GB/T 4369-2015 PDF EnglishUS$90.00 · In stock · Download in 9 seconds
GB/T 4369-2015: Lithium Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 4369: Historical versions
Similar standardsGB/T 4369-2015: Lithium---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT4369-2015GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.150.99 H 64 Replacing GB/T 4369-2007 Lithium Issued on. DECEMBER 10, 2015 Implemented on. JULY 1, 2016 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the PRC; Standardization Administration of the PRC. Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Requirements... 4 4 Test methods... 5 5 Inspection rules... 5 6 Marking, packaging, transportation, storage, and quality certificate... 7 7 Order form (or contract) content... 9ForewordThis Standard is drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB/T 4369-2007 “Lithium”. As compared with GB/T 4369-2007, the main changes of this Standard are as follows. - ADD product designation; - ADJUST the chemical composition of product; - MODIFY the appearance quality of product. This Standard was proposed by China Nonferrous Metals Industry Association. This Standard shall be under the jurisdiction of China National Technical Committee for Standardization of Nonferrous Metals (SAC/TC 243). Drafting organizations of this Standard. Fengxin Ganfeng Lithium Co., Ltd., China Energy Lithium Co., Ltd., Tianqi Lithium Co., Ltd., Lithium Branch of CNNC Jianzhong Nuclear Fuel Co., Ltd., Xinjiang Asia-Europe Rate Metals Co., Ltd.. Main drafters of this Standard. Xiong Xunman, Dai Xiaoyong, Li Qiang, Zhu Shigui, Chen Qiang, Jia Zhenyong, Ma Zhenqian, Jiang Hucheng, Zuo Yongjian, Zhang Jingdong, Wang Wenhong, Chen Yuedi. The previous releases of versions of the standard replaced by this Standard are. - GB/T 4369-1984; - GB/T 4370-1984; - GB/T 4369-2007. Lithium1 ScopeThis Standard specifies the requirements, test methods, inspection rules and marking, packaging, transportation and storage, quality certificate, and order form (contract) content of lithium. This Standard applies to the lithium metal prepared from anhydrous lithium chloride as raw material, by fused salt electrolysis, and refining; for use in chemical industry, nonferrous metal, medicine, synthetic rubber catalysis, smelting deoxidation, etc.2 Normative referencesThe following documents are indispensable for the application of this document. For the dated references, only the versions with the dates indicated are applicable to this document. For the undated references, the latest version (including all the amendments) are applicable to this document. GB 190-2009 Packing symbol of dangerous goods GB/T 191-2008 Packaging - Pictorial Marking for Handling of Goods GB/T 325 (all parts) Packaging containers - steel drums GB 12268 List of dangerous goods3 Requirements3.1 Product classification The product, according to its chemical composition, is divided into 6 designations. Li-1, Li-2, Li-3, Li-4, Li-5, Li-6. 3.2 Chemical composition The product chemical composition shall conform to the provisions of Table 1. 3.4 Appearance quality 3.4.1 The surface of Li-1, Li-2, and Li-3 products has silvery white metallic luster, without obvious oil stain and shrinkage holes. A small number of pores with a diameter of less than 2 mm and cold shuts with a depth of less than 3 mm are allowed. 3.4.2 No visible inclusions are allowed in lithium products.4 Test methods4.1 The analysis of the chemical composition of lithium products is carried out according to the provisions of GB/T 20931.The analysis of lead content is carried out according to the method approved by both supply and demand sides. 4.2 The specifications of lithium products are measured by the measuring tools with corresponding precision.5 Inspection rules5.1 Inspection and acceptance Impurity contentDesign ations 5.1.1 The product shall be inspected by the supply side, to ensure that the product quality complies with the provisions of this Standard and order form (or contract), and the quality certificate is filled out. 5.2 Lot grouping Lithium products shall be submitted for acceptance in lots. Each lot shall be made up of the lithium of the same designation, the same heat number, and the same specification. 5.4 Chemical composition sampling and sample preparation 5.4.1 When the supply side is casting each lot of lithium ingots, a sample ingot of Φ100 mm×120 mm is cast at the same time. CUT off the both ends; along the cross section of the ingot, CUT into lithium sheets; PLACE in a dry sampling bottle with a ground mouth or a dry aluminum-plastic compound bag to seal. 5.4.2 The demand side can randomly draw a lithium ingot per lot. DIVIDE the lithium ingots into 3 parts according to equal height; TAKE the middle section part; PLACE in a dry sampling bottle with a ground mouth or a dry aluminum- plastic compound bag to seal. 5.5 Determination of inspection results6 Marking, packaging, transportation, storage, and quality certificate6.1 Marking 6.1.1 The inner packaging and outer label of each bag of product shall be marked. 6.1.2 Each drum of product shall be accompanied by a label or sign, which indicates. 6.1.3 The outer packaging of product shall be marked with the label graphics of “substance which emits flammable gas in contact with water” in No.4 of Table 2 of GB 190-2009, and the label of “avoiding rain” in No.6 of Table 1 of GB/T 191- 2008. 6.2 Packaging 6.2.3 When the demand side has special requirements for packaging, the supply and demand sides shall negotiate separately. 6.3 Transportation and storage 6.3.1 Lithium product belongs to the flammable good when wet in GB 12268. During transportation, fire and moisture shall be prevented; no violent collision shall be permitted; and the drum body shall not roll on the ground. The automobile transportation shall be carried out in accordance with the provisions of JT 617 and JT 618. 6.4 Quality certificate Each lot of products shall be accompanied by a quality certificate, which indicates.7 Order form (or contract) contentThe order form (or contract) for ordering the materials listed in this Standard shall include the following contents. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 4369-2015 be delivered?Answer: The full copy PDF of English version of GB/T 4369-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 4369-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4369-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 4369-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 4369-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4369-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 4369-2015?A step-by-step guide to download PDF of GB/T 4369-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 4369-2015". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
