GB/T 36258-2018 PDF EnglishUS$90.00 · In stock · Download in 9 seconds
GB/T 36258-2018: Grounds-service connections of aircraft potable water, toilet-flush water and toilet drain Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 36258-2018: Grounds-service connections of aircraft potable water, toilet-flush water and toilet drain---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT36258-2018 Grounds-service connections of aircraft potable water, toilet-flush water and toilet drain ICS 49.080 V39 National Standards of People's Republic of China Ground joint for aircraft drinking water, toilet water and drainage (ISO 17775.2006, Aircraft-Grounds-serviceconnections- Published on.2018-06-07 2019-01-01 implementation State Market Supervisory Administration China National Standardization Administration issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method equivalent to ISO 17775.2006 "aircraft ground service to connect drinking water, toilet flushing water and toilet Excreted. The documents of our country that have a consistent correspondence with the international documents referenced in this standard are as follows. ---GB/T 131-2006 Product Geometry Technical Specification (GPS) Representation of surface structure in technical product documentation (ISO 1302.2002, IDT) ---GB/T 1182-2008 Product Geometry Specification (GPS) Geometric Tolerance Shape, Orientation, Position and Runout Tolerance (ISO 1101.2004, IDT) This standard has made the following editorial changes. --- The standard name was changed to "ground joints for aircraft drinking water, toilet water and drainage". This standard is proposed and managed by the National Aircraft Standardization Technical Committee (SAC/TC435). This standard was drafted. China Aviation Integrated Technology Research Institute. The main drafters of this standard. Xu Pengguo, Wang Huidan, Lanjiang. Ground joint for aircraft drinking water, toilet water and drainage1 ScopeThis standard specifies the size and material requirements for ground joints for aircraft drinking water, toilet water and drainage. This standard applies to the design and manufacture of ground joints (hereinafter referred to as joints) for aircraft drinking water, toilet water and drainage.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO 129-1 Technical drawings - Dimensions and tolerances - Part 1. General guidelines (Technicaldrawings-Indication ofdimensionsandtolerances-Part 1.Generalprinciples) ISO 1101 Product Geometry Specification (GPS) Geometric Tolerance Shape, Orientation, Position, and Runout Tolerance (Geometrical ProductSpecifications(GPS)-Geometricaltolerancing-Tolerancesofform,orientation,locationand Run-out) ISO 1302 Product Geometry Specification (GPS) Representation of surface structure in technical product documentation [GeometricalProduct Specifications(GPS)-Indicationofsurfacetextureintechnicalproductdocumentation]3 sizeThe dimensions of the joint are shown in Figure 1 and Table 1. All detailed dimensions and tolerances should be common on all aircraft, ground connection The mouth should match it. Figure 1 joint structure Table 1 Dimensions are in millimeters (inches) system size Φd1 φd2 φd3 φd4 l1 l2 l3 l4 l5 drinking water maximum 23.52 (0.926) 19.61 (0.772) 15.60 (0.614) 19.507 (0.768) - 7.493 (0.295) 11.252 (0.443) 3.68 (0.145) 1.778 (0.070) Minimum 23.42 (0.922) 19.51 (0.768) 15.44 (0.608) 18.339 (0.722) 24.765 (0.975) 6.985 (0.275) 10.744 (0.423) 3.43 (0.135) 1.27 (0.050) Toilet water maximum 29.87 (1.176) 25.96 (1.022) 21.62 (0.851) 25.959 (1.022) - 7.493 (0.295) 11.252 (0.443) 3.68 (0.145) 1.778 (0.070) Minimum 29.77 (1.172) 25.86 (1.018) 21.41 (0.843) 25.857 (1.018) 24.765 (0.975) 6.985 (0.275) 10.744 (0.423) 3.43 (0.135) 1.27 (0.050) drain maximum 111.38 (4.385) 106.807 (4.205) 101.727 (4.005) 108.102 (4.256) - 6.096 (0.240) 14.529 (0.572) 5.33 (0.210) 2.54 (0.100) Minimum 111.25 (4.380) 106.68 (4.200) 98.806 (3.890) 107.975 (4.251) 30.226 (1.190) 5.588 (0.220) 14.021 (0.552) 5.23 (0.206) 2.032 (0.080) system size R1 r2 r3 α1(°) α2(°) α3(°) α4(°) drinking water maximum 0.76 (0.030) 1.02 (0.040) 0.76 (0.030) Minimum 0.51 (0.020) 0.76 (0.030) 1.27 (0.050) Toilet water maximum 0.76 (0.030) 1.02 (0.040) 0.76 (0.030) Minimum 0.51 (0.020) 0.76 (0.030) 1.27 (0.050) drain maximum 0.762 (0.030) 1.02 (0.040) 0.889 (0.035) Minimum 0.254 (0.010) 0.76 (0.030) 0.254 (0.010)4 materials4.1 This standard does not stipulate the material of the joint, but the materials used in all relevant components should be used with the aircraft drinking water, toilet water and platoon. The water used in the water system is compatible with the chemicals. For stainless steel materials, the strength and hardness of the intended application should be guaranteed. Should pass the test Verify that the material selected is suitable for the joint used to make the fluid used in the aircraft. 4.2 The surface and dimensions in Figures 1 and 1 shall meet the requirements of ISO 129-1, ISO 1101 and ISO 1302. 4.3 All fillet radii shall be 1.5 mm (0.059 in) unless otherwise specified. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 36258-2018 be delivered?Answer: The full copy PDF of English version of GB/T 36258-2018 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 36258-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36258-2018_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 36258-2018 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 36258-2018?A step-by-step guide to download PDF of GB/T 36258-2018_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 36258-2018". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
