GB 24752-2009 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 24752-2009: Methomyl technical
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 24752-2009	189	Add to Cart	3 days	Methomyl technical	Valid

Similar standards

GB/T 38211   GB/T 18418   GB/T 18419   GB/T 24750   GB/T 24749   GB 24751   

Basic data

Standard ID: GB 24752-2009 (GB24752-2009)
Description (Translated English): Methomyl technical
Sector / Industry: National Standard
Classification of Chinese Standard: G25
Classification of International Standard: 65.100.10
Word Count Estimation: 8,842
Date of Issue: 2009-11-30
Date of Implementation: 2010-07-01
Quoted Standard: GB/T 1600; GB/T 1601; GB/T 1604; GB/T 1605-2001; GB 3796; GB/T 19138
Adopted Standard: FAO 264/TC-2002, MOD
Regulation (derived from): Announcement of Newly Approved National Standards No. 14 of 2009 (No. 154 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Chinese standard specifies the Methomyl drug requirements, test methods and marking, labeling, packaging, storage and transportation. This standard applies to methomyl and its impurities generated in the production of Methomyl medicine.

GB 24752-2009: Methomyl technical

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methomyl technical ICS 65.100.10 G25 National Standards of People's Republic of China Methomyl original drug Published 2009-11-30 2010-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China issued

Foreword

This standard in Chapter 3, Section 5 is mandatory, the rest are recommended. This standard uses redrafted law revision adopted FAO specification 264/T C (2002) "methomyl original drug" (in English). This standard FAO Specification 264/T C (2002) The main technical differences are as follows. Standard control --- This acetone-insoluble matter, water and pH range, without the FAO specifications of the three indicators. The date of implementation of this standard, the former Chemical Industry Standard HG2611-1994 "Methomyl original drug" abolished. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Pesticide Standardization Technical Committee (SAC/TC133). This standard is drafted. Shenyang Chemical Research Institute. Participated in the drafting of this standard. Haili Guixi Chemical Pesticide Co., Ltd., Shandong Pesticide Research Institute, Jiangsu dragon Chemical Co., Ltd., Yancheng Limin Chemical Co., Ltd. The main drafters. Zhao Xin, Li Xiujie, Running an, Li Dongqin, Feng Xiuzhen, Wei Hongsheng. Methomyl original drug Other names, structure and basic physical and chemical parameters of the active ingredient of the product of methomyl as follows. ISO common name. methomyl CIPAC digital code. 264 Chemical name. S- methyl-N - [(methylcarbamoyl) oxy] thioacetate imidate Structure. CH CH NH CH Empirical formula. C5H10N2O2S Molecular weight. 162.20 (according to 2005 international relative atomic mass) Biological activity. insecticide Melting point. 78 ℃ ~ 79 ℃ Vapor pressure (25 ℃). 0.72mPa Solubility (g/L, 25 ℃). 58 water; methanol 1000; 730 acetone; Ethanol 420 Stability. an aqueous solution, decomposing slowly at room temperature in sunlight, exposure to air and accelerated decomposition of alkaline medium Range 1 This standard specifies the requirements methomyl Granville original drug, test methods and marking, labeling, packaging, storage and transportation. This standard applies to impurities derived from the production of methomyl and methomyl composition original drug.

2 Normative references

Terms of the following documents become provisions of this standard by reference in this standard. For dated reference documents, all later Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to agreements based on this standard Whether the latest versions of these documents. For undated references, the latest version applies to this standard. GB/T 1600 Pesticide Method Moisture Determination 1601 pH value pesticides GB/T GB/T 1604 pesticide regulations for acceptance GB/T 1605-2001 sampling commercial pesticides GB 3796 pesticide packaging General GB/T 19138 Determination of acetone insoluble pesticide 3.1 Appearance White to off-white crystalline powder. 3.2 Technical Specifications Methomyl original drug should also meet the requirements of Table 1. Table 1 Methomyl original drug control project indicators Item Index Methomyl content /% ≥ 98.0 Acetone insolubles a /% ≤ 0.2 Moisture /% ≤ 0.3 The pH range of 4.0 to 8.0 When a normal production, the acetone insoluble matter was detected at least once every three months. Test Method 4 4.1 Sampling Carried out in GB/T 1605-2001 of "original drug product sampling" approach. Determined by sampling a random number table method packages, the amount of the final sample Not less than 100g. 4.2 Identification Test The present liquid chromatography --- identification test can be carried out simultaneously with the determination of the mass fraction of methomyl. Chromatography under the same operating conditions, the test A solution sample peak retention time of the standard solution Methomyl retention time, the relative difference should be less than 1.5%. Infrared spectroscopy --- Methomyl sample and standard IR in the range of 4000cm-1 ~ 400cm-1 absorption spectrum should be no significant difference different. Methomyl standard infrared spectra of Figure 1. Figure 1 methomyl standard infrared spectrum 4.3 Determination of the mass fraction of methomyl 4.3.1 Method summary Sample was dissolved in methanol, methanol + water as the mobile phase, used as a filler SpherisorbC8 stainless steel column and UV detector (235nm), the sample methomyl reverse phase high performance liquid chromatography and determination. 4.3.2 Reagents and solutions Methanol. HPLC grade; Water. The new secondary steam distilled water; Methomyl Standard. Known methomyl content, ≥99.0%. 4.3.3 Instruments HPLC. a variable wavelength UV detector; Chromatographic data processor or chromatography workstation; Column.200mm × 4.6mm (. I.d) stainless steel column, SpherisorbC8,10μm filler contents (or with equivalent effect C8, C18 bonded phase); Filter. membrane pore size of about 0.45 m; Microsyringe. 50μL; Quantitative sampling tube. 5μL; Ultrasonic cleaning. 4.3.4 HPLC operating conditions Mobile phase. [Psi] (methanol. water) = 40.60, by membrane filtration, and degassing; Flow rate. 1.0mL/min; Column temperature. room temperature (temperature change should be less than 2 deg.] C); Detection wavelength. 235nm; Injection Volume. 5μL; Retention time. Methomyl about 4.1min. Are typical operating parameters of the above, according to the characteristics of different instruments, for a given operating parameters appropriately adjusted to obtain the best result. Typical methomyl original drug by HPLC is shown in Figure 2. 1 --- methomyl. FIG 2 FIG HPLC original drug methomyl 4.3.5 Determination Step 4.3.5.1 Preparation of standard solution Weigh 0.10 g methomyl standard (accurate to 0.0002g), a 50mL volumetric flask, diluted with methanol to the mark. accurate The solution was pipetted 10mL, 50mL volumetric flask, diluted with methanol to the mark. 4.3.5.2 Preparation of sample solution Methomyl containing weighed about 0.10g sample of the original drug (accurate to 0.0002g), a 50mL volumetric flask, dilute to the mark with methanol Degree, shake. The solution was accurately pipetted 10mL, 50mL volumetric flask, diluted with methanol to the mark. 4.3.5.3 Determination Under the above operating conditions, after the instrument is stable, the number of consecutive doses of the standard solution is injected until the two needles methomyl relative change in peak area adjacent After less than 1.5%, measured according to the standard solution, sample solution, the sample solution, the order of standard solution. 4.3.6 computing The two needle and the sample solution was measured before and after the two doses of the standard sample solution Methomyl peak area are averaged. Sample Methomyl A mass fraction (%), according to equation (1). 1 = A2 (1) Where. A1 --- the standard solution, the average methomyl peak area; A2 --- sample solution, the average peak area methomyl; --- methomyl Granville standard mass fraction, expressed as a%. 4.3.7 allows poor Results difference methomyl replicates should be less than twice the mass fraction of 1.2%, and the arithmetic mean value as a measurement result. 4.4 Determination of acetone insolubles According to GB/T 19138 carried out. 4.5 Determination of Moisture According to GB/T 1600 in the "Karl Fischer method". Carried out in GB/T 1601. 4.7 product testing and acceptance Shall comply with the provisions of GB/T 1604's. Limit values rounding processing using the value comparison method. 5 marking, labeling, packaging, storage and transportation 5.1 methomyl sign the original drug Viagra, labeling and packaging should comply with the provisions of GB 3796. 5.2 methomyl original drug application drum lined with plastic bags, woven bag or barrel, a barrel (bags) net weight does not exceed 50kg. Also root According to user requirements or other forms of ordering agreement package, subject to the provisions of GB 3796. 5.3 methomyl original drug package airiness, dry place. 5.4 storage and transportation to prevent moisture and sunlight, no food, seed, feed mix, avoid contact with skin, eyes, nose and mouth to prevent inhalation. 5.5 Security. instructions for use in or on a packaging container, in addition to the respective signs of toxicity, there should be about the toxicity as follows. Methomyl is highly toxic carbamate pesticides, toxic inhalation, eating can be deadly. The FDA should avoid direct contact with skin and eyes Touch, Do not breathe dust and spray. All operations should be carried out in the ventilation, and skin and eye protection to take appropriate measures in case of contact, Washed with water 15min, then washed with soap and skin, and receive medical treatment. Atropine is a specific antidote. 5.6 Acceptance period. Methomyl original drug acceptance period of one month. From the date of delivery, product quality inspection completed within a month, the indicators Shall meet the standards. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 24752-2009_English be delivered?

Answer: Upon your order, we will start to translate GB 24752-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 24752-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB 24752-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.