GB 17655-2008 English PDF

US$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 17655-2008: Regional emblem of Macao Special Administrative Region
Status: Valid

GB 17655: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 17655-2008	419	Add to Cart	3 days	Regional emblem of Macao Special Administrative Region	Valid
GB 17655-1999	959	Add to Cart	6 days	Regional emblem of Macao Special Administrative Region	Obsolete

Similar standards

GB/T 16903   GB/T 15565   GB/T 15566.1   GB/T 30237   GB/T 30785   GB 15093   

Basic data

Standard ID: GB 17655-2008 (GB17655-2008)
Description (Translated English): Regional emblem of Macao Special Administrative Region
Sector / Industry: National Standard
Classification of Chinese Standard: A22
Classification of International Standard: 01.080.10
Word Count Estimation: 18,127
Date of Issue: 2008-06-19
Date of Implementation: 2009-06-01
Older Standard (superseded by this standard): GB 17655-1999
Regulation (derived from): Announcement of Newly Approved National Standards No. 10 of 2008 (total 123)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Chinese standard relates to suspension of the Macao Special Administrative Region of the Emblem (hereinafter referred to as the regional emblem) of the technical requirements, test methods, inspection rules, marking and packaging. This standard applies to fiber reinforced plastic or aluminum alloy produced by regional emblem. In print production process of other materials such as flat-screen regional emblem should also refer to the relevant requirements of this standard execution.

GB 17655-2008: Regional emblem of Macao Special Administrative Region

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Regional emblem of Macao Special Administrative Region ICS 01.080.10 A22 National Standards of People's Republic of China Replacing GB 17655-1999 Emblem of Macau Posted 2008-06-19 2009-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

All technical contents of this standard is mandatory. This standard is GB 17655-1999 "Emblem of Macau" amendments. This standard compared with GB 17655-1999 main changes are as follows. --- Original standard Annex A, Annex B be amended to "normative references"; --- Yellow color of the emblem and the color difference values were revised. Appendix A of this standard is a normative appendix. This standard was proposed by the Hong Kong and Macau Affairs Office. This standard color by the National Standardization Technical Committee. This standard is drafted by. Institute of Psychology, Shenzhen Ocean Power Technology Co., Ltd. The main drafters of this standard. Han new cloth, such as Sun Xiu, yellow side, He Weiping, Huang Yongheng. This standard replaces the standards previously issued as follows. --- GB 17655-1999. Emblem of Macau

1 Scope

This standard specifies the People's Republic of China Emblem of Macau (hereinafter referred to as the regional emblem) technical requirements for the suspension of the test Methods, inspection rules, signs and packaging. This standard applies to fiber-reinforced plastic or aluminum alloy produced regional emblem. Other materials such as printing craftwork plane Regional Emblem Figure The text should also refer to the relevant requirements of this standard implemented.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. Plastic bending performance test method GB/T 1449 fiber reinforced GB/T 1720 film adhesion assay GB/T 1733 Determination of water resistance of the film (GB/T 1733-1993, neqГOCT9.403. 1980) GB/T 1740 Determination of resistance to wet heat GB/T 1766 Paints and varnish coating aging rating method GB/T 1771 Paints and varnishes - Determination of resistance to neutral salt spray (GB/T 1771-2007, ISO 7253.1996, IDT) Plastic Barcol hardness test GB/T 3854 enhancements Methods of measurement GB/T 3979 object colors Evaluation of two o'clock GB/T 4380-2004 roundness error, three-point method GB/T 6739 Determination of paints and varnishes film hardness pencil method (GB/T 6739-2006, ISO 15184.1998, IDT) GB/T 9274 Paints and varnishes - determination of resistance to liquids (GB/T 9274-1998, eqv ISO 2812. 1974) GB/T 9754 Paints and varnishes contain metallic paint films of 20 °, 60 ° and 85 ° specular gloss measurement (GB/T 9754-2007, ISO 2813.1994, IDT) GB/T 11186.2-1989 coating color measurement method Part II. Color Measurement (GB/T 11186.2-1989, eqv ISO 7724-2. 1984) GB/T 11186.3-1989 coating color measurement method Part 3. Calculation of color differences (GB/T 11186.3-1989, eqv ISO 7724-3. 1984) GB/T 11337-2004 flatness error detection GB 15093 Emblem People's Republic of China Macao Special Administrative Region Basic Law People's Republic of China Flag of Macau, emblem use Interim Measures

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Characterization of People's Republic of China established the Macau Special Administrative Region, the middle is five stars, lotus flower, bridge and sea water around the words "Chinese people People's Republic of Macao Special Administrative Region "and the Portuguese" MACAU "(Macau) emblem. 3.2 Surface area emblem lotus flower, bridge and sea water used for specific reflectance white. 4. Technical Requirements 4.1 emblem shapes and patterns 4.1.1 emblem shapes and patterns should be consistent with the relevant provisions of "People's Republic of China Macao Special Administrative Region Basic Law" in. 4.1.2 The emblem shown in Figure 1. 1 People's Republic of China Emblem of Macau pattern 4.2 standard dimensions and tolerances emblem 4.2.1 Standard emblem various dimensions should follow the "People's Republic of China Flag of Macau, emblem use Interim Measures," the relevant Provisions. 4.2.2 Standard emblem various dimensions and tolerances are shown in Table 1, Figure 2 and Figure 3. 4.2.3 Standard emblem production and data analysis diagram in Appendix A. 4.2.4 need to produce non-standard size emblem, emblem should be standard size and tolerance is proportional to zoom in or out. Table 1 Standard emblem various dimensions and tolerances in millimeters project Figure 2 Code Standard dimensions and tolerances No. 1 on the 23rd Emblem face Diameter  1000 ± 6 800 ± 5 600 ± 4 Body thickness T 50 ± 4 40 ± 3 30 ± 2 Outer angle 5 ° ~ 8 ° 5 ° ~ 8 ° 5 ° ~ 8 ° Roughness E 6 5 4 Roundness 654 Table 1 (continued) millimeters project Figure 2 Code Standard dimensions and tolerances No. 1 on the 23rd Narrow green ring Width B 20 ± 2 16 ± 2 12 ± 1 Medial thickness T1 10 ± 1 8 ± 1 6 ± 1 Chinese Character height H3 70 ± 3 56 ± 2 42 ± 2 Word axis angle α1 360 °/22 Portuguese Letter high H4 63 ± 2 50 ± 2 38 ± 2 The angle between the axis letter α2 12 ° 30 ' The Portuguese text thickness T1 10 ± 1 8 ± 1 6 ± 1 Green inner circle Diameter 1 740 ± 3 592 ± 2 444 ± 2 The thickness T1 10 ± 1 8 ± 1 6 ± 1 Big star Circumscribed circle diameter 2 130 ± 5 104 ± 4 78 ± 3 Central thickness T2 15 ± 2 12 ± 1 9 ± 1 Tip top corner from the inner circle of top H 25 ± 2 20 ± 1 15 ± 1 Small five-pointed star Circumscribed circle diameter 3 90 ± 4 72 ± 3 54 ± 1 Central thickness T1 10 ± 1 8 ± 1 6 ± 1 lotus Total width B1 600 ± 4 480 ± 3 360 ± 2 Center Lotus Culet From the sea bottom H2 247 ± 4 198 ± 3 148 ± 2 The thickness T1 10 ± 1 8 ± 1 6 ± 1 Lotus top center to the bottom tip height H1 313 ± 5 250 ± 4 188 ± 3 Lotus Culet bridge leading to white distance H14 22 + 2 18 + 2 13 + 1 White Bridge height H13 28-1 22-1 17-1 seawater (Green part) A height H5 20-2 16-2 12 ± 1 Height two H7 20-2 16-2 12-1 Height three H9 15-2 12-1 9-1 Height four H11 10-1 8-1 6-1 The thickness T1 10 ± 1 8 ± 1 6 ± 1 seawater (White part) A height H6 10 + 1 8 + 1 6 + 1 Height two H8 15 + 2 12 + 1 9 + 1 Height three H10 20 + 2 16 + 2 12 + 1 Height four H12 25 + 2 20 + 2 15 + 1 Logo bottom surface irregularities E2 5 4 3 Logo on the back of mounting holes M 12 × 1.5 10 × 1.5 8 × 1.25 R is determined by the manufacturer and user consultation Figure 2 standard emblem various dimensions Note. The logo on the back area of the radius of the installation hole diameter and installation pitch logo center back is determined after consultation producers and users. Figure 3 a schematic view of the mounting holes on the back of emblem 4.3 of the regional emblem color and tolerance 4.3.1 emblem face the yellow star. fiber reinforced plastic, aluminum material production emblem yellow star and tolerance to GB 15093 The yellow star and tolerance prevail, the Y10 = 56.0 ± 2.0, x0 10 = 0.39 ± 0.01, y 10 = 0.40 ± 0.01. 4.3.2 emblem face Green. fiber reinforced plastic, the regional emblem green chroma value aluminum alloy production and tolerance to Y10 = 9.7 ± 1.0, x0 10 = 0.26 ± 0.01, y 10 = 0.39 ± 0.01. 4.3.3 emblem face of lotus flower, bridge, water, white text area of the bottom surface of the stimulus value Y10 of not less than 80. 4.3.4 Other materials yellow star emblem, emblem face green, lotus flower, bridge and sea water, the bottom surface of the text area on white chromaticity values and tolerance should Consistent with the requirements of this standard 4.3.1,4.3.2,4.3.3. 4.4 chrominance data calculation Emblem chrominance data plane to CIE standard illuminant D65 and CIE1964 standard colorimetric system calculations. 4.5 regional emblem film performance Emblem surface film properties are shown in Table 2. 4.6 of the regional emblem body material strength 4.6.1 bending strength of not less than 140MPa. 4.6.2 Surface hardness (Pap) not less than 30. 4.6.3 Falling ball impact strength. the regional emblem body no cracks, no damage. 4.7 Evaluation of the appearance of the regional emblem Emblem surface appearance of assessment requirements in Table 3. Table 2 logo surface film performance requirements Item Index Film color and appearance of the color line with the standard requirements of 4.3, the film smooth and bright Gloss (60 °) /% > 90 Adhesion/grade > 2 Hardness (Pap) > 2 Weather/level < 1 Water resistance (24h) does not blister, do not fall off Moist heat resistance (7d)/Level 1 Salt spray resistance (7d)/Level 1 Table 3 logo surface appearance assessment requirements Project Requirements Emblem surface appearance Surface pattern is clear, there should be no shrinkage, thermal cracking, cold cracking, deformation, exclusion edge, edge damage, there should be no significant effect on the appearance of sand, impurities, Stoma Surface color logo should not have obvious stains, take color, color stains, etc. Emblem surface area 4.8 Portugal green text font 4.8.1 emblem surface area "Macao Special Administrative Region of People's Republic of China" in green font should be consistent with standard typeface emblem shown in Figure 4. Portuguese region emblem face 4.8.2 "MACAU" (Macau) 4 green font should be consistent with standard typeface emblem region depicted in FIG.

4 words in Portuguese region emblem face Standard

5 Test methods

5.1 standard emblem various dimensions and measurement tolerance shall use qualified inspection, the accuracy of not less than 0.5% of the measuring tool. 5.2 color measurement should be GB/T 3979, GB/T 11186.2-1989 and GB/T 11186.3-1989 the provisions. 5.3 emblem face paint performance measurement should be GB/T 1720, GB/T 1733, GB/T 1740, GB/T 1766, GB/T 1771, GB/T 6739, the provisions of GB/T 9274 and GB/T 9754 were measured. 5.4 Strength Test 5.4.1 Bending strength test should be GB/T 1449 will be. 5.4.2 hardness measurement should be GB/T 3854 will be. 5.4.3 Falling Ball Impact. The positive sample emblem upward, horizontal spread on the concrete floor, away from the sample is placed at a weight above 1m 112g ball, make the ball free fall in the same plane surface portion emblem. Repeat three times to observe the sample surface cracks, deformation, delamination. 5.5 logo emblem face and bottom surface roughness test area shall be in GB/T 11337-2004 4.4b method performed. 5.6 logo body roundness test shall GB/T 4380-2004 2.3 in two-point measurement method. 5.7 logo surface appearance quality test. should in bright natural light from the logo face 1m, visual assessment; when the light intensity of not less than the assessed need to adopt 750lx daylight color fluorescent lamps.

6 Inspection rules

6.1 Inspection classification 6.1.1 factory inspection Each side emblem products factory inspection should be carried out at the factory. Factory inspection includes the shape of the emblem, logo design and various dimensions and surface Appearance, color quality assessment. Factory inspection, all test items all Eligible judged as qualified, otherwise unqualified. Substandard goods may not be manufactured. 6.1.2 Type inspection When the material emblem finish formula, production technology logo body changes, the type of inspection should be carried out. All quality requirements specified in Chapter 4 of the full When the Department of qualified judges for the inspection type that allows full production. 7 signs, packaging 7.1 marks Logo on the back of each side area should be marked with the company name and address, product serial number and date of manufacture. 7.2 Packaging 7.2.1 emblem on each side for an individually packaged. Packaging should ensure the quality emblem area from damage, easy to transport and storage. The outer packaging should be indicated yield Product name, size, material, package size, weight, name and address of the manufacturer, trademark and implementation of national standard number, shipping marks. outer When you install the package shall be accompanied by the necessary accessories, installation and storage instructions and inspection certificate. Shall be marked on the inspection certificate emblem specifications, materials Quality, product number, date of manufacture, manufacturer name and address, trademark, inspector name (or code). 7.2.2 Bulk packaging emblem emblem should ensure the quality of area from damage, easy to transport. Shall be marked on the outer packaging the product name, size, material Quality, quantity, package size, weight, name and address of the manufacturer, shipping marks.

Appendix A

(Normative) Macao Special Administrative Region of People's Republic of China Emblem making and standard data analysis diagram A. 1 in order to establish the origin of the coordinate point O Cartesian coordinate system. In O point as the center for three auxiliary circle, its diameter respectively , 1, 2, its The  to produce the desired outer diameter of the regional emblem. Green inner circle pattern on both sides of the longitudinal axis of coordinates corresponding to a diameter of 2 drawing (FIG A.1, Table A. 1). Figure A. 1 Table A. 1 millimeters Project Figure A. 1 code specification No. 1 on the 23rd Emblem surface diameter  1000 800 600 White circular outer diameter 1 960 768 576 Green inner circle diameter 2 740 592 444 A. 2 In O1, O2, O3 as the center for three auxiliary circle diameter are 3 and O4 with a diameter of a circle as auxiliary circle 4, even Then arcs constitution set lotus petals (Figure A.2, Table A.2). A. 3 to O5, O6, O7 as the center for three of a diameter of auxiliary circle 5, and O8, O9, O10 as the center for the three diameters are 6 Auxiliary circle, then O11 as the center as a diameter of a circle 7 the auxiliary connecting arcs constituting the left lotus petals (Figure A.3), then to the vertical axis represents Axis of symmetry, to the right of the lotus petal pattern (Figure A.3, table A.3). Figure A. 2 Table A. 2 millimeters Project Figure A. 2 code specification No. 1 on the 23rd Abscissa ordinate abscissa ordinate abscissa ordinate Center petals auxiliary circle center a position O1 +130 +37 +104 +30 +78 +22 Center petals auxiliary circle center the second position O2 +122 +49 +98 +39 +73 +29 Center petals auxiliary circle center three-position O3 +98 +68 +78 +54 +59 +41 Center petals auxiliary round one, two, three diameter 3 400 320 240 Center Auxiliary round petals hearts four position O4 0 +190 0 +152 0 +114 Center petals auxiliary circle four diameters 4 160 128 96 Figure A. 3 Table A. 3 millimeters Project Figure A. 3 code specification No. 1 on the 23rd Abscissa ordinate abscissa ordinate abscissa ordinate The left circle center petals assist a position O5 -113 +35 -90 +28 -68 +21 The left circle center petals auxiliary second position O6 -132 +32 -106 +26 -79 +19 The left circle center petals auxiliary three-position O7 -145 +15 -116 +12 -87 +12 The left auxiliary petals round one, two, three diameter 5 400 320 240 Petals hearts four round the left side of the auxiliary position O8 -210 -255 -168 +204 -168 +153 The left circle center five petals auxiliary position O9 -228 -235 -182 -188 -137 -141 The left circle center six petals auxiliary position O10 -234 -214 -187 -171 -140 -128 The left auxiliary petals round four, five, six diameter 6 470 376 282 The left circle center seven petals auxiliary position O11 -300 -37 -240 -30 -180 -22 The left auxiliary circle seven petals diameter 7 160 128 96 A. 4 with O as the center point for the five-pointed star with a diameter of a circle 8 positioning aid, with its point of intersection with the vertical axis as the center forward as a circumscribed circle Diameter 9 positive five-pointed star, with O as the center point above the horizontal axis for the four radiation, and α1 is 70 °, α2 of 130 °, and to radiation Pentagram location assistance circle centered on the intersection point of the diameter of the circumscribed circle to make four are 10 positive pentagram, pentacle all sharp angle toward all O points (Figure A.4, Table A.4). Figure A. 4 Table A. 4 millimeters Project Figure A. 4 code specification No. 1 on the 23rd Pentagram location assistance circle diameter 8 560 448 336 Big star circumscribed circle diameter 9 130 104 78 Small five-pointed star of the circumscribed circle diameter 10 90 72 54 A five-pointed star positioning angle α1 70 ° Pentagram two α2 130 ° positioning angle A. 5 for 11 from the lotus base level down to the inner circle of green belt outside assisted A1 to A6, B1 to B5. A1 and inter Lotus Bridge Distance, B1 as a white bridge height. In O12, O13 as the center for two auxiliary circle diameter are 11 of the arc with the bridge connected auxiliary belt B1 Then constitute the bridge (Figure A.5, Table A.5). Figure A. 5 Table A. 5 millimeters Project Figure A. 5 code specification No. 1 on the 23rd Abscissa ordinate abscissa ordinate abscissa ordinate Lotus Bridge and spacing A1 15 12 9 Bridge height B1 20 16 12 Seawater (white part) of the width B2 10 8 6 B3 15 12 9 B4 20 16 12 B5 25 20 15 Seawater (green) bar width A2 20 16 12 A3 20 16 12 A4 15 12 9 A5 10 8 6 A6 15 12 9 Bridge Auxiliary circle center a position O12 -138 0 -110 0 -83 0 Bridge Auxiliary circle center the second position O13 -129 -20 -103 -16 -77 -12 Bridge auxiliary circle one or two in diameter 11 400 320 240 A. 6 as the length and height ratio of the text box to locate 16 to 14, according to the word zoom in or out (Figure A.6, Table A.6). Figure A. 6 Table A. 6 millimeters Project Figure A. 6 code specification No. 1 on the 23rd Text positioning frame length L 80 64 48 Text box positioning high H 70 56 42 A. 7 O point as the center for a circle diameter of the text positioning aid 12 to point O as the center for 14 with an angle of α3 ordinate axis Axis of symmetry of the radiation in the text area above the 14 traditional Chinese characters in bold placed on the auxiliary circle and the intersection of the radiation, the lower end toward the O word point. And then to the center point O 5 as the angle between the vertical axis and α4 radiation below the axis of symmetry in the text area, the five letters placed Portuguese Text on the positioning aid and radiation circle intersection, towards the upper end of the letter O (Fig. A.7, Table A.7). Figure A. 7 Table A. 7 millimeters Project Figure A. 7 code specification No. 1 on the 23rd Text positioning assistance circle diameter 12 850 680 510 Text positioning angle α3 360 °/22 Portuguese letters orientation angle α4 12 ° 30 ' A. 8 cancel all auxiliary lines, and finally obtain the complete regional emblem (Figure A.8). Figure A. 8 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 17655-2008_English be delivered?

Answer: Upon your order, we will start to translate GB 17655-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 17655-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB 17655-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB 17655-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 17655-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.