HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB 28316-2012 PDF English

US$150.00 · In stock · Download in 9 seconds
GB 28316-2012: National food safety standard - Food additives - Lycopene
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB 28316-2012English150 Add to Cart 0-9 seconds. Auto-delivery National food safety standard - Food additives - Lycopene Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB 28316-2012
      

Similar standards

GB 28314   GB 28308   GB 28307   GB 28306   

GB 28316-2012: National food safety standard - Food additives - Lycopene

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB28316-2012
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA National food safety standard - Food additive - Lycopene ISSUED ON: APRIL 25, 2012 IMPLEMENTED ON: JUNE 25, 2012 Issued by: Ministry of Health of PRC

Table of Contents

1 Scope ... 3 2 Molecular formula, structural formula, relative molecular mass ... 3 3 Technical requirements ... 3 Appendix A Testing method ... 5 National food safety standard - Food additive - Lycopene

1 Scope

This standard applies to the food additive lycopene which is prepared by tomato (Lycopersicon) or tomato products as raw materials, using supercritical fluid (including carbon dioxide, etc.) or organic solvents as the extraction medium.

2 Molecular formula, structural formula, relative

molecular mass 2.1 Molecular formula Lycopene: C40H56 2.2 Structural formula All-trans lycopene chemical structure 2.3 Relative molecular mass 536.87 (according to 2007 international relative atomic mass)

3 Technical requirements

3.1 Sensory requirements: It shall meet the requirements of Table 1.

Appendix A

Testing method A.1 General provisions The reagents and water used in this standard refer to analytical reagents and the level 3 water as specified in GB/T 6682-2008, unless otherwise specified. The standard titration solution, standard solution for impurity determination, preparations and products used in the test are all prepared in accordance with the requirements of GB/T 601, GB/T 602, GB/T 603, unless otherwise specified. The solution used in the test refers to an aqueous solution when it is not specified which solvent is used for preparation. A.2 Identification test A.2.1 Solubility Easily soluble in ethyl acetate and n-hexane, partially soluble in ethanol and acetone, but insoluble in water. A.2.2 Color reaction Weigh about 0.01 g of the specimen and dissolve it in 10 mL of acetone, to form an orange-red transparent solution. Continuously add an equal volume of 5% sodium nitrate solution (5 g dissolved in 100 mL water) and 1 mol/L sulfuric acid solution. The color becomes lighter. A.2.3 Characteristic absorption peak Take an appropriate amount of specimen and dissolve it in n-hexane. This specimen solution has characteristic absorption peaks at wavelengths around 446 nm, 472 nm, 505 nm. A.3 Determination of lycopene content A.3.1 Reagents and materials A.3.1.1 Dichloromethane: Chromatographically pure. A.3.1.2 Acetonitrile: Chromatographically pure. A.3.1.3 Ethyl acetate: Chromatographically pure. A.3.1.4 Water: Level 1 water. A.3.1.5 Ethanol. A.3.1.6 Petroleum ether: Boiling range 60 °C ~ 90 °C. A.3.1.7 2,6-Di-tert-butyl-p-cresol (BHT). A.3.1.8 Lycopene reference substance: Purity ≥ 90%. A.3.2 Instruments and equipment A.3.2.1 High performance liquid chromatograph. A.3.2.2 UV-Visible spectrophotometer. A.3.3 Reference chromatographic conditions A.3.3.1 Chromatographic column: The stationary phase is C18, 250 mm × 4.6 mm, 5 μm; or other equivalent chromatographic column. A.3.3.2 Column temperature: 25 °C. A.3.3.3 Detector: UV/visible light detector or diode array detector. A.3.3.4 Detection wavelength: 472 nm. A.3.3.5 Mobile phase: Mobile phase A is acetonitrile solution (9 + 1); mobile phase B is ethyl acetate. The elution condition is a binary linear gradient: Mobile phase B rises from 0% to 100% within 20 minutes; after 20 minutes, mobile phase B keeps running at 100% for 5 minutes. A.3.3.6 Flow rate: 1.0 mL/min. A.3.3.7 Injection volume: 10 μL. A.3.4 Analytical procedures A.3.4.1 Preparation of BHT solution Accurately weigh 2.5 g of BHT and place it in a 500 mL brown volumetric flask. Use dichloromethane to make its volume reach to the mark. The concentration is 5000 mg/L. Place it in a closed and dark place. It can be stored stably for 3 months. A.3.4.2 Preparation of lycopene reference substance solution Weigh 10 mg of lycopene reference substance and 20 mg of BHT, respectively, accurate to 0.000 1 g. Take a small amount of dichloromethane to dissolve. Transfer it into a 100 mL brown volumetric flask. Use dichloromethane to make its volume reach to the mark. Mix it uniformly. Because lycopene is unstable, the lycopene reference substance solution shall be calibrated for its purity by A.3.4.3 method before use. The lycopene reference substance solution shall be determination results. The absolute difference between two independent determination results obtained under repeatability conditions shall not exceed 2% of the arithmetic mean. A.5 Determination of ethyl acetate A.5.1 Instruments and equipment A gas chromatograph equipped with a headspace sampler and a flame ionization detector (FID). A.5.2 Reference chromatographic conditions A.5.2.1 Chromatographic column: Quartz capillary column cross-linked with 5% diphenyl to 95% polydimethylsiloxane fixing solution, 30 m × 0.53 mm, film thickness 3.0 μm; or other equivalent chromatographic columns column. A.5.2.2 Carrier gas: Nitrogen. A.5.2.3 Carrier gas flow: 4.0 mL/min. A.5.2.4 Temperature of the sample inlet: 180 °C. A.5.2.5 Column temperature: 73 °C, keep for 5 min; heat up to 160 °C at a rate of 25 °C/min, keep it for 1 min. A.5.2.6 Detector temperature: 230 °C. A.5.2.7 Injection volume: 1 mL quantitative ring. A.5.2.8 Split ratio: 1:6. A.5.3 Headspace conditions A.5.3.1 Headspace bottle's equilibrium temperature and time: 70 °C, 120.0 min. A.5.3.2 Quantitative ring's temperature: 100 °C. A.5.3.3 Transmission line's temperature: 110 °C. A.5.3.4 Mixing method: Stir for 1 min every 30 min. A.5.3.5 Pressurization time: 0.2 min. A.5.3.6 Filling time of quantitative ring: 0.2 min. A.5.3.7 Quantitative ring's equilibrium time: 0.05 min. A.5.3.8 Sample injection time: 1.0 min. A.5.3.9 Headspace bottle's pressure: 95.15 kPa (13.8 psi). A.5.3.10 Sample injection volume: 1 mL. A.5.4 Analytical procedures A.5.4.1 Preparation of control solution A.5.4.1.1 Ethyl acetate stock solution A (10000 mg/kg) Place an empty measuring bottle on the balance. After deducting the weight of the bottle, accurately add 500 mg of ethyl acetate. Then accurately add diethyl phthalate to make the solvent volume reach 50.00 g, accurate to 0.1 mg. Ultrasonically mix it uniformly. This solution can be stored stably for 2 months at room temperature. A.5.4.1.2 Ethyl acetate stock solution B (100 mg/kg) Place an empty measuring bottle on the balance. After deducting the weight of the bottle, accurately add 500 mg of ethyl acetate stock solution A. Then accurately add diethyl phthalate to make the solvent volume reach 50.00 g, accurate to 0.1 mg. Ultrasonically mix it uniformly. This solution can be stored stably for 2 months at room temperature. A.5.4.1.3 Ethyl acetate standard solution C (5 mg/kg) Place an empty measuring bottle on the balance. After deducting the weight of the bottle, accurately add 500 mg of ethyl acetate stock solution B. Then accurately add diethyl phthalate to make the solvent volume reach 10.00 g, accurate to 0.1 mg. Place in a 12 mm ~ 15 mm magnetic stir bar. Seal it. Mix it uniformly. A.5.4.1.4 Ethyl acetate standard solution D (10 mg/kg) Place an empty measuring bottle on the balance. After deducting the weight of the bottle, accurately add 1000 mg of ethyl acetate stock solution B. Then accurately add diethyl phthalate to make the solvent volume reach 10.00 g, accurate to 0.1 mg. Place in a 12 mm ~ 15 mm magnetic stir bar. Seal it. Mix it uniformly. A.5.4.1.5 Ethyl acetate standard solution E (17.5 mg/kg) Place an empty measuring bottle on the balance. After deducting the weight of the bottle, accurately add 1750 mg of ethyl acetate stock solution B. Then accurately add diethyl phthalate to make the solvent volume reach 10.00 g, accurate to 0.1 mg. Place in a 12 mm ~ 15 mm magnetic stir bar. Seal it. Mix it uniformly. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB 28316-2012 be delivered?

Answer: The full copy PDF of English version of GB 28316-2012 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB 28316-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB 28316-2012_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB 28316-2012 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB 28316-2012?

A step-by-step guide to download PDF of GB 28316-2012_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 28316-2012".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9