GB/T 43382-2023 PDF EnglishUS$260.00 · In stock · Download in 9 seconds
GB/T 43382-2023: Road vehicles direction of motion stereotypes for hand controls Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 43382-2023: Road vehicles direction of motion stereotypes for hand controls---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT43382-2023GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.020 CCS T 04 GB/T 43382-2023 Road vehicles direction of motion stereotypes for hand controls (ISO 12214:2018, Road vehicles - Direction-of-motion stereotypes for automotive hand controls, MOD) ISSUED ON: NOVEMBER 27, 2023 IMPLEMENTED ON: MARCH 01, 2024 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Terms and definitions ... 5 4 Design requirements ... 6 Annex A (informative) Structure changes of this document compared with ISO 12214:2018 ... 14 Annex B (informative) Technical differences between this document and ISO 12214:2018 and their reasons ... 15ForewordThis document was drafted in accordance with the provisions of GB/T 1.1-2020 “Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents”. This document modified and adopted ISO 12214:2018 “Road vehicles - Direction-of- motion stereotypes for automotive hand controls”. Compared with ISO 12214:2018, this document has many structural adjustments. See Annex A for a comparison list of structure number changes between the two documents. Compared with ISO 12214:2018, this document has many technical differences. The clauses involved are marked with a vertical single line (|) in the outer margin of the page. See Annex B for a list of these technical differences and their reasons. The following editorial changes have been made to this document: - DELETE the annotated description of right-hand driving and related usage habits in foreign markets in Table 1, Table 2 and Table 4 of ISO 12214:2018; - MODIFY the explanation of c in the note of Table 2; - ADD a supplementary explanation that if the control is the controlled part itself and the direction of on/off motion is not restricted; - DELETE the first paragraph of 4.3.1 in ISO 12214:2018; - MODIFY the notes to Table 3 and INCORPORATE part of the content into 4.3.2 as text; - ADD the diagrams for the configurations of electric window controls in the form of toggles and levers in Table 4; - MODIFY the notes to Table 4 and INCORPORATE part of the content into 4.3.3 as text. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority of this document shall not be held responsible for identifying any or all such patent rights. This document was proposed by Ministry of Industry and Information Technology of the People’s Republic of China. This document shall be under the jurisdiction of National Technical Committee of Auto Standardization (SAC/TC 114). Road vehicles direction of motion stereotypes for hand controls1 ScopeThis document specifies the design requirements for the direction of motion stereotypes of vehicle hand controls (hand controls). This document applies to Class M and Class N vehicles, and other types of vehicles implement this as a reference.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 4782 Road vehicles - Controls, indicators and tell-tales - Vocabulary GB/T 12673 Motor vehicle main dimensions measurement method GB/T 15089 Classification of power-driven vehicles and trailers GB/T 17867 Location of hand controls, indicators and tell-tales in motor vehicles3 Terms and definitionsFor the purpose of this document, the terms and definitions defined in GB/T 4782, GB/T 12673, GB/T 15089 and GB/T 17867 and the following apply. 3.1 control configuration Relevant combination of control type, location, orientation and mounting plane. 3.2 direction of motion stereotype Direction of motion that a majority of people expects for the effective operation of a control. 3.3 stereotype strength Common way that most users activate a control. 3.4 on/off or increase/decrease control Non-specific function control with activation/deactivation functions or strengthening/weakening effects. 3.5 specific function control Control used to activate specific functions. Examples: Door locking and unlocking controls, window raising and lowering controls, low/high beam turning on controls and wiper controls.4 Design requirements4.1 General The three-dimensional rectangular coordinate system referenced by the direction of motion and operation direction of controls shall comply with the requirements of GB/T 12673. The vehicle coordinate system is shown in Figure 1: - Z plane, which is a plane parallel to the Z datum plane; - X plane, which is a plane parallel to the X datum plane; - Y plane, which is a plane parallel to the Y datum plane. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 43382-2023 be delivered?Answer: The full copy PDF of English version of GB/T 43382-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 43382-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43382-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 43382-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 43382-2023?A step-by-step guide to download PDF of GB/T 43382-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 43382-2023". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
