GB/T 13352-2008 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13352-2008: Belt drives V-belts for the automotive -- Industry and corresponding pulleys -- Dimensions
Status: Valid

GB/T 13352: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 13352-2008	259	Add to Cart	3 days	Belt drives V-belts for the automotive -- Industry and corresponding pulleys -- Dimensions	Valid
GB/T 13352-1996	319	Add to Cart	3 days	Automotive V-belts--Dimensions	Obsolete
GB 13352-1992	279	Add to Cart	3 days	Automotive V-belts--Dimensions	Obsolete

Similar standards

GB/T 13552   GB/T 14905   GB/T 12585   GB/T 28267.3   GB/T 10541   

Basic data

Standard ID: GB/T 13352-2008 (GB/T13352-2008)
Description (Translated English): Belt drives V-belts for the automotive -- Industry and corresponding pulleys -- Dimensions
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G42
Classification of International Standard: 21.220.10
Word Count Estimation: 11,181
Date of Issue: 2008-06-18
Date of Implementation: 2009-02-01
Older Standard (superseded by this standard): GB/T 13352-1996; GB/T 13405-1992
Quoted Standard: GB/T 13490; GB/T 17516.1; ISO 1081
Adopted Standard: ISO 2790-2004, MOD
Regulation (derived from): National Standard Approval Announcement 2008 No.10 (Total No.123)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the cross-sectional dimensions automotive V-belts, effective length and limit deviations, exposed height, center distance variation, dimensional measurement methods and pulley size. This standard applies to automobile engine subsidiary mechanical transmission device using the V-belt and pulley.

GB/T 13352-2008: Belt drives V-belts for the automotive -- Industry and corresponding pulleys -- Dimensions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Belt drives V-belts for the automotive. Industry and corresponding pulleys. Dimensions ICS 21.220.10 G42 National Standards of People's Republic of China Replacing GB/T 13352-1996, GB/T 13405-1992 Belt drives for the automotive industry with Vp Its size pulleys (ISO 2790.2004, MOD) Posted 2008-06-18 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is a modified adoption of international standards ISO 2790.2004 (E) "with the automotive industry drive V-belt and pulley size." This standard replaces GB/T 13352-1996 "car V Size" and GB/T 13405-1992 "car V pulley" two standards. This standard and ISO 2790.2004 The main differences are as follows. According to ISO 2790.2004 re-drafting, listed in Appendix A of this standard reg number, such as ISO 2790.2004 Number of reg According to the list. Taking into account China's national conditions, in the use of ISO 2790.2004, the standard of this made some changes, the relevant technical differences have been incorporated into the text, In terms of pages and they are involved in a single vertical line identified by the margin. It is given in Appendix B of these technical differences and their reasons List for reference. For ease of use, this standard also made the following editorial changes. a) 'this International Standard' to replace the word 'this standard'; b) Remove the preface to international standards. This standard and GB/T 13352-1996 and GB/T 13405-1992 main changes are as follows. --- Increasing the size of note about AV15 model, and according to Russian standards ГОСТ5813-1993 the groove top width of the wheel AV15 Modify the original 15.2mm 14.7mm (1992 edition 4.1, this version 5.1); --- Remove the height of the V-belt (1996 version 3.1); --- AV17 with top width from the original 16.5mm modified to 17mm (1996 edition 3.1, this version 4.2.1); --- Deleted AV20 a groove dimensions, adding a groove AV22 Size (1992 version 4.1, this version 5.1). The Standard Appendix A and Appendix B are informative. The standard proposed by China Petroleum and Chemical Industry Association. This standard tape by the chemical industry Standardization Technical focal point. This standard was drafted. Zijingang Belt Co., Ltd. Zhejiang three-dimensional rubber products, rubber Wuxi City in good company there, Rui Ma On Shan Sheng Industrial Co., Northwestern Polytechnical University, Ningbo lush Far East Rubber Co., Ltd., Qingdao Rubber Industry Research Institute. The main drafters of this standard. Pang Long Zhi, Zheng Youcan, Chentie Ming, Zhang Fang, Zhu Shusheng, Liu Zhigang, Li Shujun, Zeng Jun, Hand deep, promise?. This standard replaces the standards previously issued as follows. --- GB/T 13352-1992, GB/T 13352-1996; --- GB/T 13405-1992. Belt drives for the automotive industry with Vp Its size pulleys

1 Scope

This standard specifies the cross-sectional size car V-belt (hereinafter referred to as V-belt), the effective length and limit deviations, exposing the height of center distance variation Quantity, size measurement methods and pulley size. This standard applies to cars with internal combustion engines using mechanical transmission subsidiary of V-belt and pulley.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms of dated references, all subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to study under this agreement is standard Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 13490 uniformity center V-banding method for measuring the amount of pitch change (GB/T 13490-2006, ISO 9608. 1994, IDT) Dynamic test GB/T 17516.1 V and ribbed belt drives to determine pitch location - Part 1. V belt (GB/T 17556.1-1998, idt ISO 8370.1993) ISO 1081 V-belts and ribbed drive belt and wheel groove term 3 Terms, definitions and symbols ISO 1081 to determine the terms, definitions and symbols apply to this standard.

4 Vp band

4.1 Category Category V belt according to the belt pulley wheel being equipped with groove shape can be divided into AV10, AV13, AV15, AV17, AV22 five models. 4.2 Dimensions 4.2.1 cross-sectional dimension Sectional shape of the V-belt and the top width of the nominal value as shown in Figure 1 and Table 1 below. V belt wheel groove section plane position is determined by the difference between the effective line Chou e, Chou e values \u200b\u200bcan be determined according to GB/T 17516.1, this standard Chou e Value shall be carried out standards, in addition to users and manufacturers have a special agreement. Public V band called wedge angle of 40 °. A cross-sectional view of FIG. 1 Vp band ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13352-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13352-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13352-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13352-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 13352-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13352-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.