GB 19645-2010 English PDFUS$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 19645-2010: National food safety standard -- Pasteurized milk Status: Valid GB 19645: Historical versions
Basic dataStandard ID: GB 19645-2010 (GB19645-2010)Description (Translated English): National food safety standard -- Pasteurized milk Sector / Industry: National Standard Classification of Chinese Standard: C53;X16 Classification of International Standard: C53; X16 Word Count Estimation: 7,781 Date of Issue: 2010-03-26 Date of Implementation: 2010-12-01 Older Standard (superseded by this standard): GB 19645-2005; GB 5408.1-1999 ial Regulation (derived from): Circular of the Ministry of Health (2010)7 Issuing agency(ies): Ministry of Health of the People's Republic of China Summary: This Chinese standard applies to whole milk, skimmed and partly skimmed pasteurized milk. GB 19645-2010: National food safety standard -- Pasteurized milk---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.National food safety standard.Pasteurized milk National Standards of People's Republic of China GB 25543-2010 People's Republic of China Ministry of Health issued Issued on. 2010-12-21 2011-02-21 implementation National Food Safety Standard Food additives L- alanine GB 25543-2010 ForewordAppendix A of this standard is a normative appendix. GB 25543-2010 National Food Safety Standard Food additives L- alanine1 ScopeThis standard applies to L- aspartic acid as raw material, obtained by enzymatic production of food additives L- alanine.2 Normative referencesThe standard file referenced in the application of this standard is essential. For cited documents with dates, only the date of Version applies to this standard. For undated references, the latest edition (including any amendments) applies to this standard. 3 formula, relative molecular mass and structural formula Formula 3.1 C3H7NO2 3.2 formula 3.3 relative molecular mass 89.09 (according to 2007 international relative atomic mass) 4. Technical Requirements 4.1 Sensory requirements. comply with Table 1. Table 1 Sensory requirements Project requires test methods Color White take appropriate laboratory sample, placed in a clean, dry white porcelain dish, in Natural light, visual observation, smelling the odor. Organization state crystal or crystalline powder 4.2 Physical indicators. to comply with Table 2. GB 25543-2010 Table 2. Physical and chemical indicators Item Index Test Method L- alanine (dry basis), w /% 98.5 ~ 101.5 Appendix A A.4 Loss on drying, w /% ≤ 0.20 Appendix A A.5 pH (50g/L solution) 5.7 ~ 6.7 in Appendix A A.6 Arsenic (As)/(mg/kg) ≤ 1 Appendix A A.7 Heavy metals (Pb)/(mg/kg) ≤ 10 Appendix A A.8 Residue on ignition, w /% ≤ 0.20 A.9 in Appendix A Specific rotation αm (20 ℃, D)/[(º) · dm2 · kg-1] 13.5 ~ 15.5 Appendix A A.10 GB 25543-2010Appendix A(Normative) Testing method A.1 Warning Some test procedures prescribed test method can lead to dangerous situations. The operator shall take appropriate safety and health practices. A.2 General Provisions Unless otherwise indicated in the analysis using only confirm three analytical grade reagents and water GB/T 6682-2008 stipulated. Test Methods standard titration solution, when measured impurity standard solution, preparations and products, with no other requirements noted, According to GB/T 601, the provisions of GB/T 602 and GB/T 603 of the preparation. A.3 Identification Test A.3.1 Reagents and materials A.3.1.1 potassium permanganate. A.3.1.2 indane trione solution. 20g/L. Weigh 20.0g indane trione, soluble in water, dilute to 1000mL. A.3.1.3 sulfuric acid solution. 130. A.3.2 Analysis step A.3.2.1 indane trione test Weigh about 1g laboratory samples, accurate to 0.1g, dissolved in 1000mL of water of this solution 5mL, adding 1mL indane trione dissolved Was heated to boiling, after about 3min was purple. A.3.2.2 oxidation test Weigh about 0.2g laboratory samples were dissolved in 10mL sulfuric acid solution was added 0.1g of potassium permanganate, boiled, stimulate a strong odor Acetaldehyde. Determination A.4 L- phenylalanine content A.4.1 Method summary Sample formic acid as a co-solvent, glacial acetic acid as solvent, crystal violet as indicator, titration with perchloric acid standard solution titration, according to Consumption volume perchloric acid standard titration solution content is calculated L- alanine. A.4.2 Reagents and materials A.4.2.1 glacial acetic acid. A.4.2.2 anhydrous formic acid. A.4.2.3 perchloric acid standard titration solution. c (HClO4) = 0.1 mol/L. A.4.2.4 crystal violet indicator solution. 2g/L. A.4.3 Analysis step A.4.3.1 Weigh about 0.2g A.5 of dried A, accurate to 0.0001g, placed in 250mL dry conical flask, add 3mL no Aqueous formic acid dissolved, add 50mL glacial acetic acid, add 2 drops of crystal violet indicator solution, titration with perchloric acid standard solution titration until the solution changed from blue A blue-green endpoint. GB 25543-2010 A.4.3.2 measured at the same time, according to the same procedure and the determination of the sample without using the same amount of reagent blank test solution Experience. A.4.4 Calculation Results L- alanine (C3H7NO2) mass fraction w1, expressed in%, according to formula (A.1) Calculated. )( twenty one 1 ×× - = cMVVw% (A.1) Where. V1-- sample consumption of perchloric acid standard titration solution (A.4.2.3) the value of the volume, in milliliters (mL); V2-- blank consumption perchloric acid standard titration solution (A.4.2.3) the value of the volume, in milliliters (mL); Accurate c-- perchloric acid standard titration solution concentration value in units of moles per liter (mol/L); m-- sample mass value in grams (g); M - L- alanine numerical molar mass in grams per mole (g/mol) (M = 89.09). The arithmetic average of the results of two parallel determination for reporting results. Two parallel determination results is not more than 0.3% absolute difference. A.5 Determination of loss on drying According to GB/T 6284 carried out. Measured, weighed 1g ~ 2g laboratory samples, accurate to 0.0001g. Take two parallel determination results The arithmetic average of the measurement results, the results of two parallel determination of the absolute difference is not more than 0.03%. The remaining portion was dried (this is the dry Dry matter A) used in the determination of L- alanine. A.6 pH measurement of According to GB/T 9724 carried out. Measured, weighed about 5g laboratory samples, accurate to 0.01g, add about 20mL of water-soluble carbon dioxide-free Solution and diluted to 100mL after measurement. A.7 Determination of Arsenic According to GB/T 5009.76 Gutzeit method. It said measured taking about 1g laboratory samples, accurate to 0.01g. Limited standard solution preparation. Pipette Pipette 1.00mL limit arsenic standard solution (arsenic 0.001mg), and treated in the same sample at the same time. A.8 Determination of Heavy Metals A.8.1 Reagents and materials A.8.1.1 thioacetamide solution. Weigh thioacetamide about 4g, accurate to 0.1g, dissolved in 100mL of water, placed in the refrigerator warranty Deposit. Immediately prior to taking this solution 1.0mL was added in advance by the sodium hydroxide solution (40g/L) 15mL, 5mL water and glycerol mixture consisting of 20mL Combined solution 5mL, placed 20s, immediately cooled using a water bath heated. A.8.1.2 carbon dioxide-free water. A.8.1.3 ammonium acetate buffer, pH = 3.5. Weigh 25.0g of ammonium acetate, 25mL dissolved in water, add 45mL 6mol/L hydrochloric acid, Adjusted with dilute hydrochloric acid or dilute aqueous ammonia pH = 3.5 was diluted with water to 100mL. A.8.1.4 Lead (Pb) standard solution. 1μg/mL. This solution was prepared just before use. A.8.2 Analysis step Weigh about 10 g laboratory samples, accurate to 0.01g, with about 60mL no carbon dioxide dissolved in water and diluted to 100mL, is like GB 25543-2010 Solution. Draw the sample solution 12mL, 25mL stoppered placed colorimetric tube, the tube is A. Absorb lead standard solution 10mL and 2mL The sample was placed in 25mL colorimetric tube with a stopper, shake, is the B tube (standard). Absorb carbon dioxide-free water and 10mL 2mL sample Solution set 25mL colorimetric tube with a stopper, shake, is the C tube (blank). In A, B, C the tube, each 2mL was added ammonium acetate buffer Red solution, shake, respectively dropping 1.2mL acetyl ammonium thiosulfate solution, rapid mixing. With respect to the tube C, B show a light brown pipe. 2min, the color should not be deeper than the pipe A B tube. A.9 Determination of residue on ignition A.9.1 Reagents and materials A.9.1.1 sulfuric acid. A.9.1.2 sulfuric acid solution. 18. A.9.2 Analysis step Weigh about 2g ~ 3g laboratory samples, accurate to 0.0001g, set to a constant burning quality porcelain crucible at 800 ℃ ± 25 ℃, Adding an appropriate amount of sulfuric acid solution sample is completely wet. With warm heat, until the sample is completely carbonized, cooled. Plus about 0.5mL of sulfuric acid residues soaked Slag, using the above method is heated to sulfuric acid vapor Yat do. Burning at 800 ℃ ± 25 ℃ 45min. Cool to room temperature in a desiccator, and weigh. A.9.3 Calculation Results Burning residue mass fraction w2, expressed in%, according to formula (A.2) Calculated. 10012 × = m mw% (A.2) Where. m-- sample mass value in grams (g); m1-- residue mass value in grams (g). The arithmetic average of the results of two parallel determination for reporting results. Two parallel determination results of absolute difference is not more than 0.02%. A.10 Determination of specific rotation A.10.1 Weigh 10g laboratory samples, accurate to 0.0001g, plus hydrochloric acid solution (11) was dissolved and transferred to 100mL volumetric flask and With dilute hydrochloric acid solution (11) and shake. (20, D) ℃ Specific rotation αm numerical order (°) · dm2 · kg-1 according to formula (A.3) Calculated. αm (20 ℃, D) l α ρ = (A.3) Where. α - measured angle of rotation, in degrees (°); l - the length of the optical tube unit decimeter (dm); ρα - mass concentration in the solution effective component in grams per milliliter (g/mL). A.10.2 Other press GB/T 613 performed. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 19645-2010_English be delivered?Answer: Upon your order, we will start to translate GB 19645-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 19645-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB 19645-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 19645-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 19645-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
