GB 21139-2007 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 21139-2007: Basic requirements for standard data of fundamental geographic information Status: Valid
Basic dataStandard ID: GB 21139-2007 (GB21139-2007)Description (Translated English): Basic requirements for standard data of fundamental geographic information Sector / Industry: National Standard Classification of Chinese Standard: A75 Classification of International Standard: 07.040 Word Count Estimation: 8,890 Date of Issue: 2007-08-30 Date of Implementation: 2008-03-01 Regulation (derived from): China Announcement of Newly Approved National Standards No. 11 of 2007 (total 111) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Chinese standard provides the basic data requirements the mathematical basis, data content, production processes and data identified four aspects of basic geographic information standards. Basic geographic information standards applicable to the production of data, identification and use. GB 21139-2007: Basic requirements for standard data of fundamental geographic information---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Basic requirements for standard data of fundamental geographic information ICS 07.040 A75 National Standards of People's Republic of China Basic geographic information data standard basic provisions Posted 2007-08-30 2008-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 mathematical foundations of claim 1 5 requires the data content of 2 Claim 6 of the production process 3 7 data identified in claim 3ForewordAll the technical contents of this standard is mandatory. This standard is proposed and managed by the State Bureau of Surveying and Mapping. This standard was drafted. the standardization of China Institute of Surveying and Mapping Institute, National Mapping Bureau, Beijing Municipal Design and Research Institute of Surveying and Mapping, State Home Basic Geographic Information Center, Research and Design Institute to build a comprehensive survey, National Mapping Product Quality Supervision and Testing Center, China Land Surveying Planning Institute, Zhejiang Bureau of Surveying and Mapping and the Nanjing Institute of Surveying and Mapping Survey. The main drafters of this standard. Li fame, Xiao year, India Jie, Chen Cho, Li Li, Wang Dan, Wei Zeng Yan, Xu Jianxin, Chenshao Qin SURVEYING AND Chu Wei Zheng. This standard is the first release.IntroductionIn order to implement the provisions of the laws and regulations to protect the geographical information platform and related information system reliability and normative promote information Sharing and integration, safeguarding the interests of basic geographic information data producers and users of the standard is formulated. Basic geographic information data standard basic provisions1 ScopeThis standard mathematical basis, data content, production process and data identified four aspects of the provisions of the standard basic basic geographic information data Claim. This standard applies to the production of basic geographic information data standards, identification and use.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 13016-1991 standard system preparation principles and requirements GB/T 13989 national basic scale topographic maps and numbering GB/T 20257.1 national basic scale map Schema Part 1. 1.500 1.1000 1.2000 Topographical Map GB/T 13923 land information classification and code3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 As a unified framework for spatial orientation and spatial analysis of GIS data, which reflect and describe the Earth's surface measurement control Point system, water, and residential facilities, transportation, pipeline, state and administrative region, topography, vegetation and soil, cadastral, place names and other related to the natural and social And other factors of location, shape and attribute information. 3.2 Within a certain range as a basis for other standards and widespread use, it has broad significance criteria. [GB/T 13016-1991,1.7] 3.3 To ensure the applicability of the product, the product must meet some or all of the requirements established by the standard. Its scope includes. different specifications, Technical performance, test methods, inspection rules, packaging, storage, and transportation. [GB/T 13016-1991,1.9]4 mathematical basis of the requirements4.1 plane coordinate system should be used to coordinate a unified state; independent coordinate system when strictly necessary, can be legally approved. 4.2 elevation that should be used or the 1985 National Height Datum 1956 elevation-based Yellow Sea; really necessary, can be built with the National Height Datum Establishment of an independent elevation line contact. Depth reference should theoretical lowest ebb face. 4.3 scale series should be. 1.500,1.1000,1.2000,1.5000,1.10000,1.25000,1.50000, 1.100000,1.250000,1.500000,1.1000000. 4.4 map projection should be. 1000000 uses an isometric projection Conformal Conic; 1.25000 ~ 1.500000 Gauss - g Lvge projection by 6 ° zoning; 1.500 ~ 1.10 000 Gauss - Kruger projection when, by 3 ° zoning, indeed necessary, by 1.5 ° zoning. 4.5 In terms of map sheet as a unit, 1.500 ~ 1.2000 subdivision and numbered GB/T 20257.1 execution; 5000 ~ 1000000 Framing and numbered GB/T 13989 execution.5 requires the data content5.1 Overview Basic geographic information data must be in a standard 5.2 to 5.13 of a combination of one or more, and should adopt national standards or mapping industry Standards established metadata. 5.2 measurement and control point data Measurement and control point data should include flat-control point, the control point elevation, astronomical point of gravity point, satellite positioning and other control point measurement control Position of the point, and the point of the property in mind. Wherein the horizontal control points include the origin of the earth, one, two, three, four, etc. triangulation point, one, two, three, four, etc. traverse points; height control points include water Quasi origin, one, two, three, four leveling points; astronomical astronomy main points include points, one, two, three, four and so on astronomical points; gravity points include a reference point, the basic Point, first, second gravity point, encrypted point; GPS control points include AA level (continuous operation station), A, B, C, D, E grade point; other measurements Control points include city level survey control points, such as control points. 5.3 River Data River data shall include rivers, canals, lakes, reservoirs, marine elements, location and other attributes water system and water elements and ancillary facilities. 5.4 residential facilities and data Residential and facilities data should include residential, and industrial facilities, agriculture and its facilities, public services and facilities, historical sites, were Teaching position and property facilities, scientific observation stations and other buildings and facilities. 5.5 Traffic data Traffic data should include rail, intercity highways, urban roads, rural roads, road structures and ancillary facilities, water facilities, waterways, air Location and transportation facilities and other properties of transport facilities. 5.6 Data Pipeline Line data should include transmission lines, communication lines, oil (gas and water) transport position and attribute the main conduit and the city line. Wherein 1.2000 In small-scale urban pipeline can contain data, 1.100000 small scale power lines can not contain data. 5.7 State and administrative region data State and district data should include political borders, pending border and domestic levels of administrative division boundaries (provincial-level administrative region, prefecture-level administrative region, county line Administrative Region and township administrative) and other regional boundaries (village community, community special area and nature reserve boundaries, etc.) the location and attributes. 5.8 topography data The data should include topography contours, spot heights annotation, digital elevation models, contours waters, water bet record points to the natural landscape and artificial The location and appearance properties. 5.9 Vegetation and soil data Vegetation data should include the location and properties of natural and artificial vegetation. Soil data should include sand, desert, saline, bare land, desert Tundra and the location and attributes. 5.10 Names Data Geographical names data should include the name of the natural and human geographical entity, location, and attributes. 5.11 digital orthophoto data Digital orthophoto data is the result of radiometric and geometric correction, and image processing to correct projection difference; full color image can be Or color, and it can also be multi-spectral, sometimes attached to the main residential areas, places, and state and other vector data. 5.12 Cadastral Survey data Cadastral Survey data should include cadastral (sub) district boundary line, boundary points and other important landmarks as well as the location of the facility is located contains land Property owners and land users or class information and the like. 1.2000 small scale may be free of cadastral survey data. 5.13 Other data Important GIS data and mapping administration department of the State according to the law published in accordance with the law of other organizations Surveying Geomatics data. Production process of claim 6, 6.1 should be based on the full design document, format specifications, and approval of the project approved by the competent authorities. The project design document should include the source, destination, Work content, data collection and analysis of use, route and process technology, the standard adopted by submission of the results and the main technical indicators, quality Safeguards and organize the implementation of programs. 6.2 The use of information and data sources should meet the design requirements of the book, there are national standards, industry standards or local standards should be consistent with the corresponding standard. 6.3 technical methods used in the production process should meet the design document. Among them, the basic standards and product standards used should comply Relevant national standards. Clearly required method of operation should follow the relevant regulations. 6.4 Quality Control procedure should be strictly enforced check, final inspection and acceptance system, design and other quality control requirements specified in the letter. 6.5 QA completed by the production unit, and acceptance by the competent department of project implementation organization or commission related units. 6.6 equipment used in verification or calibration should be carried out in accordance with relevant state regulations.7 data requirements identified7.1 standard basic geographic information data must be identified in accordance with the requirements of 7.2 to 7.5. 7.2 data found to be recognized by the unit should provide data production unit corresponding mapping qualification documents, data design document production, data Documents signed by a registered surveyor and approved in accordance with the requirements of 6.5 of acceptance of the complete document. 7.3 origin of the earth, one or two horizontal control point data, leveling origin, one or two standard point data astronomical point data, gravity data points, Grade AA, A and B grade GPS control point data, 1.25000,1.50000,1.100000,1.250000,1.500000 1000000 basic geographic information and data (excluding survey control point data), it is important GIS data and mapping administration under the State Council Surveying department shall organize additional basic geographic information data by surveying and mapping administrative department commissioned the agency finds that the law or the law Procedural rules prescribed for approval. Other Level measurement and control point data 7.4 Article 7.3 of the outside foundation 1.500,1.1000,1.2000,1.5000,1.10000 GIS data (excluding survey control point data), the data show provincial land surveying and mapping administrative departments of the institutions entrusted identified. Process and method 7.5 is deemed to be executed in accordance with relevant national standards. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 21139-2007_English be delivered?Answer: Upon your order, we will start to translate GB 21139-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 21139-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB 21139-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
