GB/T 45174-2024 PDF EnglishUS$140.00 · In stock · Download in 9 seconds
GB/T 45174-2024: Footwear - Test method of density for microcellular soles Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 45174-2024: Footwear - Test method of density for microcellular soles---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT45174-2024GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 61.060 CCS Y 78 Footwear – Test Method of Density for Microcellular Soles Issued on: DECEMBER 31, 2024 Implemented on: JULY 1, 2025 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 4 2 Normative References... 4 3 Terms and Definitions... 4 4 Principle... 4 5 Equipment and Materials... 4 6 Specimen and Environmental Adjusting... 6 7 Test Procedures... 6 8 Test Results... 6 9 Test Report... 7ForewordThis Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for Standardization – Part 1.Rules for the Structure and Drafting of Standardizing Documents. Please note some contents of this Document may involve patents. The issuing agency of this Document shall not assume the responsibility to identify these patents. This Document was proposed by China National Light Industry Council. This Document shall be under the jurisdiction of National Technical Committee on Footwear of Standardization Administration of China (SAC/TC 305). Drafting organizations of this Document. Xuzhou C.banner Shoes Co., Ltd.; Wenzhou Technical Testing Research Institute for Quality; China Leather and Footwear Research Institute Co., Ltd.; Wenzhou Yihe Shoe Materials Co., Ltd.; Xuchuan Chemical (Suzhou) Co., Ltd.; Zhongqiao Sports Co., Ltd.; Gotech Testing Machines (Dongguan) Co., Ltd.; and Zhongqing Inspection and Certification Co., Ltd. Chief drafting staffs of this Document. Miao Jie, Zhang Ming, Meng Hongwei, Zhang Xiulong, Zhang Dahua, Zheng Zhuowu, Chen Yongdian, Liang Jiyu, Wang Ning, Chen Peipei, and Wang Xichen. Footwear – Test Method of Density for Microcellular Soles1 ScopeThis Document describes the test method for the apparent density of the entire microcellular sole. This Document is applicable to the determination of the apparent density of the entire sole of microcellular materials and composites with other materials.2 Normative ReferencesThe provisions in following documents become the essential provisions of this Document through reference in this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document. GB/T 6682-2008 Water for analytical laboratory use - Specification and test methods GB/T 22049 Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear3 Terms and DefinitionsFor the purposes of this Document, the following terms and definitions apply. 3.1 Apparent density; ρ The mass of the entire sole per unit volume.4 PrincipleAccording to Archimedes' principle, the mass of the specimen in air and water is measured; and the apparent density of the specimen (hereinafter referred to as density) is obtained by calculation.5 Equipment and Materials5.1 Test device 5.2 Water Water of Grade-3 in accordance with GB/T 6682-2008.6 Specimen and Environmental Adjusting6.1 The entire sole is used as the specimen. 6.2 Before the test, the specimen shall be adjusted at the temperature of the reference standard environment for at least 4 h in accordance with the provisions of GB/T 22049; and the test shall be carried out in this environment.7 Test Procedures7.1 Select a suitable clamp (5.1.4) and install it on the testing device (5.1). Test and record the mass Ma of the clamp (5.1.4) in the air. 7.2 Immerse the clamp (5.1.4) in water; test and record the mass Mb of the clamp (5.1.4) in water. 7.3 Return the clamp (5.1.4) to the air. Hold the specimen on the clamp (5.1.4); test and record the total mass Mc of the clamp (5.1.4) and the specimen in the air. 7.4 Immerse the specimen and the clamp (5.1.4) in water. The position of the clamp (5.1.4) in water shall be consistent with 7.2; and the specimen shall be completely immersed. During the test, pay attention that the clamp (5.1.4) and the specimen shall not touch the wall and bottom of the water tank (5.1.3). Test and record the total mass Md of the specimen and the clamp (5.1.4) in water. NOTE. Select an appropriate method to remove bubbles on the surface of the specimen. 7.5 Stop the test and calculate the density of the specimen. 7.6 Repeat the test twice according to 7.4~7.5.Finally, take the arithmetic mean of the three test results as the apparent density of the tested sole. NOTE. Choosing to use intelligent testing equipment can simplify the test procedures and calculation process.8 Test ResultsThe sole density is calculated according to Formula (1). ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 45174-2024 be delivered?Answer: The full copy PDF of English version of GB/T 45174-2024 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 45174-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 45174-2024_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 45174-2024 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 45174-2024?A step-by-step guide to download PDF of GB/T 45174-2024_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 45174-2024". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
