GB/T 41656-2022 PDF EnglishUS$170.00 · In stock · Download in 9 seconds
GB/T 41656-2022: Road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 41656-2022: Road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT41656-2022 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.08.10 CCS T 72 Road Vehicles - Mechanical Coupling between Towing Vehicles with Rear-mounted Coupling and Drawbar Trailers - Interchangeability 接互换性 (ISO 11406.2001, Commercial Road Vehicles - Mechanical Coupling between Towing Vehicles with Rear-mounted Coupling and Drawbar Trailers - Interchangeability, MOD) Issued on: JULY 11, 2022 Implemented on: NOVEMBER 1, 2022 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 5 2 Normative References... 5 3 Terms and Definitions... 5 4 Interchangeability Dimensions... 6 Appendix A (informative) Schematic Diagrams of Combination Vehicle Models... 9 Appendix B (informative) An Example of Calculation of Minimum Value of Front Radius of Gyration... 11ForewordThis document was drafted in accordance with the rules in GB/T 1.1-2020 Directives for Standardization - Part 1.Rules for the Structure and Drafting of Standardizing Documents. This document modifies and adopts ISO 11406.2001 Commercial Road Vehicles - Mechanical Coupling between Towing Vehicles with Rear-mounted Coupling and Drawbar Trailers - Interchangeability. In comparison with ISO 11406.2001, this document makes the following structural adjustments. a) Chapter 2 Normative References is added; b) Chapter 3 Terms and Definitions is added; c) Chapter 4 corresponds to Chapter 2 of ISO 11406.2001; d) Appendix A corresponds to Appendix B of ISO 11406.2001; e) Appendix B corresponds to Appendix A of ISO 11406.2001. The technical difference between this document and ISO 11406.2001, and the cause for the difference is as follows. ---The length of drawbar trailer combination is adjusted from “less than or equal to 18,750 mm” into “less than or equal to 20,000 mm” (see 4.1.1), so as to comply with the requirements of the length limit of freight trains in China. This document makes the following editorial modifications. a) “commercial” is deleted from the title of the document; b) The content of No.1 technical corrigendum of ISO 11406.2001 is incorporated; the position of the marking arrow representing the minimum front radius of gyration (Cmin) in Figure 2 is modified from the first circular arc line on the left to the second circular arc line. Please be noted that certain content of this document may involve patents. The institution issuing this document does not undertake the responsibility of identifying these patents. This document was proposed by the Ministry of Industry and Information Technology of the People’s Republic of China. This document shall be under the jurisdiction of National Technical Committee 114 on Road Vehicles of Standardization Administration of China (SAC/TC 114). Road Vehicles - Mechanical Coupling between Towing Vehicles with Rear-mounted Coupling and Drawbar Trailers - Interchangeability1 ScopeThis document specifies the requirements for interchangeability dimensions of mechanical coupling between towing trucks with rear-mounted coupling and drawbar trailers. This document is applicable to combination vehicles consisting of a towing truck with rear- mounted coupling and a drawbar trailer. This document does not apply to special-purpose combination vehicles that can be extended, and with the coupling mounted on the front lower part of the towing truck and a closed coupling device. NOTE. the combination vehicle models (see Appendix A) that comply with the requirements of this document and the combination vehicle models that comply with the requirements of GB/T 41651 do not have interchangeability.2 Normative ReferencesThe contents of the following documents constitute indispensable clauses of this document through the normative references in this text. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document. GB/T 3730.1 Motor Vehicles and Trailers - Types - Terms and Definitions GB/T 39661-2020 Swap Bodies for Road Transport - Technical Requirements and Test Methods GB/T 41651 Road Vehicles - Mechanical Coupling between Towing Vehicles with Coupling Mounted Forward and Below and Center-axle Trailers - Interchangeability (GB/T 41651-2022, ISO 11407.2004, MOD)3 Terms and DefinitionsWhat is defined in GB/T 3730.1 and GB/T 41651, and the following terms and definitions are applicable to this document. 3.1 Towing Truck ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 41656-2022 be delivered?Answer: The full copy PDF of English version of GB/T 41656-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 41656-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41656-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 41656-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 41656-2022?A step-by-step guide to download PDF of GB/T 41656-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 41656-2022". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
