YY/T 0802.1-2024 PDF EnglishUS$380.00 · In stock · Download in 9 seconds
YY/T 0802.1-2024: Processing of medical devive - Information to be provided by the medical device manufacturer - Part 1: Critical and semi-critical medical devices Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid YY/T 0802.1: Historical versions
Similar standardsYY/T 0802.1-2024: Processing of medical devive - Information to be provided by the medical device manufacturer - Part 1: Critical and semi-critical medical devices---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YYT0802.1-2024 YY PHARMACEUTICAL INDUSTRY STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA ICS 11.080.01 CCS C 47 Replacing YY/T 0802-2020 Processing of medical device - Information to be provided by the medical device manufacturer - Part 1.Critical and semi- critical medical devices (ISO 17664-1.2021, Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices - Part 1.Critical and semi-critical medical devices, MOD) Issued on: SEPTEMBER 29, 2024 Implemented on: OCTOBER 15, 2025 Issued by. National Medical Products Administration Table of ContentsForeword... 3 Introduction... 5 1 Scope... 7 2 Normative references... 8 3 Terms and definitions... 8 4 Validation of the processing in information... 11 5 Risk analysis... 11 6 Information provided by medical device manufacturers... 12 7 Information expression... 20 Appendix A (Informative) Common processing methods... 21 Appendix B (Informative) Examples of information on the processing of reusable medical devices... 28 Appendix C (Informative) Classification of medical devices... 30 Appendix D (Informative) Additional guidance on information required from medical device manufacturers... 33 References... 34ForewordThis document was drafted in accordance with the provisions of GB/T 1.1-2020 Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents. This document is part 1 of YY/T 0802 Processing of medical device - Information to be provided by the medical device manufacturer. YY/T 0802 has been published in the following parts. -- Part 1.Critical and semi-critical medical devices; -- Part 2.Non-critical medical devices. This document replaces YY/T 0802-2020 Processing of medical devices - Information to be provided by the medical device manufacturer. Compared with YY/T 0802-2020, in addition to structural adjustments and editorial changes, the main technical changes are as follows. -- The scope has been changed (see Chapter 1; see Chapter 1 of the 2020 edition); -- The term and definition of "medical device manufacturer" have been changed (see 3.5; see 3.5 of the 2020 edition); -- The content of the processing instructions has been changed (see 6.2; see 6.2 of the 2020 edition); -- The content of immediate on-site treatment after use has been changed (see 6.4; see 6.4 of the 2020 edition); This document is modified in relation to ISO 17664-1.2021 Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices - Part 1.Critical and semi-critical medical devices. The technical differences between this document and ISO 17664-1.2021 and their reasons are as follows. -- The term and definition "3.5 medical device" have been deleted to coordinate with regulations. The following editorial changes were made to this document. -- The note to the term and definition of "3.5 medical device manufacturer" has been deleted. Processing of medical device - Information to be provided by the medical device manufacturer - Part 1.Critical and semi- critical medical devices1 ScopeThis document specifies the requirements for information to be provided by medical device manufacturers regarding the processing of critical and semi-critical medical devices (i.e., medical devices that enter normally sterile areas of the human body, or medical devices that contact mucous membranes or non-intact skin) or medical devices that are to be sterilized. This document applies to information on the processing prior to the use or reuse of medical devices. This document does not define processing instructions, but rather specifies requirements for medical device manufacturers to provide detailed processing instructions that include the following applicable steps. a) immediate on-site processing after use; b) preparation before cleaning; c) cleaning; d) disinfection; e) drying; f) inspection and maintenance; g) packaging; h) sterilization; i) storage; j) Transportation. This document does not apply to the processing of the following items. -- Non-critical medical devices that are not intended to be sterilized; A documented procedure for obtaining, recording and interpreting the results necessary to determine that a process consistently produces product conforming to predetermined specifications. 3.20 verification To confirm by providing objective evidence that specified requirements have been met. [Source. ISO 9000.2015, 3.8.13, modified] 3.21 washer-disinfectors; WD Equipment that is expected to clean and disinfect items. [Source. ISO 11139.2018, 3.319, modified]4 Validation of the processing in information4.1 The medical device manufacturer shall validate each processing step in the information provided with the medical device. Validation shall confirm that each processing step is appropriate. 4.2 The medical device manufacturer shall provide objective evidence that the validation of processing has been performed to demonstrate that the medical device will be clean, disinfected and/or sterilized after processing in the specified sequence. NOTE 1.In addition to the manufacturer's obligation to prove the validity of the information provided, the relevant management department can also require the processor to verify the final validity of the processing. NOTE 2.The relevant management department may allow or require the use of other methods for processing. In this case, it is usually necessary for the processor to confirm the effectiveness of the processing method. 4.3 If different medical devices provided by the manufacturer have common properties, their validation can be carried out as a product family. If this approach is adopted, the medical device manufacturer shall confirm the commonalities between the different medical devices and consider the most unfavorable state of the product family in the validation. NOTE. See C.1 in Appendix C.5 Risk analysisMedical device manufacturers shall conduct risk analysis to determine the content and ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of YY/T 0802.1-2024 be delivered?Answer: The full copy PDF of English version of YY/T 0802.1-2024 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of YY/T 0802.1-2024_English with my colleagues?Answer: Yes. The purchased PDF of YY/T 0802.1-2024_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YY/T 0802.1-2024 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version YY/T 0802.1-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY/T 0802.1-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of YY/T 0802.1-2024?A step-by-step guide to download PDF of YY/T 0802.1-2024_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "YY/T 0802.1-2024". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
