GB/T 10681-2009 English PDFUS$1169.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10681-2009: Tungsten filament lamps for domestic and similar general lighting purposes -- Performance requirements Status: Valid GB/T 10681: Historical versions
Basic dataStandard ID: GB/T 10681-2009 (GB/T10681-2009)Description (Translated English): Tungsten filament lamps for domestic and similar general lighting purposes -- Performance requirements Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K71 Classification of International Standard: 29.140.30 Word Count Estimation: 53,583 Date of Issue: 2009-09-30 Date of Implementation: 2010-02-01 Older Standard (superseded by this standard): GB/T 10681-2004 Quoted Standard: GB/T 1406.1; GB/T 1406.5; GB/T 1483.1; GB/T 7249; GB 14196.1-2008; IEC 60887 Adopted Standard: IEC 60064-2005, NEQ Regulation (derived from): Announcement of Newly Approved National Standards No. 10 of 2009 (No. 150 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard provides for domestic and similar general lighting purposes (hereinafter referred to as light) performance requirements, test methods, and method for determining eligibility and manufacturer of final test records related to the method of assessment for all products. This standard evaluation method can be used for authentication. This standard for batch testing procedures applicable to the assessment of a particular batch but not for certification. This standard applies to GB 14196. 1-2008 of tungsten incandescent lamps for general lighting. GB/T 10681-2009: Tungsten filament lamps for domestic and similar general lighting purposes -- Performance requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements ICS 29.140.30 K71 National Standards of People's Republic of China Replacing GB/T 10681-2004 Domestic and similar general lighting purposes Performance requirements (IEC 60064.2005A4.2007, NEQ) Posted 2009-09-30 2010-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 lamp characteristics and requirements of 4 5 4 compliance status Sampling 6 6 Principle 7 label size 7 8 signs, packaging, transportation and storage 8 9 lamp data sheet 9 Appendix A (normative) Test Procedure 38 Appendix B (normative) calculation of life and limit values \u200b\u200b40 Annex C (normative) Recommended pre-compliance testing by certified 41 Annex D (normative) Compliance Tables 43 Appendix E (normative) The standard statistical principles and the basis of 47 Annex F (normative) Test circuit characteristics stand 48 Figure 1 B22d lamp bulb shape 8 Figure 2 screw caps bulb shape 8 Table lamp types and the corresponding parameters in Table No. 4 Table 2 individual batches of Compliance Condition 6 Table 3 lights parameters Packet Table 9 Table B. The average life expectancy of a minimum limit of 40 cut-off Table C. 1 Pre-compliance testing requirements 41 Table C. 2 inspection agency allowed the rejection number 42 Table D. 1 Lamp Market sampling 20 substandard number of allowable value 43 Table D. 2 Size Requirements 43 Table D. Initial value 45 3 Table D. 4 Life Test 46 Table F. 1 200V ~ 250V lamp circuit characteristics test stand 48ForewordThis standard corresponds to IEC 60064.2005A4.2007 "for domestic and similar general lighting purposes - Performance requirements" (English Version). This standard and IEC 60064.2005A4.2007 non-equivalent degree of consistency. --- The standard according to IEC 60064.2005A4.2007 redrafted. This standard replaces GB/T 10681-2004 "for domestic and similar general lighting purposes - Performance requirements." This standard and GB/T 10681-2004 main differences are as follows. --- In Chapter 3, to increase the "luminous efficiency" is defined; --- Adds to the "initial luminous flux and luminous efficiency" of the assessment requirements in 4.2.4.2; --- In conformity assessment in line with Chapter 5 of the situation added to the initial luminous flux and luminous efficiency at the same time assess the requirements; --- In Chapter 9, "Light Parameter List" parameter adds a "nominal luminous flux and luminous efficiency" At the same expression; --- In Appendix C of C. 3.2 adds a "nominal luminous flux and luminous efficiency" At the same assessment requirements. The Standard Appendix A, Appendix B, Appendix C, Appendix D, Annex E and Annex F are normative appendix. The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee of electrical lighting (SAC/TC224) centralized. This standard was drafted. National Electric Light Source Quality Supervision and Inspection Center (Shanghai), Beijing Lighting Research Institute. The main drafters of this standard. Lu Rong tree, Zhao Xiurong, Jiang Shan, Duan Yan Fang. This part of the standard replaces the previous editions are. --- GB 10681-1989; --- GB/T 10681-2004.IntroductionThis standard describes the main technical requirements, the provisions of the basic product requirements and compliance conditions. The technical content of IEC 60064 standard reference include E26 lamp voltage 220V and below the content. But given China Currently using E27 and B22d lamp, so in this standard delete the contents of E26 lamp and content lower than 220V voltage. Also, because the white-light bulb for general lighting become increasingly important in the market, so this standard have also made provisions. The latest IEC 60064 purpose of the amendment is to improve the classification of the various kinds of lights information. For example. all the requirements have been included in a standard chapter Section, because these requirements are very important, so put in front of the chapter. Similarly, all tests are listed in the same appendix in. Specific requirements in a particular lamp table lamp parameter can be reflected. This standard adopts the main elements of IEC 60064 in preparation. For all product assessment guidelines, IEC standards of performance and safety requirements no difference. In accordance with IEC 60064 Contents in this standard included in the manufacturer's test data and evaluation of the overall product sample set of market and product performance requirements. Domestic and similar general lighting purposes Performance requirements1 ScopeThis standard specifies the domestic and similar general lighting purposes (hereinafter referred to as lamps) - Performance requirements, test methods, eligibility determination for Method and evaluation methods for all products and manufacturer of final test records related. The standard assessment methods can be used for authentication. This standard For batch testing procedures applicable to the assessment of a particular batch but not for certification. This standard applies to GB 14196.1-2008 ordinary incandescent tungsten lighting, the type comprising. --- Rated power. 15W ~ 200W (including 200W); --- Rated voltage. 220V and 230V; --- A-type or PS type bulb; --- Clear, matte, matte effect is similar to the inner coating or white-bulb; --- B22d, E27 lamp holder. The standard Chapter 9 lists specific lamp type.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1406.1 lamp types and dimensions - Part 1. screw-on cap (GB/T 1406.1-2008, IEC 60061-1. 2005, Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeabilityandsafety- Part 1. Lampcaps, MOD) GB/T 1406.5 lamp types and dimensions - Part 5. Bayonet cap (GB/T 1406.5-2008, IEC 60061-1. 2005, Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeabilityandsafety- Part 1. Lampcaps, MOD) GB/T 1483.1 Lamp caps Gauges - Part 1. Screw-type lamp holder gauge (GB/T 1483.1-2008, IEC 60061-3.2004, Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeability andsafety-Part 3. Gauges, MOD) GB/T 7249 incandescent Maximum dimensions (GB/T 7249-2008, IEC 60630.2005, IDT) Incandescent GB 14196.1-2008 Safety requirements - Part 1. domestic and similar general lighting purposes (IEC 60432- 1.2005, IDT) IEC 60887 bulb bulb naming system3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Irrespective of lamp type, having the same optical parameters of the light bulb. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10681-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 10681-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10681-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10681-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10681-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10681-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
