Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

YC/T 246-2008 PDF English

US$110.00 · In stock · Download in 9 seconds
YC/T 246-2008: Tobacco and tobacco products. Determination of nicotine. Gas chromatographic method
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
YC/T 246-2008110 Add to Cart Auto, 9 seconds. Tobacco and tobacco products. Determination of nicotine. Gas chromatographic method Valid

Similar standards

GB 5606.2   GB/T 5606.1   YC/T 242   

YC/T 246-2008: Tobacco and tobacco products. Determination of nicotine. Gas chromatographic method


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YCT246-2008
TOBACCO INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 65.160 X 87 Record number: 23585-2008 Tobacco and tobacco products - Determination of nicotine - Gas chromatographic method ISSUED ON: APRIL 14, 2008 IMPLEMENTED ON: APRIL 14, 2008 Issued by: China Tobacco

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Principle ... 4 4 Reagents and materials ... 4 5 Instruments ... 6 6 Analysis steps ... 6 7 Calculation and expression of results ... 8 8 Recovery and detection limit ... 8 9 Test report ... 8 Appendix A (Informative) Example of chromatogram ... 9 Tobacco and tobacco products - Determination of nicotine - Gas chromatographic method

1 Scope

This Standard specifies the gas chromatographic method for determination of nicotine in tobacco and tobacco products. This Standard applies to the determination of nicotine in tobacco and tobacco products. This Standard applies to samples whose nicotine content is 8 mg/g ~ 41 mg/g (dry basis).

2 Normative references

The terms in the following documents become the terms of this Standard by reference to this Standard. For dated references, all subsequent amendments (not including errata content) or revisions do not apply to this standard. However, parties to agreements that are based on this Standard are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this Standard. GB/T 5606.1, Cigarettes - Sampling GB/T 19616, Tobacco - Sampling of batches of raw material - General principles (GB/T 19616-2004, ISO 4874:2000, MOD) YC/T 31, Tobacco and tobacco products - Preparation of test sample and determination of water content - Oven method

3 Principle

Use an organic solvent to extract the nicotine in the sample; use a gas chromatograph that is equipped with a flame ionization detector to perform the determination; use the internal standard method to quantify.

4 Reagents and materials

4.1 Except for special requirements, analytical reagents shall be used. flasks respectively; use the extraction solution (4.12) to dilute the volume to the mark, to obtain different concentrations of nicotine working standard solutions; the concentration range shall cover the concentration of nicotine that is expected to be detected in the sample.

5 Instruments

5.1 Volumetric flasks, 50 mL, 100 mL, 250 mL. 5.2 Triangular flasks, 100 mL, 250 mL, with stopper. 5.3 Oscillator. 5.4 Gas chromatograph: it is equipped with a flame ionization detector.

6 Analysis steps

6.1 Sampling Cigarette samples are sampled according to GB/T 5606.1. Tobacco leaf samples are sampled according to GB/T 19616. 6.2 Sample preparation Prepare samples and measure the moisture content according to YC/T 31. 6.3 Extraction 6.3.1 Methyl-tert-butyl ether method Accurately weigh (1.000 ± 0.020) g of sample in a triangular flask (5.2); use a 10 mL polytetrafluoroethylene pipette to transfer 7 mL of sodium hydroxide solution (4.5) into the extraction bottle; gently shake the extraction bottle; wet test sample; let stand for 15 min. Then, add 50 mL of extraction solution (4.11); seal with lid and place on the oscillator (5.3); shake and extract for 2 h. Let stand to separate the sample from the extractant (up to 24 h); take the supernatant for analysis. 6.3.2 N-hexane method Accurately weigh 1 g ~ 2 g of sample, accurate to 0.001 g; put it in a 100 mL triangular flask (5.2); add 20 mL of water, 40 mL of extraction solution (4.12) and 10 mL of sodium hydroxide solution (4.6); put it on the oscillator (5.3); shake and extract for 60 min. After standing, take the upper organic phase and immediately analyze by gas chromatography. The extraction bottle can also be placed in an ultrasonic water bath to facilitate the separation of the two phases. 6.4 Determination 6.4.1 Instrument preparation Set up and operate the gas chromatograph (5.4) according to the operating instructions. Ensure that the solvent peak, internal standard peak, and nicotine peak are completely separated. The analysis conditions of the following gas chromatograph can be used for reference; the applicability of other conditions, if adopted, shall be verified. See Appendix A for the chromatogram of the sample extract. 6.4.2 Chromatographic conditions (methyl-tert-butyl ether method) Chromatographic column: a capillary column whose column length is 30 m and inner diameter is 0.32 mm or 0.25 mm; stationary phase: 5% phenyl-methyl polysiloxane. Carrier gas: helium; inlet temperature: 250 °C; detector temperature: 250 °C; sampling method: split sampling; split ratio: 40:1; injection volume: 1.0 μL; column flow rate: 1.7 mL/min. Adopt temperature programming method: -- Initial temperature: 110 °C; initial time: 0 min; -- Temperature programming 1: increase from 110 °C to 185 °C at a rate of 10 °C/min; -- Temperature programming 2: increase from 185 °C to 245 °C at a rate of 6 °C/min; keep for 10 min; -- Total running time: 27.5 min. 6.4.3 Chromatographic conditions (n-hexane method) Chromatographic column: a capillary column whose column length is 15 m and inner diameter is 0.53 mm; stationary phase: 50% phenyl-methyl polysiloxane. Carrier gas: helium or hydrogen; inlet temperature: 270 °C; detector temperature: 270 °C; sampling method: split sampling; split ratio: 10:1; injection volume: 1.0 μL; column flow rate: 7 mL/min; Adopt isothermal mode; column temperature: 170 °C; total running time: 10 min. 6.4.4 Preparation of the standard curve ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of YC/T 246-2008 be delivered?Answer: The full copy PDF of English version of YC/T 246-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of YC/T 246-2008_English with my colleagues?Answer: Yes. The purchased PDF of YC/T 246-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YC/T 246-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of YC/T 246-2008?

A step-by-step guide to download PDF of YC/T 246-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YC/T 246-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9