GB/T 39415.2-2020 PDF EnglishUS$110.00 · In stock · Download in 9 seconds
GB/T 39415.2-2020: Packaging sacks - Method of specifications for characteristics - Part 2:SAcks made from thermoplastic flexible film Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 39415.2-2020: Packaging sacks - Method of specifications for characteristics - Part 2:SAcks made from thermoplastic flexible film---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT39415.2-2020 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 55.080 A 82 Packaging sacks - Method of specifications for characteristics - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994, Packaging - Method of specification for sacks -Part 2: Sacks made from thermoplastic flexible film, MOD) ISSUED ON: NOVEMBER 19, 2020 IMPLEMENTED ON: JANUARY 01, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of the People's Republic of China. Table of ContentsForeword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Method of specifications ... 5 Packaging sacks - Method of specifications for characteristics - Part 2: Sacks made from thermoplastic flexible film1 ScopeThis Part of GB/T 39415 specifies the method of specifications for characteristics in ordering documents of sacks made from thermoplastic flexible film. This Part is applicable to the sacks made from thermoplastic flexible film specified in GB/T 17858.2. It may refer to this Part when formulating standards for various paper sacks.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 17858.2, Packaging sacks - Vocabulary and types - Part 2: Sacks made from thermoplastic flexible film (GB/T 17858.2-2010, ISO 6590-2:1986, MOD) GB/T 31556.2, Packaging sacks - Description and method of measurement for dimension - Part 2: Sacks made from thermoplastic flexible film (GB/T 31556.2-2015, ISO 6591-2:1985, MOD)3 Method of specifications3.1 General When drafting the ordering documents for sacks made from thermoplastic flexible film, both the supplier and the purchaser shall negotiate and select the appropriate content from the following options to be included in the order document. The format of the order document shall be negotiated between the supplier and - Sack width, b; - Frill width, e; - Sack bottom width, c; - Valve port width, g; - Valve port length, f; - Valve sleeve length, i; - Valve sleeve position, l: the distance between the outermost edge of the sack and the outermost edge of the valve sleeve is measured parallel to the bottom. 3.2.4 Material It shall specify the type, quantitative [in grams per square meter (g/m2)] or thickness [in micron (μm)] of each layer of material, surface treatment (such as anti-slip, anti-static). If there is surface treatment, it shall be stated that the treatment surface faces inward, outward or double-sided treatment. The material shall specify the following requirements: - Separable or integral; - Paper type (such as ordinary paper sack paper, stretchable paper sack paper) and basis weight; - Film types, such as: low density polyethylene (PE-LD), linear low-density polyethylene (PE-LLD), high density polyethylene (PE-HD), polyvinylidene chloride (PVDC), ethylene-vinyl acetate Ester copolymer (E/VAC); - Film state (flat film or tube film); - Film thickness in micrometers (μm); - Melt flow index of the film, in grams per 10 minutes (g/10min); - Length, in millimeters (mm), when it is different from other layers (usually seen in separable or integrated tube films); - Width of the ruffle, in millimeters (mm), when it is different from other layers (usually seen in a separable or integrated tube film); - Width, in millimeters (mm), when it is different from other layers (usually seen in separable or integrated tube films); The bottom direction requirements include: - Fold to the front of the sack; - Fold to the back of the sack. 3.2.10 Heat seal sealing Heat seal sealing requirements include: - Heat sealing margin, n, in millimeters (mm); - Heat sealing position: the top or bottom of the sack, the top and bottom are determined according to the printed content. 3.2.11 Filling port (for open sack only) The requirements for filling port of open sack include: - Horizontal pasting (with/without): • All layers; • Innermost layer has no horizontal pasting. - Thumb mouth, yes/no. 3.2.12 Printing Printing requirements include: - Color and performance requirements of the ink (such as abrasion resistance, UV resistance); - Print a complete description of the requirements and positions of the main elements, such as the front, back, frills, valve port end, non-valve port end, and valve port end direction. 3.2.13 Packaging Packaging requirements include: - Bundles of sacks: tied/untied/folded; - Bundled into packages: the total number of bags per package; - Bundled into pallet units: the total number of bags per unit; - Bundle stacking method; ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 39415.2-2020 be delivered?Answer: The full copy PDF of English version of GB/T 39415.2-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 39415.2-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39415.2-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 39415.2-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 39415.2-2020?A step-by-step guide to download PDF of GB/T 39415.2-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 39415.2-2020". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
