GB/T 6343-2009 PDF EnglishUS$80.00 · In stock · Download in 9 seconds
GB/T 6343-2009: Cellular plastics and rubbers -- Determination of apparent density Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 6343: Historical versions
Similar standardsGB/T 6343-2009: Cellular plastics and rubbers -- Determination of apparent density---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT6343-2009GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 83.100 G 32 GB/T 6343-2009 / ISO 845:2006 Replacing GB/T 6343-1995 Cellular Plastics and Rubbers - Determination of Apparent Density (ISO 845:2006, IDT) ISSUED ON: MAY 4, 2009 IMPLEMENTED ON: NOVEMBER 1, 2009 Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative References ... 4 3 Terms and Definitions ... 4 4 Apparatus ... 5 5 Test Specimens ... 5 6 Procedure ... 6 7 Expression of Results ... 6 8 Accuracy ... 7 9 Test Report ... 7ForewordThis standard is identical to “Cellular Plastics and Rubbers - Determination of Apparent Density” (ISO 845:2006), and its technical contents and text structure are identical to those of the latter. This standard supersedes “Cellular Plastics and Rubbers - Determination of Apparent (Bulk) Density” (GB/T 6343-1995). Compared with GB/T 6343-1995, the main changes in this standard are as follows: - The standard name is revised as “Cellular Plastics and Rubbers - Determination of Apparent Density”; - The definition of volume density is deleted; - The measuring error of balance is changed to 0.1% from 0.5% (Chapter 4 of this edition); The specimen number is unified as 5 pieces; the special requirements of soft and semi-rigid material in the former standard are deleted; the description of “5.3 Conditioning” is modified (Chapter 5 in this edition); - The number of dimension measuring points is specified (Chapter 6 in this edition); - The application scope of “Formula (2)” is modified, the former closed-cell materials less than 30kg/m3 is changed to those less than 15kg/m3 (Chapter 7 in this edition); - The expression of accuracy is added (Chapter 8 in this edition); - The contents of test report are added. This standard is proposed by China National Light Industry Council. This standard shall be under the jurisdiction of National Technical Committee on Plastic Products of Standardization Administration of China. Drafting organizations of this standard: Beijing Technology and Business University and China National Center for Quality Supervision & Test of Plastic Products (Beijing). Chief drafting staff of this standard: Jin Wei and Chen Qian. The previous edition of the standard superseded by this standard is as follows: - GB/T 6343-1995. Cellular Plastics and Rubbers - Determination of Apparent Density1 ScopeThis standard specifies a method for determining the apparent overall density and the apparent core density of cellular plastics and rubbers. If the material to be tested includes skins formed during a molding/extrusion, the apparent overall density or the apparent core density, or both, can be determined. If the material does not have skins formed during molding, the term "overall density" is not applicable. For shaped materials, a different method such as buoyancy method may be used.2 Normative ReferencesThe following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies. GB/T 2918-1998 Plastics - Standard Atmospheres for Conditioning and Testing (idt ISO 291:1997) GB/T 6342-1996 Cellular plastics and rubbers - Determination of linear dimensions (idt ISO 1923: 1981)3 Terms and DefinitionsFor the purposes of this document, the following terms and definitions apply. 3.1 Apparent overall density Mass per unit volume of a sample, including all skins formed during molding 3.2 Apparent core density Mass per unit sample after all skins formed during molding have been removed4 Apparatus4.1 Balance To an accuracy of 0.1%. 4.2 Measuring instruments In accordance with GB/T 6342-1996.5 Test Specimens5.1 Dimensions Each specimen shall be of a shape such that its volume can be easily calculated. It shall be cut without deforming the original cell structure of the material. The size of a specimen should preferably be as large as possible, commensurate with the apparatus available and with the shape of the original material. The total volume of a specimen shall be at least 100cm3. For rigid materials, when the apparent overall density is being determined using a specimen cut from a larger sample, the ratio of the area of skin formed during molding to the total volume shall be the same for the specimen as for the sample. 5.2 Number A minimum of 5 specimens shall be tested. The sample may be a manufactured object whose mass and volume can be measured accurately. Its total mass and total volume may be used to determine the sample density. 5.3 Conditioning 5.3.1 For measurement purposes, wait at least 72h after manufacture before cutting the specimens from product samples. If required, this period may be reduced to 48h or 16h if experience shows that, 48h or 16h after manufacture, the difference in density compared with the density 72h after manufacture is less than 10%. 5.3.2 The specimen shall be kept for at least 16h at standard atmospheres or in a desiccator (dry conditions) as defined below. This conditioning period may be part of the 72h period following manufacture. Chinese Standards This is an excerpt of the PDF (Some pages are marked off intentionally) Full-copy PDF can be purchased from 1 of 2 websites: 1. https://www.ChineseStandard.us SEARCH the standard ID, such as GB 4943.1-2022. Select your country (currency), for example: USA (USD); Germany (Euro). Full-copy of PDF (text-editable, true-PDF) can be downloaded in 9 seconds. Tax invoice can be downloaded in 9 seconds. Receiving emails in 9 seconds (with download links). SEARCH the standard ID, such as GB 4943.1-2022. Full-copy of PDF (text-editable, true-PDF) can be downloaded in 9 seconds. Receiving emails in 9 seconds (with PDFs attached, invoice and download links). Translated by: Field Test Asia Pte. Ltd. (Incorporated & taxed in Singapore. Tax ID: 201302277C) Linkin: https://www.linkedin.com/in/waynezhengwenrui/ ------ The End ------ ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 6343-2009 be delivered?Answer: The full copy PDF of English version of GB/T 6343-2009 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 6343-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6343-2009_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 6343-2009 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 6343-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6343-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 6343-2009?A step-by-step guide to download PDF of GB/T 6343-2009_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 6343-2009". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
