GB 11662-2012 English PDFUS$199.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 11662-2012: [GB/T 11662-2012] Health protection zone for sintering industry Status: Obsolete GB 11662: Historical versions
Basic dataStandard ID: GB 11662-2012 (GB11662-2012)Description (Translated English): [GB/T 11662-2012] Health protection zone for sintering industry Sector / Industry: National Standard Classification of Chinese Standard: C51 Classification of International Standard: 13.100 Word Count Estimation: 5,544 Older Standard (superseded by this standard): GB 11662-1989 Quoted Standard: GB/T 3840-1991 Regulation (derived from): National Standards Bulletin No. 31 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Chinese standard specifies the sintering sensitive area businesses and health protection distance required between. This standard applies to companies located in the plains of sintered new construction, renovation, expansion project. Existing compani GB 11662-2012: [GB/T 11662-2012] Health protection zone for sintering industry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Health protection zone for sintering industry ICS 13.100 C51 National Standards of People's Republic of China Replacing GB 11662-1989 Sintering Industry Health Protection Issued on. 2012-11-20 2013-05-01 implementation People's Republic of China Ministry of Health Standardization Administration of China released Foreword4.2 to 4.4 of this standard are recommended, the rest are mandatory. This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB 11662-1989 "from the sintering plant health protection standards", compared with GB 11662-1989 major technological changes as follows. --- Adjust the standard name, and according to GB/T 1.1-2009 standard structure adjustment; --- Amendments to the definition of health protection distance, increasing the sensitive area, complex terrain, firing three terms and definitions; --- Revised the Health protection zone standard limits; --- Increased requirements for greening. This standard is proposed and administered by the People's Republic of China Ministry of Health. The standard by the China Center for Disease Control Environmental Health and Related Product Safety, Medical College of Wuhan University of Science and Technology is responsible for drafting. The main drafters of this standard. Jin Yinlong, Zhang Ling, Hong Yanfeng, long before Zhu, Zhang, Mei Yong, Yang Wenjing, Wu Lei, the Anli, Yefang Li, Xu Ning. This standard replaces the standards previously issued as follows. --- GB 11662-1989. Sintering Industry Health Protection1 ScopeThis standard specifies the health protection distance required between businesses and sintering sensitive areas. This standard applies to new construction, renovation, expansion project is located in the plains of sintering enterprises. Existing companies may refer to sintering.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3840-1991 development of local air pollutant emission standards of technical methods3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Health protection healthprotectionzone Factors adversely department (workshop or workplace) to the sensitive border zone boundary minimum distance. 3.2 Sensitive area sensitivearea Residential areas, schools, hospitals and other air pollution sensitive areas. 3.3 Complex terrain complicatedlandform Mountains, hills, coastal. 3.4 Sintering sintering The powder compacts or powder which is heated to below the melting point of the main component, and to certain methods and speed of the cooling to room temperature, Thereby effect bonding between the particles, increasing the strength of the sintered body.4 index requirements4.1 Health protection zone sintering industry standard limits are shown in Table 1. Table 1 Sintering Health protection industry standard limits Region the past five years the average wind speed m/s Health protection < 2700 2 ~ 4600 > 4500 4.2 Determination located in the complex terrain of sintering enterprises health protection distance reference GB/T 3840-1991 7.6 The Regulation Scheduled execution. 4.3 Enterprise and firing position sensitive areas, should consider the impact of factors such as wind direction and topography frequency to minimize its atmospheric environment sensitive areas Pollution. Enterprise 4.4 within the health protection distance range, densely planted trees plants green belt (width less than 10m), and according to health 90% protection from the standard limit of execution. Attention to the selection of species resistant characteristics of pollutants or adsorption characteristics. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 11662-2012_English be delivered?Answer: Upon your order, we will start to translate GB 11662-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 11662-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB 11662-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 11662-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 11662-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
