YS/T 967-2014 PDF EnglishUS$110.00 · In stock · Download in 9 seconds
YS/T 967-2014: Battery grade lithium dihydrogen phosphate Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsYS/T 967-2014: Battery grade lithium dihydrogen phosphate---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YST967-2014YS NONFERROUS METAL INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.150.99 H 64 YS/T 967-2014 Battery grade lithium dihydrogen phosphate ISSUED ON: OCTOBER 14, 2014 IMPLEMENTED ON: APRIL 01, 2015 Issued by: Ministry of Industry and Information Technology of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Requirements ... 4 4 Inspection methods ... 5 5 Inspection rules ... 5 6 Marking, packaging, transportation, storage, and quality certificate ... 7 7 Contract (or order form) content ... 8 Battery grade lithium dihydrogen phosphate1 ScopeThis Standard specifies the requirements, test methods, inspection rules and marking, packaging, transportation, storage, quality certificate and order form (or contract) content of battery grade lithium dihydrogen phosphate. This Standard applies to battery grade lithium dihydrogen phosphate produced by the neutralization method using lithium carbonate or lithium hydroxide monohydrate as raw materials.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 191-2008 Packaging - Pictorial marking for handling of goods GB/T 6284 Chemical products for industrial use - General method for determination of water content - The loss of mass on drying method GB/T 6678-2003 General principles for sampling chemical products GB/T 9724 Chemical reagent - General rule for the determination of pH3 Requirements3.1 Product classification The products are divided into two designations according to their chemical composition: LiH2PO4-1 and LiH2PO4-2. 3.2 Chemical composition The chemical composition of battery grade lithium dihydrogen phosphate products shall comply with the requirements in Table 1. 5.5.2 If the moisture inspection result of a product fails, double samples will be taken from the same batch of products, and the unqualified items will be repeatedly inspected. If there is still one unqualified inspection result, the batch of products will be determined as unqualified. 5.5.3 If the product pH is unqualified, double samples will be taken from the same batch of products, and the unqualified items will be repeatedly inspected. If there is still one unqualified inspection result, the batch of products will be determined as unqualified. 5.5.4 If the appearance quality of a product is unqualified, double samples will be taken from the same batch of products, and the unqualified items will be repeatedly inspected. If there is still one unqualified inspection result, the batch of products will be determined as unqualified.6 Marking, packaging, transportation, storage, and qualitycertificate 6.1 Marking The product packaging bag shall be marked with: product name, batch number, net weight, main content, supply party’s name, implemented standards, place of origin, “KEEP DRY” marking in GB/T 191-2008, etc. 6.2 Packaging The products are packed by double-layer packaging, with plastic film bags inside and plastic woven bags outside, or with plastic laminated bags. The inner bag is zipped or heat-sealed, and the outer bag is seamed firmly. The net weight of each bag is based on customer requirements. 6.3 Transportation When transporting the product, avoid contact with acids and alkalis, prevent the packaging bag from being damaged during transportation, and pay attention to moisture-proofing. 6.4 Storage The product shall be stored in a dry, acid-free and alkali-free atmosphere. The expiration date should not exceed half a year. 6.5 Quality certificate Each batch of products shall be accompanied by a quality certificate stating: a) supply party’s name, address, telephone number, and fax number; ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of YS/T 967-2014 be delivered?Answer: The full copy PDF of English version of YS/T 967-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of YS/T 967-2014_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 967-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YS/T 967-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of YS/T 967-2014?A step-by-step guide to download PDF of YS/T 967-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "YS/T 967-2014". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
