YS/T 751-2024 (YS/T 751-2011) PDF EnglishUS$90.00 · In stock · Download in 9 seconds
YS/T 751-2011: Designation and composition of tantalum and tantalum alloy Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Obsolete YS/T 751: Historical versions
Similar standardsYS/T 751-2011: Designation and composition of tantalum and tantalum alloy---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YST751-2011YS NONFERROUS METAL INDUSTRY STANDARD ICS 77.120 H 63 Designation and composition of tantalum and tantalum alloy Issued on: DECEMBER 20, 2011 Implemented on: JULY 1, 2012 Issued by. Ministry of Industry and Information Technology of the People’s Republic of China Table of ContentsForeword... 3 1 Scope... 4 2 Normative References... 4 3 Requirements... 4 4 Chemical composition analysis... 5ForewordThis Standard shall be under the jurisdiction of Technical 243 on Nonferrous Metals of Standardization Administration of China (SAC/TC 243). The drafting organizations of this Standard. Western Metal Materials Co., Ltd., Xi’an Noble Rare Metal Materials Co., Ltd., Northwest Institute for Nonferrous Metal Research. The main drafters of this Standard. Yi Nan, Zhang Luqiang, Wu Yu, Han Jiqing, Ai Jianling, Zhao Honglei, Tang Jin. Designation and composition of tantalum and tantalum alloy1 ScopeThis Standard specifies the designation and chemical composition requirements, sampling and chemical composition analysis for wrought tantalum and tantalum alloy products. This Standard applies to all types of wrought tantalum and tantalum alloy products (including cast ingots, sintering blanks, semi-finished products and finished products).2 Normative ReferencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition dated applies to this document. For undated references, the latest edition of the referenced documents (including all amendments) applies to This Standard. GB/T 15076 (all parts), Methods for chemical analysis of tantalum and niobium3 Requirements3.1 Designations and chemical compositions The designations and chemical compositions of wrought tantalum and tantalum alloy products shall be as specified in Table 1. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. |
