TSG Z6001-2019 PDF EnglishUS$1525.00 · In stock · Download in 9 seconds
TSG Z6001-2019: Examination Rules for Special Equipment Operators Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid TSG Z6001: Historical versions
Similar standardsTSG Z6001-2019: Examination Rules for Special Equipment Operators---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/TSGZ6001-2019TSG TECHNICAL SPECIFICATION FOR SPECIAL EQUIPMENT SAFETY Examination rules for special equipment operators Issued by State Administration for Market Regulation May 27, 2019 TSG TECHNICAL SPECIFICATION FOR SPECIAL EQUIPMENT SAFETY Examination Rules for Special Equipment Operators Issued by State Administration for Market Regulation May 27, 2019 Table of ContentsChapter 1 General... 4 Chapter 2 Examination agency... 5 Chapter 3 Examination and license issuance... 7 Chapter 4 Review... 9 Chapter 5 Supplementary provisions... 10 Appendix A Special Equipment Safety Management and Operator License (Form)... 13 Appendix B Application form for qualification of special equipment operator. 15 Appendix C Application form for qualification review of special equipment operator... 16 Appendix D Examination outline of special equipment safety administrator.. 17 Appendix E Examination outline for boiler operator... 27 Appendix F Examination outline for pressure vessel operators... 44 Appendix G Examination outline for cylinder filling personnel... 61 Appendix H Examination outline for elevator operator... 66 Appendix J Examination outline for lifting machinery operators... 79 Appendix K Examination outline for passenger ropeway operators... 94 Appendix L Examination outline for Operators of Large-scale amusement Facilities... 105 Appendix M Examination outline for special motor vehicle operators in the field (factory)... 115 Appendix N Examination outline for safety valve verification personnel... 135 The previous establishment (revision) status of relevant regulations and specifications... 142 Examination rules for special equipment operators Chapter 1 General Article 1 In order to regulate the examination of special equipment operators, these rules are formulated, in accordance with the "Special Equipment Safety Law of the People's Republic of China", "Provisions on the Supervision of Special Equipment Safety", "Methods for Supervision and Management of Special Equipment Operators". Article 2 These rules are applicable to the qualification examination of special equipment operators (including safety management personnel), within the scope of the "Classification and Projects for Qualification Recognition of Special Equipment Operators", which was formulated AND issued by the State Administration for Market Regulation. For the welding operators of special equipment, the qualification examination shall also meet the requirements of relevant safety technical specifications. Article 3 Special equipment operators shall, in accordance with the requirements of these rules, obtain the "Special Equipment Safety Management and Operator Certificate" (see Appendix A for the format), before engaging in corresponding operations. Article 4 For the examination and license issuance of special equipment operators, they shall be handled, in levels, by the local market supervision- management department at or above the county level. For the specific license- issuing authority and license-issuing items, they shall be determined and announced by the provincial market supervision-management department. Article 5 The license-issuing authority entrusts the examination agency to organize the examination; OR organizes the examination on its own. Article 6 The provincial market supervision-management department is responsible for formulating the specific conditions and entrustment requirements of examination agency. Article 7 For the projects, where there are less operators, such as hyperbaric chamber, large-scale recreation facility, passenger ropeways, safety valves, the license shall be issued by the provincial market supervision-management department. Article 8 The State Administration of Market Supervision is responsible for the supervision and management of the examination of special equipment operators nationwide. The local market supervision-management department, at or above the county level, is responsible for the supervision and management of the examination of special equipment operators, within its administrative area, AND the supervision and inspection of examination agency. Chapter 2 Examination agency Article 9 Examination agency shall meet the following basic conditions. Article 11 Examination agency shall conduct theoretical knowledge examinations and practical skills examinations, for qualified applicants, at their examination centers and examination bases. For special reasons, if it is necessary to use an examination base, other than the institution, to conduct the examination, it shall report to the license-issuing authority, for written consent, in advance. Examination agency shall not engage in the training work of entrusted examination items. Article 12 For the examination outline for various types of special equipment operators, it can be found in the Appendix of this Rule. Chapter 3 Examination and license issuance Article 13 The examination procedures for special equipment operators include application, acceptance, examination, license issuance. Article 14 Applicants shall meet the following conditions. (1) The age is over 18 but not more than 60 years old; has full capacity for civil conduct; (2) It has no diseases and physical defects that hinder the job; meanwhile meets the physical requirements of the job application for which it is applied; (3) Have a junior high school degree or above; have an education level that meets the requirements of the corresponding application work items; (4) Meet the specific requirements of the corresponding examination outline. Article 15 Applicants shall submit the following application materials to the license-issuing authority of the place of work or residence (household or residence permit). (1) "Application Form for the Qualification of Special Equipment Operator" (see Appendix B, 1 copy); (2) Recent 2-inch frontal bareheaded color photos (2 photos), in white background; (3) Identity certificate (1 copy); (4) Certificate of academic qualifications (1 copy); (5) Physical examination report (1 copy, as required by the corresponding examination outline). Applicants may also fill in the application, through the online registration system, which is designated by the license-issuing authority; attach the scanned documents (PDF or JPG format) of the materials required to be submitted in the preceding paragraph. Article 17 The examination agency shall announce the examination time, location, operation item, and other matters, 2 months before the examination. If it is necessary to change the examination time, place, operation items, it shall promptly notify the applicants who have registered. the requirements of the corresponding examination outline; follow the principles of openness, fairness and impartiality; strictly implement the examination management system; ensure the quality of examination work. Article 20 The examinations for special equipment operators include theoretical knowledge examinations and practical operation skills examinations. Special equipment safety management personnel is only subject to theoretical knowledge examinations. The examination is implemented in a hundred-point system. If a single subject scores 70 points, it is qualified; if each subject is qualified, the examination is judged as qualified. Article 21 The test results are valid for one year. Those who fail a single test subject can apply for a make-up test, from the original test agency, within one year. Those who fail in both subjects OR fail the make-up test, shall submit a new application for the examination to the license-issuing authority. Article 22 The examination agency shall announce the list of qualified persons, within 20 working days after the examination; submit the examination results to the license-issuing authority. If the applicant inquires about the results from the examination agency, the examination agency shall inform the result to the applicant. Article 23 If the license-issuing authority organizes the examination on its own, it shall meet the above requirements. Article 24 The license-issuing authority shall complete the examination, approval, license issuance, within 20 working days after receiving the examination results. Chapter 4 Review Article 25 A license holder shall, one month before the expiration of the validity period of the certificated item, submit an application for re-examination to the license-issuing authority, at the place of work or residence (household or residence permit); submit the following materials. Article 27 When the license-issuing authority handles the review, it shall log in to the "National Special Equipment Public Information Query Platform", to verify the authenticity and validity of the "Special Equipment Safety Management and Operator License". If it cannot be verified, the applicant shall apply for license again OR return to the original license-issuing authority to submit an application for review. Article 28 When the license-issuing authority handles the review, if it is able to do it on the spot, it shall complete it on the spot; if the application materials need to be supplemented and corrected, it shall be notified all at once. Article 29 If the holder of the license who fails to pass the review OR who has not applied for the review after the expiry of the certificate expires, BUT needs to continue to engage in the activities of the item, he shall apply for license again. Article 30 Special equipment welding operators shall review, in accordance with the provisions of the corresponding safety technical specifications. Article 34 If the "Special Equipment Safety Management and Operator License" is lost or damaged, the holder of the license shall apply to the original license-issuing authority for reissuance; Article 35 Applicants, who have objections to the examination results, may submit a request for review to the examination agency, within 1 month after the examination results are released. The examination agency shall reply, within 20 working days of receiving the application for review. If it has objections on the reply results from the examination agency, it may file a complaint with the issuing agency, in writing. If the license-issuing authority organizes the examination on its own, the applicant shall submit a request for review to the license-issuing authority. Article 36 The "Special Equipment Safety Management and Operator License" can be printed with a QR code. Article 37 The term "above" in this Rule includes the number; the term "not exceeding" does not include the number Article 38 The State Administration for Market Regulation is responsible for the interpretation of this Rule. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of TSG Z6001-2019 be delivered?Answer: The full copy PDF of English version of TSG Z6001-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of TSG Z6001-2019_English with my colleagues?Answer: Yes. The purchased PDF of TSG Z6001-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- TSG Z6001-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version TSG Z6001-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version TSG Z6001-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of TSG Z6001-2019?A step-by-step guide to download PDF of TSG Z6001-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "TSG Z6001-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
