GB/T 38607-2020 PDF EnglishUS$260.00 · In stock · Download in 9 seconds
GB/T 38607-2020: Office furniture - Tables and desks - Test methods for the determination of stability, strength and durability Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 38607-2020: Office furniture - Tables and desks - Test methods for the determination of stability, strength and durability---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT38607-2020 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 97.140 Y 80 GB/T 38607-2020 / ISO 21016:2007 Office furniture - Tables and desks - Test methods for the determination of stability, strength and durability (ISO 21016:2007, IDT) ISSUED ON: MARCH 31, 2020 IMPLEMENTED ON: OCTOBER 01, 2020 Issued by: State Administration for Market Regulation; Standardization Administration of the PRC. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Terms and definitions ... 5 4 General test conditions ... 6 5 Test apparatus ... 9 6 Test methods ... 10 7 Test report ... 20 Annex A (Informative) Guidance for the choice of number of cycles, forces and heights for the stability, strength and durability tests ... 22ForewordThis Standard is drafted in accordance with the rules given in GB/T 1.1-2009. This Standard, using translation method, is identical to ISO 21016:2007 "Office furniture - Tables and desks - Test methods for the determination of stability, strength and durability". China’s document which has a consistent correspondence with the international document normatively referenced in this Standard is as follows: - GB/T 10357.5-2011 Test of mechanical properties of furniture - Part 5: Strength and durability of storage units (ISO 7170:2005, MOD) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority of this document shall not be held responsible for identifying any or all such patent rights. This Standard was proposed by China National Light Industry Council. This Standard shall be under the jurisdiction of National Technical Committee 480 on Furniture of Standardization Administration of China (SAC/TC 480). Drafting organizations of this Standard: DaKang Holding Co., Ltd., Foshan Wision Furniture Manufacturing Co., Ltd., Shanghai Institute of Quality Inspection and Technical Research, Zhongshan Huasheng Furniture Manufacturing Co., Ltd., Xiamen Biaopu Standardization Service Co., Ltd., Huzhou Haiqing Wood Bamboo Technology Co., Ltd., Zhejiang Sunon Furniture Manufacturing Co., Ltd., China National Quality Supervision and Testing Center for Furniture (Guangdong), National Center for Quality Supervision & Inspection of Furniture and Indoor Environment, Zhejiang Furniture and Hardware Research Institute. Main drafters of this Standard: Liu Chenguang, Luo Jufen, Mao Rujia, Zhou Shaoying, Zhu Jin, Luo Xin, Zhong Wenhan, Li Gan, Liang Jinkun, Ye Shunbin, Li Xiaoke, Zhang Xujun. Office furniture - Tables and desks - Test methods for the determination of stability, strength and durability1 ScopeThis Standard specifies test methods for the determination of the stability, the strength and the durability of office tables designed for use in the seated or standing position, e.g. work tables, height-adjustable tables, meeting tables and desks. This Standard applies to products that are fully assembled and ready for use. This Standard does not contain test methods for storage elements, which can be found in ISO 7170. The test methods consist of the application, to various parts of the unit, of loads, forces and velocities simulating normal functional use of office table, as well as misuse, that can reasonably be expected to occur. With the exception of the deflection of table tops, the tests are designed to evaluate properties without regard to materials, design, construction and manufacturing processes. The test results are valid only for the sample tested. These results can be used to represent the performance of production models provided that the tested sample is representative of the production model. Tests carried out according to this Standard are intended to demonstrate the ability of the item to give satisfactory service in its intended use environment. However, such tests do not ensure that structural failure will not eventually occur as a result of habitual misuse or after an excessively long period of service. The test methods in this Standard have been developed for units or components that have not been in use. However, when properly justified, they can be used for product fault investigation. This Standard specifies test methods only. It does not specify requirements. These should be specified in a requirements document. If this is not available, forces and number of cycles can be found in Annex A. Assessment of ageing and degradation is not included in this Standard.2 Normative referencesThe following documents are indispensable for the application of this document. For ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 38607-2020 be delivered?Answer: The full copy PDF of English version of GB/T 38607-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 38607-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38607-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 38607-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 38607-2020?A step-by-step guide to download PDF of GB/T 38607-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 38607-2020". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
