QB/T 1684-2015 PDF EnglishUS$130.00 · In stock · Download in 9 seconds
QB/T 1684-2015: Inspecting rules for cosmetics Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid QB/T 1684: Historical versions
QB/T 1684-2015: Inspecting rules for cosmetics---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QBT1684-2015QB LIGHT INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 71.100.70 Calssification No.: Y42 Filing No. 51110-2015 Replacing QB/T 1684-2006 Inspecting rules for cosmetics ISSUED ON: JULY 14, 2015 IMPLEMENTED ON: JANUARY 01, 2016 Issued by: Ministry of Industry and Information Technology of PRC Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 4 4 Inspection classification ... 6 5 Group-batching rules and sampling schemes ... 7 6 Sampling method ... 8 7 Judgment and reinspection rules ... 8 8 Transfer rules ... 9 9 Suspension and resumption... 9 Inspecting rules for cosmetics1 ScopeThis standard specifies the terms and definitions, inspection classification, group-batching rules and sampling schemes, sampling methods, judgment and re-inspection rules, transfer rules, suspension and resumption of cosmetics inspection. This standard is applicable to the test for type approval, exit-factory inspection, type test of various types of classic cosmetics (hereinafter referred to as "products").2 Normative referencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) is applicable to this standard. GB/T 2828.1-2012 Sampling procedures for inspection by attributes -Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 8051 Sequential sampling procedures and tables for inspection by attributes QB/T 1685 Requirements of packaging appearance for cosmetic products3 Terms and definitionsThe terms and definitions as defined in GB/T 2828.1-2012 as well as the following terms and definition apply to this document. 3.1 Reliability test The general term for tests conducted to understand, analyze, improve and evaluate the various performances of products in terms of design, materials and processes, and to improve the integrity of products. Note: The reliability test items are determined by the company according to the colonies in the physical and chemical indicators hygienic indicators, as well as other hygienic indicators other than mold and yeast. 3.7 Item The single piece product, in the basic unit of bottle, piece, bag, box, etc. 3.8 Proper disposal The selection process of removing individual product which fails to comply with the packing appearance requirements from the entire batch of products, under the premise of not damaging the sales package.4 Inspection classification4.1 Test for product approval The product will be inspected after the completion of the design. If the product's performance is safe and reliable, it does not need inspection anymore. 4.2 Factory test for release 4.2.1 It shall be inspected batch by batch by the inspection personal of the manufacturing enterprise according to the requirements of product standards before leaving factory. Those complying with standard are allowed to exit factory. 4.2.2 The factory test items for release are items of routine inspection. 4.3 Type test 4.3.1 The product of the same formula shall be subject to at least one type test every 12 months. Type test shall also be carried out in one of the following conditions: a) When the raw materials, processes, formulas are subject to major changes; b) When it is first put into production or the production is restored after suspension for more than 6 months; c) When the production site changes; d) When the competent authority proposes the type test requirements 5.2.3 The destructive inspection items such as non-smooth jetting adopt the special inspection level S-3 in GB/T 2828.1-2012 and the one-time sampling scheme which has an acceptance quality limit (AQL) of disqualified percentage of 2.5. In order to reduce the sample size and inspection cost, it may also use the sampling scheme in GB/T 8051 as an alternative. However, the sampling scheme in GB/T 2828.1-2012 is the arbitration scheme.6 Sampling method6.1 For the samples for the inspection of sensory, physical and chemical indicators, net content, hygiene indicators, it shall be the unit from the batch which is sufficient for the use of inspection of various indicators and retention. Meanwhile it shall be tagged indicating the production date and warranty period or the product batch number and limited date of use, sampling date, sampling personal. 6.2 The samples for packaging appearance inspection shall the unit taken by the method which is representative of the batch quality. When the inspection batch is composed of several layers, it shall use the layered method to take the unit; put the intact unit after inspection back to the original batch. 6.3 During the type test, it may randomly take 2 ~ 4 pcs of units from any batch of products for the items of non-routine inspection, inspect them according to the methods as specified in the product standard. 6.4 During the type test, the item of routine inspection shall, based on the results of factory inspection for release, perform the type test for the retained sample. It does not take sample repeatedly.7 Judgment and reinspection rules7.1 The inspection result of sensory, physical and chemical indicators, net ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of QB/T 1684-2015 be delivered?Answer: The full copy PDF of English version of QB/T 1684-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of QB/T 1684-2015_English with my colleagues?Answer: Yes. The purchased PDF of QB/T 1684-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- QB/T 1684-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version QB/T 1684-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version QB/T 1684-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of QB/T 1684-2015?A step-by-step guide to download PDF of QB/T 1684-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "QB/T 1684-2015". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
