GB/T 6324.5-2008 PDF EnglishUS$90.00 · In stock · Download in 9 seconds
GB/T 6324.5-2008: Test method of organic chemical products -- Part 5: Determination of trace quantities of carbonyl compounds in organic chemicals Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 6324.5: Historical versions
Similar standardsGB/T 6324.5-2008: Test method of organic chemical products -- Part 5: Determination of trace quantities of carbonyl compounds in organic chemicals---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT6324.5-2008 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 71.080.01 G 15 Replacing GB/T 6324.5-1986, GB/T 6324.6-1986 Test method of organic chemical products – Part 5.Determination of trace quantities of carbonyl compounds in organic chemicals Issued on. JUNE 4, 2008 Implemented on. DECEMBER 1, 2008 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration Committee. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Safety and preventative measures... 6 4 Test method... 6 5 Expression of results... 10 Annex A (Informative) Comparison on clause number between this Part and ASTM E 411-2005... 12ForewordGB/T 6324 Test method of organic chemical products consists of six parts. - Part 1.Water miscibility test of liquid organic chemical products; - Part 2.Determination of dry residue after evaporation on a water bath for volatile organic liquids; - Part 3.Determination of permanganate-reducing substances; - Part 4.Determination of trace sulfur in organic liquid products - Microcoulometric method; - Part 5.Determination of trace quantities of carbonyl compounds in organic chemicals; - Part 6.Determination of color for liquids - Tristimulus colorimetry. This Part is the fifth part of GB/T 6324 and an integrated revision of GB/T 6324.5-1986 and GB/T 6324.6-1986. The revision of this Part adopts the Standard of American Society for Testing and Materials ASTM E 411-2005 Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine (English version). This Part was redrafted based on ASTM E 411-2005.Annex A lists the comparison on clause number between this Part and ASTM E 411-2005. Considering national conditions of China, this Part made some modifications when adopting ASTM E 411-2005.The main difference is as follows. - added determination of carbonyl compounds - volumetric method (4.2 of this Part), so as to cooperate with the change of the method determination range. This Part replaces GB/T 6324.5-1986 Organic chemical products for industrial use--Determination of content of carbonyl compounds present--Volumetric method and GB/T 6324.6-1986 Organic chemical products for industrial use-- Determination of content of carbonyl compounds present in small amounts-- Photometric method. Compared with GB/T 6324.5-1986 and GB/T 6324.6-1986, the main changes are as follows. - modified the name of this Part from “Organic chemical products for industrial use--Determination of content of carbonyl compounds present” to “Test method of organic chemical products - Part 5.Determination of trace quantities of carbonyl compounds in organic chemicals” (cover of Edition 1986, cover of this Edition); - made the corresponding changes for “Scope” (Clause 1 of Edition 1986, Clause 1 of this Edition); - added spectrophotometric method (see 4.2); - in the spectrophotometric method, it modified the standard substance from acetophenone to 2-butanone, test temperature from 50°C to room temperature, color development time from 5 min to 12 min, color development wavelength from 445 nm to 480 nm; modified “use ethanol to adjust the instrument zero point “ to “adjust the zero point of the spectrophotometer with water” (3.5 and Clause 5 of Edition 1986, 4.2.2.5 and 4.2.4 of this Edition); - in volumetric method, it added that when the endpoint color change is not obvious, it could use the potentiometric method to determine the end (see 4.3). Annex A of this Part is informative. This Part was proposed by China Petroleum and Chemical Industry Association. This Part shall be under the jurisdiction of Subcommittee on Organic, National Technical Committee on Chemical of Standardization Administration of China (SAC/TC 63 / SC 2). Main drafting organizations of this Part. Jinan IFT Science & Technology Co., Ltd., Shandong Chemical Research Institute. The drafting organization of this Part. China Petrochemical Corporation Jinzhou Petrochemical Company. Main drafter of this Part. Qiu Juan, Cui Aihong, Yu Pengling, Qi Xinyu, Li Debo. Versions of standard substituted by this Standard are. - GB/T 6324.5-1986, GB/T 6324.6-1986. Test method of organic chemical products – Part 5.Determination of trace quantities of carbonyl compounds in organic chemicals WARNING This Part does not address all safety issues related to the use of standards. It is user’s responsibility to take appropriate safety and protective measures and to ensure compliance with the relevant national regulations. See Clause 3 for information on safety and precautionary measures.1 ScopeThis Part specifies the test methods for determination of carbonyl compounds in organic chemical products. spectrophotometric method and volumetric method. This Part is applicable to the determination of carbonyl compounds in water- soluble and alcohol-soluble organic chemical products. The spectrophotometric method is applicable to the sample determination of which carbonyl compound mass fraction is less than or equal to 0.01%. The volumetric method is applicable to the sample determination of which carbonyl compound mass fraction is greater than 0.01%.2 Normative referencesThe following standards contain the provisions which, through reference in this Part, constitute the provisions of this Part. For dated references, subsequent amendments (excluding corrections) or revisions do not apply to this Part. However, the parties who enter into agreement based on this Part are encouraged to investigate whether the latest versions of these documents are applicable. For undated reference documents, the latest versions apply to this Part. GB/T 601-2002 Chemical Reagent - Preparations of Standard Volumetric Solutions GB/T 603-2002 Chemical Reagent - Preparations of Reagent Solution for Use in Test (ISO 6353-1.1982, NEQ) GB/T 6682-2008 Water for analytical laboratory use - Specification and test methods (eqv ISO 3696.1987)3 Safety and preventative measures3.1 Sampling safety shall be specified in the product standard according to product characteristics. 3.2 Methanol is flammable. It may be on fire in distillation. So it should take preventive measures. For example, inspect the flask for cracks; 3.3 2,4-dinitrophenylhydrazine is easy to explode. Open flame or electric spark can make it intense burning. Avoid heat sources during use.4 Test method4.1 General Unless otherwise stated, only reagents identified as analytically pure and grade 3 water as specified in GB/T 6682-2008 can be used in the analysis. 4.2 Spectrophotometric method 4.2.1 Methodology The carbonyl compounds in the sample react with 2,4-dinitrophenylhydrazine in acidic medium to generate 2,4-dinitrophenylhydrazone. 2,4- dinitrophenylhydrazone reacts with potassium hydroxide, resulting in significant red material. Measure the absorbance with a spectrophotometer at a wavelength of 480 nm to obtain carbonyl compound content. Equation. 4.2.2 Reagents and solutions 4.2.2.4 2,4-dinitrophenylhydrazine solution. 1 g/L 4.2.2.5 Carbonyl compound standard solution (in CO). 2.5 mg/mL Weigh 0.643 g of 2-butanone dissolved in about 50 mL of carbonyl-free methanol. Transfer it to a 100 mL volumetric flask. Use carbonyl-free methanol to dilute it to the scale. Shake it well. 4.2.3 Apparatus Spectrophotometer. with a cuvette of which the optical path is 1 cm; absorbance accuracy is ± 0.004 (A). 4.2.4 Analysis procedure 4.2.4.1 Standard curve drawing 4.2.4.2 Sample determination 4.2.4.2.1 Preparation of sample solution Pipet 2.0 mL of laboratory sample containing (0.5 ~ 50) μg of carbonyl in a pre- weighed 25 mL volumetric flask. Weigh it to the nearest of 0.0001 g. The difference between the two weighings shall be the mass of the laboratory sample. 4.2.5 Calculation of results The mass fraction w1 of carbonyl compound, in carbonyl (CO), values in %, shall be calculated according to equation (1). 4.3 Volumetric method 4.3.1 Methodology The carbonyl compound in the sample is reacted with hydroxylamine hydrochloride. The resulting acid shall be indicated in bromophenol blue. Use sodium hydroxide standard titration solution to titrate. Calculate the content of carbonyl compound. 4.3.2 Reagents and solutions 4.3.2.1 95% ethanol 4.3.3 Apparatus Micro-burette. 10 mL 4.3.4 Analysis procedures Weigh 50 mL of hydrochloric acid hydroxylamine solution and place it in a 250 mL iodometric flask used as standard color for titration.5 Expression of resultsTake the arithmetic mean of the results of two parallel determinations as the measurement result. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 6324.5-2008 be delivered?Answer: The full copy PDF of English version of GB/T 6324.5-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 6324.5-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6324.5-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 6324.5-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 6324.5-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6324.5-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 6324.5-2008?A step-by-step guide to download PDF of GB/T 6324.5-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 6324.5-2008". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
