GB 24848-2010 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 24848-2010: Minimum allowable values of energy efficiency and energy efficiency grades for heater of petroleum industry
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 24848-2010	149	Add to Cart	2 days	Minimum allowable values of energy efficiency and energy efficiency grades for heater of petroleum industry	Valid

Similar standards

GB 24850   GB/T 24915   GB 24500   GB/T 24851   

Basic data

Standard ID: GB 24848-2010 (GB24848-2010)
Description (Translated English): Minimum allowable values of energy efficiency and energy efficiency grades for heater of petroleum industry
Sector / Industry: National Standard
Classification of Chinese Standard: F01
Classification of International Standard: 27.010
Word Count Estimation: 5,521
Date of Issue: 2010-06-30
Date of Implementation: 2010-12-01
Quoted Standard: SY/T 0540; SY/T 6381
Regulation (derived from): Announcement of Newly Approved National Standards No. 2 of 2010 (total 157)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Chinese standard applies at an altitude of 3 500 m or less, onshore oil and gas fields and long- distance pipelines used in gas or liquid (oil) energy as fuel, the rated thermal load at 40 kW-12 000 kW within the petroleum industry furnace (hereinafter referred to as the furnace).

GB 24848-2010: Minimum allowable values of energy efficiency and energy efficiency grades for heater of petroleum industry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Minium allowable values of energy efficiency and energy efficiency grades for heater of petrolrum idustry ICS 27.010 F01 National Standards of People's Republic of China Industrial furnace oil Energy efficiency of limited value and energy efficiency rating Issued on. 2010-06-30 2010-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

4.3, 4.4 of this standard are mandatory, the rest are recommended. The standard proposed by China National Petroleum Corporation. This standard by the National Standardization Technical Committee for Energy and Management. This standard is drafted by. China National Petroleum Corporation Petroleum Engineering energy-saving technology research and development centers. Participated in the drafting of this standard. China National Petroleum Corporation Quality Management and Energy Ministry, China Petroleum & Chemical Corporation oil Field Development Division, China National Petroleum Exploration and Production Company Limited, Daqing Petroleum Institute, China Petroleum Pipeline Machinery Manufacturing has Limited liability company, China National Petroleum Corporation, Northwest Energy Conservation Monitoring Centre, the Daqing oil field equipment manufacturing group. Drafters of this standard. according to Wu Yun, Xue-Wen Wang, The Middle, ZHAO Gui Zi, Jin Xin, a Qinglin, SUN Yu, Zou Feng, Zhu Bin, Xuxiu Fen, It's coming now. Industrial furnace oil Energy efficiency of limited value and energy efficiency rating

1 Scope

This standard specifies the petroleum industry furnace energy efficiency rating, energy efficiency limit, the target energy efficiency limit values, evaluating values of energy conservation and test method. This standard applies to the following at an altitude of 3500m, onshore oil and gas fields and long-distance pipelines used in gas or liquid (oil) as fuel energy, Rated thermal load within the range of 40kW ~ 12000kW oil industry (hereinafter referred to as the furnace) by a heating furnace. This standard does not apply to solid energy as furnace fuel.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. SY/T 0540 Petroleum Industrial Furnace Types and basic parameters SY/T 6381 Determination of thermal furnace

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Furnace energy efficiency limit minimumalowablevaluesofenergyefficiencyforheater Under standard test conditions, allowing the furnace efficiency minimum. 3.2 Furnace target energy efficiency limit targetminimumalowablevaluesofenergyefficiencyforheater After the implementation of this standard certain number of years of formal implementation of the furnace energy efficiency limit values. 3.3 Furnace energy conservation evaluation values evaluatingvaluesofenergyconservationforheater Under standard test conditions, energy efficiency of the furnace should reach a minimum value. 4. Technical Requirements 4.1 Basic requirements General furnace performance, security, performance and design, manufacturing, quality and environmental requirements should conform to relevant standards. 4.2 furnace energy efficiency rating Press SY/T 0540 provisions furnace heat load rated series divided rated furnace heat load range, oven energy efficiency rating Divided into three, including an energy-efficient, the level not less than the furnace efficiency requirements in Table 1. Table 1 furnace energy efficiency rating Rated thermal load P/kW Furnace Efficiency /% Gas furnace oil furnace Level 1 2 3 1 2 3 P < 200 87 86 80 86 85 79 Table 1 (continued) Rated thermal load P/kW Furnace Efficiency /% Gas furnace oil furnace Level 1 2 3 1 2 3 200≤P < 500 87 87 82 87 86 81 500≤P < 1000 89 88 84 88 87 83 1000≤P≤1200 90 89 85 89 88 84 1200 \u003cP≤1500 90 89 86 89 88 85 1500 \u003cP\u003c2000 91 90 87 90 89 86 2000≤P < 2500 91 90 88 90 89 87 2500≤P≤12000 92 91 89 91 90 88 Note. P is the nominal furnace heat load. 4.3 furnace energy efficiency limit Furnace energy efficiency of limited value in Table 1 energy efficiency rating of three. 4.4 Furnace target energy efficiency limit After three years from the date of implementation of this standard, furnace energy efficiency limit value is not less than specified in Table 2. Table 2 furnace target energy efficiency limit Rated thermal load P/kW Furnace Efficiency /% Gas furnace oil furnace P < 200 83 82 200≤P < 500 85 84 500≤P < 1000 86 85 1000≤P≤1200 87 86 1200 \u003cP≤1500 88 87 1500 \u003cP\u003c2000 89 88 2000≤P < 2500 89 88 2500≤P≤12000 90 89 Note. P is the nominal furnace heat load. 4.5 furnace energy conservation evaluation values Furnace energy saving evaluation value table 1 energy efficiency rating of two.

5 Test Methods

Furnace efficiency shall SY/T 6381 method to determine. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 24848-2010_English be delivered?

Answer: Upon your order, we will start to translate GB 24848-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 24848-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB 24848-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.