GB/T 33370-2016 PDF EnglishUS$75.00 · In stock · Download in 9 seconds
GB/T 33370-2016: The measuring method for copper and copper alloys soften temperature Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 33370-2016: The measuring method for copper and copper alloys soften temperature---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33370-2016GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.040.99 H 13 GB/T 33370-2016 The measuring method for copper and copper alloys soften temperature Issued on: DECEMBER 30, 2016 Implemented on: NOVEMBER 01, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 4 4 Method principle... 5 5 Instruments and equipment... 5 6 Test specimen... 5 7 Test steps... 6 8 Test method... 7 9 Test report... 8ForewordThis Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard was proposed by China Nonferrous Metals Industry Association. This Standard shall be under the jurisdiction of National Technical Committee on Nonferrous Metals of Standardization Administration of China (SAC/TC 243). Responsible drafting organizations of this Standard. China Aluminum Luoyang Copper Co., Ltd., Heze Guangyuan Copper Belt Co., Ltd., Anhui Xinke New Materials Co., Ltd., Tongling Jinwei Copper Co., Ltd., National Copper and Aluminum Smelting and Processing Product Quality Supervision and Inspection Center, Ningbo Xingye Shengtai Group Co., Ltd., Anhui Chujiang Technology New Materials Co., Ltd., Taiyuan Jinxi Chunlei Copper Co., Ltd., Suzhou Nonferrous Metals Research Institute Co., Ltd., Shaoxing Libo Electric Co., Ltd. Main drafters of this standard. Lou Dongge, Li Xianghai, Wang Shidong, Wang Nan, Jia Zhijun, Yu Liansheng, Gu Fengxian, Peng Zuohua, Ge Xiaoniu, Mao Yaodong, Liu Qinglan, Chen Wei, Zheng Yun, Lin Yingbin, Meng Peiyi, Zhang Wenqin, Xu Gaolei. The measuring method for copper and copper alloys soften temperature1 ScopeThis standard specifies the terminology, test requirements, test steps, test methods and test reports for the softening temperature determination method of copper and copper alloys. This standard is applicable to the determination of the softening temperature of copper and copper alloy materials or products in a laboratory environment.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 231.1 Metallic materials - Brinell hardness test - Part 1.Test method GB/T 4340.1 Metallic materials - Vickers hardness test - Part 1.Test method3 Terms and definitionsFor the purpose of this document, the following terms and definitions apply. 3.1 soften temperature The copper and copper alloy materials are taken out of the furnace after being kept warm for 1 hour and naturally cooled to room temperature. The corresponding holding temperature when the hardness drops to 80% of the original hardness. Note. The softening temperature is a quantitative indicator for evaluating the high- temperature softening resistance of alloy materials. 3.2 original hardness The hardness of the original sample measured at room temperature. 3.3 soften temperature behavior curve A curve used to reflect the high-temperature softening resistance of copper and copper alloy materials, with the heating temperature as the horizontal axis and the corresponding sample hardness as the vertical axis.4 Method principleUsing an annealing furnace with corresponding accuracy, the copper and copper alloy samples are annealed at different temperatures for a specified time of 1 hour. After the annealing is completed, the hardness test is carried out together with the original sample. The softening annealing curve is drawn with the holding temperature as the horizontal axis and the hardness value as the vertical axis. Through the softening annealing curve, it is determined that the holding temperature corresponding to the hardness dropping to 80% of the original hardness is the softening temperature of the sample.5 Instruments and equipment5.1 Annealing furnace 5.1.1 The accuracy of the annealing furnace shall not exceed ±0.5 ℃. 5.1.2 The temperature variation of the constant temperature zone in the annealing furnace is less than 5 ℃. 5.2 Hardness tester 5.2.1 Vickers hardness tester. 5.2.2 Brinell hardness tester.6 Test specimen6.1 The material of the specimen shall be uniform and free of internal defects. 6.2 After the copper and copper alloy bars with a nominal outer diameter ≥15 mm are subjected to insulation annealing, their Brinell hardness shall be measured to determine the softening temperature of the material. After the copper and copper alloy bars with a nominal outer diameter < 15 mm are subjected to insulation annealing, their Vickers hardness shall be measured to determine the softening temperature of the material. 6.3 After the copper and copper alloy pipes with a nominal outer diameter ≥15 mm and a wall thickness ≥4 mm are subjected to insulation annealing, their Brinell hardness ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 33370-2016 be delivered?Answer: The full copy PDF of English version of GB/T 33370-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 33370-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33370-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33370-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 33370-2016?A step-by-step guide to download PDF of GB/T 33370-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 33370-2016". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
