Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 42515-2023 PDF English

US$155.00 · In stock · Download in 9 seconds
GB/T 42515-2023: Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 42515-2023155 Add to Cart Auto, 9 seconds. Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders Valid

Similar standards

GB/T 42511   GB/T 41706   GB/T 41704   GB/T 45330   

GB/T 42515-2023: Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT42515-2023
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.160 CCS H 16 GB/T 42515-2023 / ISO 4496:2017 Metallic Powders - Determination of Acid-insoluble Content in Iron, Copper, Tin and Bronze Powders (ISO 4496:2017, IDT) ISSUED ON: MAY 23, 2023 IMPLEMENTED ON: DECEMBER 1, 2023 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Normative References ... 4 3 Terms and Definitions ... 4 4 Field of Application ... 4 5 Reagents ... 4 6 Equipment ... 5 7 Sampling ... 5 8 Test Procedures ... 5 9 Expression of Calculation Results ... 7 10 Test Report ... 7 Bibliography ... 9 Metallic Powders - Determination of Acid-insoluble Content in Iron, Copper, Tin and Bronze Powders

1 Scope

This document describes a method for the determination of the content of non-metallic materials insoluble in common mineral acids in metallic powders of iron, copper, tin and bronze. This document applies to the determination of acid-insoluble silica and silicates, carbides, alumina, clays or other poorly soluble oxides introduced in raw materials or during the production process.

2 Normative References

This document does not have normative references.

3 Terms and Definitions

This document does not have terms or definitions that need to be defined.

4 Field of Application

This Method can be applied to iron powder, copper powder, tin powder, bronze alloy powder and copper-tin mixed powder without added lubricant.

5 Reagents

During the analysis, only analytically pure reagents, distilled water or water of equivalent purity are used. The required reagents are shown in Table 1. min. After the solution cools down, let it stand for 5 min. 8.1.4 Use medium-speed filter paper to filter the solution and use hot water or hot hydrochloric acid (5.2) to clean the residue. Repeat cleaning, until iron salts cannot be detected in the water. Potassium thiocyanide (5.3) can be selected as the detection reagent. 8.1.5 Weigh-take the crucible (the mass is m2), accurate to 0.0001 g. Place the filter paper with residue in the crucible, place the crucible on the electric stove to dry and carbonize the filter paper. In a muffle furnace with a temperature of 900 C ~ 1,000 C, burn the crucible, until the difference in continuous weighing does not exceed 0.0001 g after the crucible containing the residue cools down. Completely cool the crucible in a desiccator. 8.1.6 Weigh the mass of the crucible containing the residue (the mass is m3), accurate to 0.0001 g. 8.2 Copper, Tin and Bronze Powders 8.2.1 Weigh-take 5 g (accurate to 0.0001 g) of sample as the test portion (the mass is m1). Place the test portion in a glass beaker. 8.2.2 Add 50 mL of hydrochloric acid (5.5) and use a watch glass to cover the glass beaker. Place the glass beaker on the edge of the electric stove, at a low temperature, decompose it for at least 30 min. 8.2.3 Remove the glass beaker, after it slightly cools down, add 50 mL of nitric acid (5.6) and wait for the initial reaction. The initial reaction usually occurs 10 min after adding nitric acid. After the reaction is completed, add another 50 mL of nitric acid (5.6). 8.2.4 Place the glass beaker on the electric stove, heat the solution to boiling, and maintain the boiling, until the volume of the solution is reduced by half. If the residue is black, remove the glass beaker from the electric stove, add a few milliliters of hydrogen peroxide (5.7) and maintain the boiling for 2 min. Repeatedly add hydrogen peroxide (5.7), until there is no black residue. 8.2.5 Slowly add 50 mL of hot water, then, heat it to boiling. Maintain the boiling for 1 min, after the solution cools down, let it stand for 5 min. 8.2.6 Use medium-speed filter paper to filter the solution. Firstly, use hot hydrochloric acid (5.5) to clean the residue, and finally, use hot water to wash it. Repeatedly use hot water to clean it, until: ---For copper powder and bronze powder, copper salts cannot be detected in the water using sodium diethyldithiocarbamate (5.9), or ---For tin powder, tin salts cannot be detected using sodium sulfide (5.10) or hydrogen sulfide (5.11). If it is possible that lead sulfate is present, firstly, use hot ammonium acetate (5.8) to clean it ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 42515-2023 be delivered?Answer: The full copy PDF of English version of GB/T 42515-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 42515-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42515-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 42515-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 42515-2023?

A step-by-step guide to download PDF of GB/T 42515-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 42515-2023".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9