YY 1881-2023 PDF EnglishUS$860.00 · In stock · Download in 9 seconds
YY 1881-2023: Powered air-purifying respirator (PAPR) used in healthcare settings Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsYY 1881-2023: Powered air-purifying respirator (PAPR) used in healthcare settings---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YY1881-2023YY PHARMACEUTICAL INDUSTRY STANDARD ICS 11.140 CCS C 47 Powered air-purifying respirator (PAPR) used in healthcare settings Issued on. JUNE 20, 2023 Implemented on. JULY 01, 2025 Issued by. National Medical Products Administration Table of ContentsForeword... 5 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Classification and tags... 9 5 Requirements... 10 6 Test methods... 16 7 Marks and instructions for use... 34 8 Packaging and storage... 36 Annex A (normative) Evaluation of practical performance... 37 Annex B (normative) Test methods for noise and prompt volume... 40 Annex C (normative) Test methods for call performance... 43 Annex D (normative) Test methods for field of view... 52 Annex E (informative) Summary of testing requirements... 56 Annex F (informative) Headforms... 58 Bibliography... 59ForewordThis document was drafted in accordance with the rules given in GB/T 1.1-2020 "Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents". Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority shall not be held responsible for identifying any or all such patent rights. This document was proposed by National Medical Products Administration. This document shall be under the jurisdiction of Technical Organization responsible for Standardization of Medical Biological Protection Products. Powered air-purifying respirator (PAPR) used in healthcare settings1 ScopeThis document specifies the classification and tags, requirements, test methods, marks and instructions for use, packaging and storage of powered air-purifying respirator used in healthcare settings. The document is applicable to powered air-purifying respiratory protection devices that are working in medical working environment or other environment where the risk of exposure to pathogenic microorganism aerosols is assessed, used to filter microbial particles in the air and block pollutants such as droplets and blood. This document does not apply to powered air-purifying respirator for protection against toxic and hazardous gases. It is also not suitable for respirators for industrial dust, combustion, explosion, oxygen-deficient environments and escape.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 2410-2008, Determination of the luminous transmittance and haze of transparent plastics GB 2626-2019, Respiratory protection -- Non-powered air-purifying particle respirator GB/T 3785.1-2010, Electroacoustics -- Sound level meters -- Part 1.Specifications GB 9706.1, Medical electrical equipment -- Part 1.General requirements for basic safety and essential performance GB/T 12903-2008, Personal protective equipment terminology GB/T 14233.1, Test methods for infusion, transfusion, injection equipment for medical use -- Part 1.Chemical analysis methods GB/T 14710-2009, Environmental requirement and test methods for medical electrical equipment GB/T 15508-1995, Acoustics. Speech articulation testing method GB/T 16886.10, Biological evaluation of medical devices -- Part 10.Tests for irritation and skin sensitization3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply. 3.1 powered air-purifying respirator; PAPR A filter-type respiratory protective equipment that relies on a powered flow rate system (3.3) to provide airflow to overcome component resistance. 3.5 loose-fitting respirator with respiratory interfaces covering the head A partially tight powered air-purifying respirator (3.1) that covers the entire head to the neck. 3.6 tight-fitting respirator with respiratory interfaces covering the head A powered air-purifying respirator (3.1) that covers the entire head to the neck and has a close-fitting design at the neck. 3.7 air exhaust port A component that is installed on the hood (mask) and exhausts the air inside it.4 Classification and tagsThe powered air-purifying respirator used in healthcare settings specified in this document consists of at least a powered flow rate system, a filter element, an air supply tube, and a hood (or mask).5 Requirements5.1 Basic requirements Product materials and structural design shall meet the following requirements. 5.2 Primary skin irritation For materials that come into direct contact with the head, face or neck, skin irritation shall be evaluated in accordance with GB/T 16886.10.The primary skin irritation index shall not be greater than 0.4. 5.3 Filter element 5.4.2 If the flow rate is monitored and displayed in real time, the indication error shall not exceed ±5%. 5.5 Continuous use time Under the maximum flow rate conditions designed by the manufacturer, the continuous use time shall not be less than 4 h. 5.6 Anti-crushing of air supply tube When a pressure of 50N is applied, the flow rate of the respirator shall not drop by more than 5%. After the pressure is removed for 5 min, the air supply tube shall not be deformed. 5.7 Prompt function 5.7.1 Prompt for low flow rate The product shall have a low flow rate prompt function and meet the following requirements. 5.7.2 Prompt for low battery The product shall have a low battery prompt function and meet the following requirements. 5.8 Total inward leakage The total inward leakage under each action shall meet the requirements of Table 2. 5.24 Electrical safety and electromagnetic compatibility 5.24.1 Electrical safety shall comply with the requirements of GB 9706.1. 5.24.2 Electromagnetic compatibility shall comply with the requirements of YY 9706.102.6 Test methods6.1 Test conditions Unless otherwise specified, the test shall be carried out in an environment with a temperature of 16℃~32℃ and a relative humidity of (50±30)%. 6.5 Environment test The environment test of the powered flow rate system is carried out in accordance with the climate environment group II and mechanical environment group II in GB/T 14710- 2009, see Table 5. 6.6 Pretreatment conditions According to the storage conditions claimed by the manufacturer, place it at the lowest temperature and lowest humidity for (72±1) h. Then place it at normal room temperature for at least 4 h. 6.7.2 Mechanical strength Take at least 4 filter elements and perform mechanical strength pretreatment on the filter elements according to the method in 6.2.2 of GB 2626-2019. 6.7.3 Filtration efficiency 6.7.3.3 Testing methods Carry out the loading test under the minimum flow rate conditions specified in 5.4.1. The total aerosol loading shall be at least (200 ± 5) mg. 6.8.3 Test methods Before testing, make sure the battery is fully charged. You can run the fan for a while until the flow rate is lower than the minimum flow rate requirement, and then charge the battery according to the manufacturer's recommendations. 6.12 Total inward leakage 6.12.1 Sample preparation At least 2 sets of respirator samples shall be pre-conditioned according to the requirements of 6.6. 6.12.2 Test methods The subjects shall wear the respirator correctly. The tight-fitting respirator shall ensure the edges are close-fitting. Adjust to the lowest flow rate level. Test the total inward leakage according to the method specified in YY/T 0866 (except for the pretreatment method). The head sampling pipeline layout is shown in Figure 3.7 Marks and instructions for use7.1 Marks 7.1.1 Hood (face mask) The hood (face mask) product shall at least contain the category mark (cL, dL or dT). Reusable hoods (face masks) shall be able to ensure that the category mark is clearly identifiable after the maximum number of disinfections according to the disinfection method specified by the manufacturer. The smallest package shall have clear Chinese marks, including at least the following information. 7.1.3 Filter elements The smallest package shall have clear Chinese marks, including at least the following information. 7.2 Instructions for use The instructions for use shall contain at least the following information.8 Packaging and storage8.1 The packaging shall be strong enough to prevent damage to the product during transportation and storage. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of YY 1881-2023 be delivered?Answer: The full copy PDF of English version of YY 1881-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of YY 1881-2023_English with my colleagues?Answer: Yes. The purchased PDF of YY 1881-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YY 1881-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of YY 1881-2023?A step-by-step guide to download PDF of YY 1881-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "YY 1881-2023". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
