Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

SJ/T 11794-2022 PDF English

US$145.00 · In stock · Download in 9 seconds
SJ/T 11794-2022: Test method for unbonded lithium of cathode materials used in lithium ion battery
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
SJ/T 11794-2022145 Add to Cart Auto, 9 seconds. Test method for unbonded lithium of cathode materials used in lithium ion battery Valid

Similar standards

GB/T 11446.8   GB/T 11446.9   SJ/T 11802   

SJ/T 11794-2022: Test method for unbonded lithium of cathode materials used in lithium ion battery


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/SJT11794-2022
SJ ELECTRONIC INDUSTRY STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA ICS 31.030 CCS L 90 SJ/T 11794-2022 Test method for unbonded lithium of cathode materials used in lithium ion battery ISSUED ON: MARCH 24, 2022 IMPLEMENTED ON: JULY 01, 2022 Issued by: Ministry of Industry and Information Technology of the People’s Republic of China.

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 4 4 Principle of the method ... 5 5 Instruments, equipment, and materials ... 5 6 Sample processing and determination ... 6 7 Calculation of results ... 6 8 Test report ... 8 Test method for unbonded lithium of cathode materials used in lithium ion battery

1 Scope

This document specifies the test method for the content of unbonded lithium of cathode materials used in lithium ion batteries. This document applies to the determination of the content of unbonded lithium in cathode materials such as lithium nickel cobalt manganate, lithium nickel cobalt aluminate, lithium cobalt oxide, lithium manganate, lithium nickel manganate, and lithium-rich manganese base. The determination of the content of unbonded lithium in other cathode materials can also refer to this document.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 6682 Water for analytical laboratory use - Specification and test methods

3 Terms and definitions

For the purpose of this document, the following terms and definitions apply. 3.1 residual alkali Lithium hydroxide and lithium carbonate attached to the surface of cathode materials. 3.2 unbonded lithium Lithium in residual alkali.

4 Principle of the method

Dissolve lithium carbonate and lithium hydroxide in the sample in distilled water, and then filter. When using dilute hydrochloric acid solution as the titration solution to perform automatic potentiometric titration on the filtrate, the following reactions will occur: LiOH + HCl = LiCl + H2O Li2CO3 + HCl = LiHCO3 + LiCl With the continuous addition of dilute hydrochloric acid solution, all lithium hydroxide will be converted into lithium chloride and water, and all lithium carbonate will be converted into lithium bicarbonate and lithium chloride. At this time, the pH value is about 8.0 ~ 9.0, and an electrode potential jump point EP1 will appear on the automatic potentiometric titrator. The dilute hydrochloric acid solution is continued to be added dropwise, the following reaction will occur: LiHCO3 + HCl = LiCl + CO2↑ + H2O Lithium bicarbonate will all be converted into lithium chloride, carbon dioxide, and water. At this time, the pH value is about 4.0 ~ 5.0, and another electrode potential jump point EP2 will appear on the automatic potentiometric titrator. By recording the consumption of dilute hydrochloric acid corresponding to the potential jump points EP1 and EP2, the contents of lithium carbonate and lithium hydroxide in the sample can be calculated, and then the total content of unbonded lithium can be calculated based on the mass fraction of lithium in lithium carbonate and lithium hydroxide.

5 Instruments, equipment, and materials

5.1 Automatic potentiometric titrator. The titration accuracy is not less than 20 μL. 5.2 Magnetic stirrer. The rotation speed is adjustable from 0 r/min to 1000 r/min. 5.3 Balance. The accuracy is not less than 0.0001 g. 5.4 Distilled water. Distilled water is obtained by heating, boiling, and cooling the grade 3 water that meets the requirements of GB/T 6682. Distilled water shall be covered and stored for later use. The validity period is 72 h. 5.5 Hydrochloric acid standard solution. 0.1 mol/L or 0.5 mol/L or l mol/L. 5.6 Hydrochloric acid titration solution. According to the estimated content of unbonded lithium in the sample, select a hydrochloric acid standard solution of appropriate concentration. Use a pipette to accurately transfer an appropriate amount of the hydrochloric acid standard solution into a volumetric flask, add distilled water to ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of SJ/T 11794-2022 be delivered?Answer: The full copy PDF of English version of SJ/T 11794-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of SJ/T 11794-2022_English with my colleagues?Answer: Yes. The purchased PDF of SJ/T 11794-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- SJ/T 11794-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of SJ/T 11794-2022?

A step-by-step guide to download PDF of SJ/T 11794-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "SJ/T 11794-2022".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9