GB 11655.6-2012 English PDFUS$199.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 11655.6-2012: [GB/T 11655.6-2012] Health protection zone for synthetic material industry -- Part 6: Chloroprene rubber industry Status: Obsolete
Basic dataStandard ID: GB 11655.6-2012 (GB11655.6-2012)Description (Translated English): [GB/T 11655.6-2012] Health protection zone for synthetic material industry -- Part 6: Chloroprene rubber industry Sector / Industry: National Standard Classification of Chinese Standard: C51 Classification of International Standard: 13.100 Word Count Estimation: 5,544 Older Standard (superseded by this standard): GB 11655-1989 Quoted Standard: GB/T 3840-1991 Regulation (derived from): National Standards Bulletin No. 31 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Chinese standard applies to neoprene production enterprises and sensitive area health protection distance required between. This standard applies is located in the plains of chloroprene rubber producers new construction, renovation, expansion project GB 11655.6-2012: [GB/T 11655.6-2012] Health protection zone for synthetic material industry -- Part 6: Chloroprene rubber industry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Health protection zone for synthetic material industry.Part 6. Chloroprene rubber industry ICS 13.100 C51 National Standards of People's Republic of China Replacing GB 11655-1989 Composites Manufacturing Health protection Part 6. chloroprene rubber manufacturing Part 6. Chloroprenerubberindustry Issued on. 2012-11-20 2013-05-01 implementation People's Republic of China Ministry of Health Standardization Administration of China released ForewordGB 11655 "manufacturing composite materials from the Health Protection" is divided into nine sections. --- Part 1. PVC manufacturing; --- Part 2. Polyethylene Manufacturing; --- Part 3. Polypropylene Manufacturing; --- Part 4. polystyrene manufacturing; Part --- Article 5. ABS manufacturing; --- Part 6. chloroprene rubber manufacturing; --- Part 7. butadiene rubber manufacturing; --- Part 8. styrene-butadiene rubber manufacturing; --- Part 9. nitrile rubber manufacturing. This section 4.2 to 4.4 are recommended, the rest are mandatory. This section GB of Section 611 655. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB 11655-1989 "Neoprene plant health protection from the standards," compared to the main technical and GB 11655-1989 Changes are as follows. --- Adjust the standard name, and according to GB/T 1.1-2009 standard structure adjustment; --- Amendments to the definition of health protection distance, increasing the sensitive area of complex terrain two terms and definitions; --- Revised the Health protection zone standard limits; --- Increased requirements for greening. This part of the People's Republic of China Ministry of Health and focal points. This in part by the Chinese Center for Disease Control Environmental Health and Related Product Safety, Shandong Province Disease Prevention and Control Center is responsible for drafting, Chongqing Municipal Center for Disease Control and Prevention, Chongqing Changshou District Disease Prevention and Control Center participated in the drafting. The main drafters of this section. Jin Yinlong, Fan Ling, Hong Yanfeng, Zouli Hai, Zhang Wei, Zhang Huadong, Yang Wenjing, Suishao Feng, Zhou, Xi Gang, Yang Yulin, Xie Ming. Composites Manufacturing Health protection Part 6. chloroprene rubber manufacturing1 ScopeGB 11655 of the provisions of this part of the required health protection between chloroprene rubber producers and sensitive area distance. This section applies to areas located in the plains of chloroprene rubber producers new construction, renovation, expansion project. Existing businesses can chloroprene rubber production Implementation.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3840-1991 development of local air pollutant emission standards of technical methods3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Health protection healthprotectionzone Factors adversely department (workshop or workplace) to the sensitive border zone boundary minimum distance. 3.2 Sensitive area sensitivearea Residential areas, schools, hospitals and other air pollution sensitive areas. 3.3 Complex terrain complicatedlandform Mountains, hills, coastal.4 index requirements4.1 neoprene manufacturing sanitary protection zone standard limits are shown in Table 1. Table 1 neoprene manufacturing Health protection standard limits Region the past five years the average wind speed m/s Health protection < 21800 2 ~ 41600 > 41400 4.2 Determination located in the complex terrain of chloroprene rubber production enterprises health protection distance reference GB/T 3840-1991 in 7.6 regulations. Location 4.3 chloroprene rubber producers and sensitive areas, should consider the impact of factors such as wind direction and topography frequency to minimize its sensitive areas Pollution of the atmospheric environment. Enterprise 4.4 within the health protection distance range, densely planted trees plants green belt (width less than 10m), and according to health 90% protection from the standard limit of execution. Attention to the selection of species resistant characteristics of pollutants or adsorption characteristics. ...... |
