m VVcX% (A.1) Where. Content X1-- acesulfame potassium,%; The actual concentration c-- perchloric acid standard titration solution, expressed in moles per liter (mol/L); V1-- sample consumption perchloric acid standard titration solution volume in milliliters (mL); V0-- blank sample consumption of perchloric acid standard titration solution volume in milliliters (mL); 0.2012--1 mmol acesulfame potassium (C4H4KNO4S) in grams; Quality m1-- sample (dry basis) in grams (g). The results parallel arithmetic mean of the measurement results shall prevail. Twice in the same condition absolutely independent determination results The difference is not more than 0.2% of the arithmetic mean. A.4 pH measurement Weighed amount of sample, formulated at a concentration of 10mg/mL solution with a pH meter. A.5 Determination of organic impurities A.5.1 Reagents and materials a) Ethylparaben. standard. b) acetonitrile. chromatography. c) tetrabutyl ammonium hydrogen sulfate (TBAHS) solution. 0.01mol/L. A.5.2 Instruments and Equipment a) high performance liquid chromatography; b) Detector. UV detector or diode array detector, detection wavelength of 227nm. A.5.3 reference chromatographic conditions a) Column. 25cm × 4.6mm (id) stainless steel column, or other equivalent column; filled with reversed phase C18 silica gel, particle size 3μm ~ 5μm, or other equivalent material properties. b) Mobile phase. acetonitrile .0.01mol/L tetrabutyl ammonium hydrogen sulfate (TBAHS) solution of 40.60 (volume ratio). c) Column temperature. 25 ℃. d) Flow rate. about 1mL/min. e) Injection volume. 20μL. NOTE. The chromatographic separation is not less than the system can be separated under the conditions acesulfame potassium and ethylparaben. A.5.4 Analysis step A.5.4.1 Preparation of sample solution A sample solution preparation water, a sample concentration of 10 g/L. A.5.4.2 diluted solution prepared The dilution of the sample, diluted solution of a concentration of 0.2mg/L. A.5.4.3 Determination Under the above chromatographic conditions, the sample was subjected to chromatography to obtain a chromatogram. If the triple acesulfame Potassium elution time there are other peaks in addition to the main peak of acesulfame K, then the analysis of the diluted solution was chromatographed to give first Two chromatograms. A.5.5 results found In times of acesulfame potassium elution time, the first chromatogram in addition to the main peak of other acesulfame potassium peak area And shall not exceed the second chromatogram peak area of acesulfame potassium. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 25540-2010_English be delivered?

Answer: Upon your order, we will start to translate GB 25540-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 25540-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB 25540-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.