Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

YS/T 575.5-2007 PDF English

US$100.00 · In stock · Download in 9 seconds
YS/T 575.5-2007: Methods for chemical analysis of bauxite. Part 5: Determination of iron oxide content. Orthophenanthroline photometric method
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

YS/T 575.5: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
YS/T 575.5-2007100 Add to Cart Auto, 9 seconds. Methods for chemical analysis of bauxite. Part 5: Determination of iron oxide content. Orthophenanthroline photometric method Valid
YS/T 575.5-2006199 Add to Cart 2 days Methods for chemical analysis of bauxite. Determination of iron oxide content. Orthophenanthroline photometric method Obsolete

Similar standards

GB/T 8719   YB/T 042   YS/T 575.7   

YS/T 575.5-2007: Methods for chemical analysis of bauxite. Part 5: Determination of iron oxide content. Orthophenanthroline photometric method


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YST575.5-2007
NON-FERROUS METAL INDUSTRY STANDARD ICS 71.100.10 Q 52 Replacing YS/T 575.5-2006 Methods for Chemical Analysis of Bauxite - Part 5.Determination of Iron Oxide Content - Orthophenanthroline Photometric Method Issued on. NOVEMBER 14, 2007 Implemented on. MAY 01, 2008 Issued by. National Development and Reform Commission

Table of Contents

Foreword... 3 1 Scope... 6 2 Method Principle... 6 3 Reagents... 6 4 Apparatus... 7 5 Specimen... 7 6 Analytical Procedures... 7 7 Calculation of Analysis Results... 8 8 Precision... 8 9 Quality Assurance and Control... 9

Foreword

YS/T 575-2007 Methods for Chemical Analysis of Bauxite is a modification to YS/T 575-2006 (formerly GB/T 3257-1999). It has 24 parts in total. --- Part 1.Determination of aluminum oxide content - EDTA titrimetric method; --- Part 2.Determination of silicon dioxide content - Gravimetric-molybdenum blue photometric method; --- Part 3.Determination of silicon dioxide content - Molybdenum blue photometric method; --- Part 4.Determination of iron oxide content - Potassium titrimetric method; --- Part 5.Determination of iron oxide content - Orthophenanthroline photometric method; --- Part 6.Determination of titanium dioxide content - Diantipyrylmethane photometric method; --- Part 7.Determination of calcium oxide content - Flame atomic absorption spectrophotometric method; --- Part 8.Determination of magnesium oxide content - Flame atomic absorption spectrophotometric method; --- Part 9.Determination of potassium oxide, sodium oxide content - Flame atomic absorption spectrophotometric method; --- Part 10.Determination of manganese oxide content - Flame atomic absorption spectrophotometric method; --- Part 11.Determination of chromium oxide content - Flame atomic absorption spectrophotometric method; --- Part 12.Determination of vanadium pentoxide content - N-benzoyl-N- phenylhydroxylamine photometric method; --- Part 13.Determination of zinc content - Flame atomic absorption spectrophotometric method; --- Part 14.Determination the total content of rare earth oxide Tribromo-arsenazo photometric method; --- Part 15.Determination of gallium oxide content - Rhodamine B-extraction photometric method; --- Part 16.Determination of phosphorus pentoxide content - Molybdenum blue spectrophotometric method; --- Part 17.Determination of sulfur content - Direct combustion-iodometric method; --- Part 18.Determination of total carbon content - Non-aqueous titrimetric method after combustion; --- Part 19.Determination of the loss on ignition - Gravimetric method; --- Part 20.Preparation of pre-dried sample; --- Part 21.Determination of organic carbon content titrimetric method; --- Part 22.Determination of hydroscopic moisture in analytical samples - Gravimetric method; --- Part 23.Determination of element contents X-ray fluorescence spectrometric method; --- Part 24.Determination of carbon content and sulfur content - Infrared absorption method. This Part is Part 5. This Part replaces YS/T 575.5-2006 (formerly GB/T 3257.5-1999). This Part revises YS/T 575.5-2006.Compared with YS/T 575.5-2006, this Part has the major changes as follows. --- Change the concentrations of orthophenanthroline solution and hydroxylamine hydrochloride solution; --- Supplement the provisions of color-development temperature and time; --- Unify the drying temperature of the specimen to be 110°C±5°C; --- Add the precision. This Part was proposed by and under the jurisdiction of National Technical Committee on Non-ferrous Metals of Standardization Administration of China. Chief drafting organization of this Part. China Aluminum Corporation Zhengzhou Research Institute. Drafting organization of this Part. China Aluminum Corporation Guizhou Branch. Chief drafting staffs of this Part. Wang Baosheng, and Li Xiong. This Part shall be interpreted by National Technical Committee on Non-ferrous Metals of Standardization Administration of China. The historical edition replaced by this Standard is as follows. --- YS/T 575.5-2006 (formerly GB/T 3257.5-1999). Methods for Chemical Analysis of Bauxite - Part 5.Determination of Iron Oxide Content - Orthophenanthroline Photometric Method

1 Scope

This Part specifies the determination of ferric oxide content in the bauxite. This Part is applicable to the determination of ferric oxide content in the bauxite; the determination range. ≤5.00%.

2 Method Principle

The specimen is melted by alkali, leached by hydrochloric acid; and the ferric iron is reduced to ferrous iron with hydroxylamine hydrochloride under appropriate acidity. In an acetate buffer medium, ferrous iron and orthophenanthroline form a colored complex. The absorbance is measured at a wavelength of 510 nm.

3 Reagents

3.1 Sodium hydroxide. 3.2 Hydrochloric acid (1+1). 3.3 hydroxylamine hydrochloride solution (5%). 3.4 orthophenanthroline solution (0.5%). 3.7 Ferric oxide standard storage solution Take 0.5000g of ferric oxide (99.99%), which was previously burned at 600°C for 2h, into a 250mL beaker; add a little water to moisten; and add 40mL of hydrochloric acid (3.2) along the cup wall. Cover the dish; heat until completely dissolved; and cool. Transfer to a 1000 mL volumetric flask; wash the beaker with water; and dilute to the scale with water; mix well. 1mL of this solution contained 0.5mg of ferric oxide.

4 Apparatus

Spectrophotometer.

5 Specimen

Grind the specimen by a mortar and pass through a 74µm sieve; dry the ground specimen at 110°C±5°C for 2h;

6 Analytical Procedures

6.1 Specimen Take 0.25g of specimen (5); accurate to 0.0001g. 6.2 Measurement times The same specimen shall be measured for twice; and take their average value. 6.3 Blank test Take the blank test with the specimen. 6.4 Measurement 6.5 Drawing of working curve Separately take 0.00mL, 0.50mL, 1.00mL, 2.00mL, 3.00mL, 4.00mL, 5.00mL, 6.00mL of ferric oxide standard solution (3.8) into a group of 100mL volumetric flasks. Operate by following the analysis procedure 6.4.1.Take the reagent blank as the reference; measure its absorbance. Draw working curve by taking the amount of ferric oxide as the abscissa, and absorbance as the ordinate.

7 Calculation of Analysis Results

Calculate the mass fraction (%) of ferric oxide as per the following Formula.

8 Precision

8.1 Repeatability Measured values of two independent test results are obtained under repeatable conditions. Within the range of average values given below, the absolute values of these two test results do not exceed the repeatability limit (r). 8.2 Tolerance The difference between laboratory analysis results shall not be greater than the tolerances listed in Table 1.

9 Quality Assurance and Control

In analysis, use standard sample or control sample to verify. Or, use standard sample or control sample to verify the analysis method at least once a year. When the process is out of control, it shall find out the reason. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of YS/T 575.5-2007 be delivered?Answer: The full copy PDF of English version of YS/T 575.5-2007 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of YS/T 575.5-2007_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 575.5-2007_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YS/T 575.5-2007 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version YS/T 575.5-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 575.5-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of YS/T 575.5-2007?

A step-by-step guide to download PDF of YS/T 575.5-2007_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YS/T 575.5-2007".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9