GB/T 33014.5-2016 PDF EnglishUS$135.00 · In stock · Download in 9 seconds
GB/T 33014.5-2016: Road vehicles -- Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy -- Part 5: Strip line Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 33014.5-2016: Road vehicles -- Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy -- Part 5: Strip line---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33014.5-2016 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.040.10 T 36 Road vehicles - Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 5.Stripline (ISO 11452-5.2002, Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5. Stripline, MOD) Issued on. OCTOBER 13, 2016 Implemented on. NOVEMBER 1, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 5 2 Normative reference... 5 3 Terms and definitions... 5 4 Test conditions... 5 5 Test apparatus and instrumentation... 6 6 Test... 9 Annex A (informative) Stripline design... 11 Annex B (informative) Function performance status classification (FPSC)... 15ForewordGB/T 33014 “Road vehicles - Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy” consists of the following parts. - Part 1.General; - Part 2.Absorber-lined shielded enclosure; - Part 3.Transverse electromagnetic (TEM) cell; - Part 4.Bulk current injection (BCI); - Part 5.Stripeline; - Part 7.Direct radio frequency (RF) power injection; - Part 8.Magnetic field immunity; - Part 9.Portable transmitter simulation; - Part 10.Conduction immunity method for extended audio range; - Part 11.Reverberation chamber. This Part is Part 5 of GB/T 33014. This Part is drafted in accordance with the rules given in GB/T 1.1-2009. This Part uses the re-drafting method to modify and adopt ISO 11452-5.2002 “Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5.Stripeline”. The technical differences between this Part and ISO 11452-5.2002 are as follows. - PREPARE Clause 1 according to the provisions of GB/T 1.1-2009, and MOVE the contents that are not suitable for Clause 1 to Clause 4; - REPLACE the reference standard ISO 11452-1 WITH GB/T 33014.1 modifying and adopting ISO 11452-1; - ADD a supplementary instruction (εr ≤ 1.4) to insulating base and insulating support in 5.3.1 with reference to the relevant contents in other standards, to facilitate the standard operation; - The artificial network in 5.3.1 of the original international standard references Annex C, which is modified to the equivalent Annex A of GB/T 33014.2-2016, to avoid duplication of the same content and the inconsistency of the original international standard - ADD GB/T 33014.2-2016 in the normative references; - For consistency in understanding and presentation with Part 1, I, II, III, IV, V of Table B.1 are changed to L1, L2, etc., and I, II, III, etc. are understood as status I, II, III, etc. The following editorial changes have been made in this Part. - DELETE the foreword and introduction of the original international standard; - DELETE Annex C of the original international standard. This Part is proposed by Ministry of Industry and Information Technology of the People’s Republic of China. This Part is under the jurisdiction of National Technical Committee of Auto Standardization (SAC/TC 114). Drafting organizations of this Part. China Automotive Technology & Research Center, Suzhou Tai Site Electronic Technology Co., Ltd., Centre Testing International Group Co., Ltd., China Electronics Standardization Institute, Shenzhen Hsac Electronics Co., Ltd., Shanghai Volkswagen Automobile Co., Ltd., Changchun Automobile Testing Center, Passenger Car Company of Shanghai SAIC Motor Corporation Limited, Shenzhen BYD Automobile Co., Ltd., Huizhou Desay SV Automotive Co., Ltd., Mercedes-Benz (China) Automotive Sales Co., Ltd. Main drafters of this Part. Ding Yifu, Xu Xiuxiang, Sun Chengming, Li Yunhong, Cui Qiang, Wang Xibin, Guan Jun, Lin Yanping, Deng Xianghong, Liu Xin, Ma Fangchi, Zhou Xuguang, You Li, Liu Dan. Road vehicles - Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 5.Stripline1 ScopeThis Part of GB/T 33014 specifies the immunity test for electrical/electronic components to continuous electrical disturbances from narrowband radiated electromagnetic energy - stripline.2 Normative referenceThe following referenced documents are indispensable for the application of this document. For dated references, only the dated edition cited applies. For undated references, the latest edition of the referenced document (including all amendments) applies. GB/T 33014.1 Road vehicles - Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 1.General (GB/T 33014.1-2016, ISO 11452-1.2005, MOD)3 Terms and definitionsFor the purposes of this document, the terms and definitions given in GB/T 33014.1 apply.4 Test conditionsThe useful frequency range of stripline is from 0.01 MHz to 400 MHz. The users shall specify the test severity level or levels over the frequency range. See annex B for suggested severity levels.5 Test apparatus and instrumentationA stripline (see annex A) shall set up a region of uniform electromagnetic fields. The stripline is to expose at least 1 m of the wiring harness under the test region (see Figure 1).6 TestAlternatively, the relation between field strength and net power may be determined by placing a calibrated field probe as close as possible to the centre of the stripline, with respect to the longitudinal and transverse axes under the active conductor.Annex A(informative) Stripline design A 50 Ω stripline construction is shown in Figures A.1 to A.4.Dimension I shall be at least 2 m. The ratio of b to h determines the characteristic impedance. If dimension b is greater than h, the characteristic impedance is calculated as Equation (A.1).Annex B(informative) Function performance status classification (FPSC) Suggested test severity levels and the frequency bands of this Part are given in Table A.1 and Table A.2, respectively. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 33014.5-2016 be delivered?Answer: The full copy PDF of English version of GB/T 33014.5-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 33014.5-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33014.5-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33014.5-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 33014.5-2016?A step-by-step guide to download PDF of GB/T 33014.5-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 33014.5-2016". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
