GB/T 24478-2023 PDF English
US$260.00 · In stock · Download in 9 secondsGB/T 24478-2023: Traction machine of electric lifts Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 24478: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 24478-2023 | English | 260 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Traction machine of electric lifts
| Valid |
| GB/T 24478-2009 | English | 439 |
Add to Cart
|
3 days
|
Traction machine of electric lifts
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 24478-2023
GB/T 24478-2023: Traction machine of electric lifts---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT24478-2023
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 91.140.90
CCS Q 78
Replacing GB/T 24478-2009
Traction Machine of Electric Lifts
ISSUED ON: NOVEMBER 27, 2023
IMPLEMENTED ON: JUNE 1, 2024
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 7
2 Normative References ... 7
3 Terms and Definitions ... 8
4 Technical Requirements ... 9
5 Test Methods ... 14
6 Inspection Rules ... 18
7 Marking, Packaging, Transportation and Storage ... 20
Foreword
This document was drafted in accordance with the rules provided in GB/T 1.1-2020 Directives
for Standardization - Part 1: Rules for the Structure and Drafting of Standardizing Documents.
This document serves as a replacement for GB/T 24478-2009 Traction Machine of Electric
Lifts. In comparison with GB/T 24478-2009, apart from structural adjustments and editorial
modifications, the main technical changes are as follows:
a) The scope of application is modified (see Chapter 1; Chapter 1 of Version 2009);
b) The terms and definitions of “rated torque of traction machine” and “maximum
release voltage of brake electromagnet” are modified (see 3.2 and 3.6; 3.2 and 3.6 of
Version 2009), and the term and definition of “short-circuit braking torque of
permanent magnet synchronous motor” is added (see 3.4);
c) The general rule “The traction machine of electric lifts shall also comply with the
relevant provisions of GB/T 7588.1-2020” is added (see 4.1);
d) The requirements for the “efficiency of permanent magnet synchronous motor” are
added (see 4.3.1.7);
e) The relevant requirements for “permanent magnet synchronous motor as electrical
braking device of electric lifts” are added (see 4.3.1.8);
f) The requirement that “the motor shall have overheat protection to avoid failure of
components, such as: windings and permanent magnets, etc.” is added (see 4.3.1.9);
g) The requirement that the motor protection degree shall not be lower than IP2X is
added (see 4.3.1.10);
h) The requirements for the braking position and torque of the “brake that also serves as
the deceleration component of the upward overspeed protection device of the lift car
and the brake component of the accidental movement protection device of the lift car”
are added (see 4.3.2.2); the relevant requirements for the “grouping setting of brake
mechanical components” are modified (see 4.3.2.3; 4.2.2.2 of Version 2009); the
material requirements for the “brake pads” are modified, and the requirements for
“flame retardant performance level, wear inspection and replacement warning
information” are added (see 4.3.2.5; 4.2.2.2 of Version 2009);
i) The requirements for the “maximum release voltage” are modified (see 4.3.2.6;
4.2.2.3 of Version 2009); the requirements for the leakage current of the “brake coil
withstand voltage test” are added (see 4.3.2.6);
Traction Machine of Electric Lifts
1 Scope
This document specifies the technical requirements, test methods, inspection rules, marking,
packaging, transportation and storage of electric lift traction machines with a rated speed not
greater than 10.0 m/s.
This document applies to traction machines for passenger and goods lifts.
This document does not apply to traction machines for service lifts, home lifts and inclined lifts;
however, this document may be used as a reference.
This document does not apply to electric lift traction machines with hydraulically operated
brakes.
2 Normative References
The contents of the following documents constitute indispensable clauses of this document
through the normative references in the text. In terms of references with a specified date, only
versions with a specified date are applicable to this document. In terms of references without a
specified date, the latest version (including all the modifications) is applicable to this document.
GB/T 191 Packaging - Pictorial Markings for Handling of Goods
GB/T 755-2019 Rotating Electrical Machines - Rating and Performance
GB/T 1029-2021 Test Procedures for Three-phase Synchronous Machines
GB/T 1032-2012 Test Procedures for Three-phase Induction Motors
GB/T 1971 Rotating Electrical Machines - Terminal Markings and Direction of Rotation
GB/T 2900.25 Electrotechnical Terminology - Rotating Electrical Machines
GB/T 3768 Acoustics - Determination of Sound Power Levels and Sound Energy Levels of
Noise Sources Using Sound Pressure - Survey Method Using an Enveloping Measurement
Surface over a Reflecting Plane
GB/T 4208-2017 Degrees of Protection Provided by Enclosure (IP code)
GB/T 7024 Terminology of Lifts, Escalators, Passenger Conveyors
GB/T 7588.1-2020 Safety Rules for the Construction and Installation of Lifts - Part 1: Passenger
and Goods Passenger Lifts
4 Technical Requirements
4.1 General
The traction machine of electric lifts specified in this document shall also comply with the
relevant provisions of GB/T 7588.1-2020.
4.2 Working Conditions
The working conditions of the traction machine of electric lifts meet the following requirements.
a) The altitude does not exceed 1,000 m. If the altitude exceeds 1,000 m, then, the
temperature and temperature rise limit of the motor and brake shall be corrected in
accordance with the provisions of 8.10 in GB/T 755-2019.
b) The ambient air temperature shall be maintained at 5 C ~ 40 C.
c) The relative humidity of the air at the operating location does not exceed 50% when
the maximum temperature is 40 C. At relatively low temperatures, the relative
humidity may be higher. The monthly average minimum temperature of the wettest
month shall not exceed 25 °C, and the monthly average maximum relative humidity
of that month shall not exceed 90%. If condensation is likely to be generated on the
equipment, then, corresponding measures shall be taken.
d) The fluctuation of the power supply voltage relative to the system nominal voltage
shall be within the range of 7%.
e) The ambient air shall not contain corrosive and flammable gases.
4.3 Performance Requirements
4.3.1 Motor
4.3.1.1 For synchronous motors, when the input voltage to the motors is at the maximum value
and the rotational speed of the motors is maintained at the rated value, the over-torque shall not
be less than 1.5 times the rated value. For traction machines with a rated torque greater than
700 N m or for electric lifts with a rated speed greater than 2.5 m/s, the over-torque may be
agreed upon by the traction machine manufacturer and the user. When the synchronous motor
is subjected to the above-mentioned torque for 15 seconds, no phenomenon that affects the
normal operation of the motor shall occur.
4.3.1.2 The ratio of the stall torque of an asynchronous motor to the rated torque shall not be
less than 2.2, and for the low-speed winding of a multi-speed asynchronous motor, it shall not
be less than 1.4.
4.3.1.3 In accordance with the provisions of 5.1.1 in GB/T 1032-2012, the insulation resistance
of the stator winding shall not be less than 0.5 M in the hot state or at the end of the
overspeed protection device of the lift car and the brake component of the accidental movement
protection device of the lift car, its braking torque and braking position shall also comply with
the provisions of 5.6.6 and 5.6.7 in GB/T 7588.1-2020.
4.3.2.3 All mechanical components of the brake (including the electromagnet moving iron core)
involved in applying the braking force to the brake wheel (disc) shall be installed in at least two
groups. The electromagnet coil, static iron core and parts guiding the moving iron core of the
electromechanical brake shall also be installed in at least two groups. When used on an electric
lift, if one of the groups does not work due to component failure, there shall still be sufficient
braking force to decelerate, stop and keep still the lift car with a rated load descending at a rated
speed and the no-load lift car ascending at a rated speed.
4.3.2.4 The braking system shall have a monitoring device or function to ensure that the brake
is properly lifted (or released).
4.3.2.5 Brake pads shall not contain asbestos material. The flame retardant performance of
brake pads shall at least reach Level B1 specified in GB 8624. Near the brake, there shall be
warning information (such as: test methods and replacement conditions, etc.) for replacing worn
brake pads.
4.3.2.6 Under the situation where 4.3.2.2 is satisfied, the minimum pull-in voltage of the brake
electromagnet shall be lower than 80% of the rated voltage; the maximum release voltage of
the brake electromagnet shall be lower than 40% of the rated voltage and shall not be lower
than 10% of the rated voltage.
The release time of the brake shall not be greater than 0.5 s. For the traction machine brake that
also serves as the deceleration component of the upward overspeed protection device of the lift
car and the brake component of the accidental movement protection device of the lift car, the
release time of the brake shall also be agreed upon with the traction machine user.
When an AC voltage of 1,000 V is applied between the conductive part of the brake coil and
the ground for a duration of 60 s, the leakage current shall not be greater than 100 mA.
4.3.2.7 The brake shall be subjected to no less than 2 million fault-free action tests. During the
test, no maintenance shall be performed. After the test, its performance shall still comply with
the provisions of 4.3.2.2 and 4.3.2.6. The brake operation monitoring device (if any) shall be
able to normally work.
4.3.2.8 The manual brake release device shall comply with the provisions of 5.9.2.2.2.7 in GB/T
7588.1-2020.
4.3.3 Requirements for other performance
4.3.3.1 The ratio of the pitch diameter of the traction sheave to the nominal diameter of the wire
rope shall not be less than 40. For electric lift traction machines using covered rope (belt)
suspension devices, the ratio of the pitch diameter of the traction sheave to the nominal diameter
(or nominal thickness) of the carrier shall not be less than 40.
of use.
4.3.3.12 If the output shaft gear components of the geared traction machine are connected by
bolts, then, the bolt assemblies shall have anti-falling measures.
4.4 Other Requirements
4.4.1 The protection of the traction machine shall comply with the requirements of 5.5.7 and
5.9.1.2 in GB/T 7588.1-2020. For traction machines using covered rope (belt) suspension
devices, the protective device between the covered rope (belt) and the traction sheave that
prevents foreign matter from entering shall be able to prevent sand particles with a diameter
greater than or equal to 2.5 mm from entering. A protective device shall be installed to prevent
the covered rope (belt) from jumping out of the groove or abnormally moving sideways on the
traction sheave. The fixed parts of the protective device shall comply with the provisions of
0.4.21 in GB/T 7588.1-2020.
4.4.2 The encoder (if any) for the traction machine shall have anti-interference shielding and
anti-collision mechanical protection.
4.4.3 The exterior coating shall be uniform; the paint film shall firmly adhere and have sufficient
adhesion. Exposed rotating components shall be painted yellow, the manual release device of
the traction machine brake shall be at least partially painted red, and the handwheel of the
traction machine shall be at least partially painted yellow.
4.4.4 All signs and warnings shall comply with the provisions of 5.1.2 in GB/T 7588.1-2020.
4.4.5 The traction machine brake that also serves as the deceleration component of the upward
overspeed protection device of the lift car and the brake component of the accidental movement
protection device of the lift car shall be provided with a nameplate in accordance with the
provisions of 5.6.6.12 and 5.6.7.14 in GB/T 7588.1-2020. The nameplate content shall also
include the following parameters applicable to the brake component and the deceleration
component:
a) Allowable system mass range;
b) Allowable rated loading capacity range;
c) Action speed range (the deceleration component of the upward overspeed protection
device);
d) The maximum speed range expected before the lift car decelerates (the brake
component of the accidental movement protection device of the lift car).
5 Test Methods
5.1 Motor Over- (locked-rotor) torque
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 24478-2023 be delivered?Answer: The full copy PDF of English version of GB/T 24478-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 24478-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24478-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 24478-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 24478-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24478-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 24478-2023?A step-by-step guide to download PDF of GB/T 24478-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 24478-2023".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|