GB/T 37785-2019 PDF EnglishUS$110.00 · In stock · Download in 9 seconds
GB/T 37785-2019: Flue gas desulfurization gypsum Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 37785-2019: Flue gas desulfurization gypsum---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT37785-2019GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 91.100.10 Q 62 Flue gas desulfurization gypsum 烟气脱硫石膏 ISSUED ON: AUGUST 30, 2019 IMPLEMENTED ON: JULY 01, 2020 Issued by: State Administration for Market Regulation; Standardization Administration of the People's Republic of China. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Grading and marking ... 4 4 Technical requirements ... 4 5 Test method ... 5 6 Inspection rules ... 7 7 Packaging, labeling, transportation and storage ... 8 Flue gas desulfurization gypsum1 ScopeThis standard specifies the classification and labeling, technical requirements, test methods, inspection rules and packaging, marking, and transportation and storage of flue gas desulfurization gypsum. This standard applies to flue gas desulfurization gypsum that adopts limestone/lime - gypsum wet method to desulfurize and purify sulfur-containing flue gas, so as to produce the main component of calcium sulfate dihydrate (CaSO4•2H2O).2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document. GB/T 176 Methods for chemical analysis of cement GB/T 2007.1 General rules for the sampling and sample preparation of minerals in bulk - Sampling by manual method GB/T 5484 Methods for chemical analysis of gypsum3 Grading and marking3.1 Grading Products are mainly divided into three grades: Grade 1, Grade 2, and Grade 3 according to the content of calcium sulfate dihydrate. 3.2 Marking It shall be marked in the order of product name, grade and standard number. Example: For Grade 1 flue gas desulfurization gypsum, it is marked as follows: Flue gas desulfurization gypsum Grade 1 GB/T 37785-20194 Technical requirementsThe technical requirements for flue gas desulfurization gypsum shall meet the Where, w(CaSO4•2H2O) – Content of calcium sulfate dihydrate (mass fraction), %; wc – Content of crystal water (mass fraction), %; 20.9275 -- The conversion factor of crystal water content to calcium sulfate dihydrate content. The calculation result is accurate to 0.01%. 5.4 Chloride ion (Cl-) Measured according to the method specified in GB/T 176. The calculated results are expressed in milligrams per kilogram (mg/kg). The calculation result is accurate to 1 mg/kg. 5.5 Calcium sulfite hemihydrate (CaSO3•1/2H2O) Determine the sulfur dioxide content (mass fraction) w(SO2) according to the method specified in GB/T 5484. Calcium sulfite hemihydrate content (mass fraction) by Formula (2) calculation: Where, w(CaSO3•1/2H2O) – Content of calcium sulfite hemihydrate (mass fraction), %; w(SO2) – Content of sulfur dioxide (mass fraction), %; 2.016 -- The conversion factor of sulfur dioxide content to calcium sulfite hemihydrate content. The calculation result is accurate to 0.01%. 5.6 Water-soluble magnesium oxide (MgO) Measure according to the method specified in GB/T 5484. The calculation result is accurate to 0.01%. 5.7 Water-soluble sodium oxide (Na2O) Measure according to the method specified in GB/T 5484. The calculation result is accurate to 0.01%. 5.8 pH value Measure according to the method specified in GB/T 5484. The result is accurate to 0.1.6 Inspection rules6.1 Inspection classification 6.1.1 Exit-factory inspection The exit-factory inspection items are: attached water content, calcium sulfate dihydrate (CaSO4•2H2O), and chloride ion (Cl-). 6.1.2 Type inspection The type inspection items are all the technical requirements stipulated in Chapter 4. In one of the following situations, the type inspection of the product shall be carried out: a) When there are major changes in raw materials, processes or equipment; b) When the production-line is discontinued for more than half a year and then the production is resumed; c) Once a year during normal production. 6.2 Batching and sampling 6.2.1 Batching For a manufacturing organization with an annual output of flue gas desulfurization gypsum less than 50,000 tons, no more than 150 tons is deemed as a batch; for a manufacturing organization with an annual output of 50,000 tons ~ 100,000 tons, no more than 300 tons is deemed as a batch; for a manufacturing organization with an annual output of 100,000 tons ~ 200,000 tons, no more than 500 tons is deemed as a batch; for a manufacturing organization with an annual output of more than 200,000 tons, no more than 800 tons is deemed as a batch. Each batch is deemed as a serial number; if there is less than one batch, it is deemed as a batch. 6.2.2 Sampling Sampling shall be carried out according to the method specified in GB/T 2007.1; the total sampling amount of each batch shall not be less than 2kg. Divide the sample into ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 37785-2019 be delivered?Answer: The full copy PDF of English version of GB/T 37785-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 37785-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37785-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 37785-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 37785-2019?A step-by-step guide to download PDF of GB/T 37785-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 37785-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
