GB/T 33014.1-2016 PDF EnglishUS$125.00 · In stock · Download in 9 seconds
GB/T 33014.1-2016: Road vehicles -- Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy -- Part 1: General Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 33014.1-2016: Road vehicles -- Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy -- Part 1: General---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33014.1-2016 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.040.10 T 36 Road vehicles - Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 1.General (ISO 11452-1.2005, Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1. General principles and terminology, MOD) Issued on. OCTOBER 13, 2016 Implemented on. NOVEMBER 1, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 6 4 Test conditions... 6 5 Test instrumentation... 10 6 Test procedure... 11 Annex A (normative) Function performance status classification (FPSC)... 15 Annex B (informative) Constant peak test level... 18ForewordGB/T 33014 “Road vehicles - Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy” consists of the following parts. - Part 1.General; - Part 2.Absorber-lined shielded enclosure; - Part 3.Transverse electromagnetic (TEM) cell; - Part 4.Bulk current injection (BCI); - Part 5.Stripeline; - Part 7.Direct radio frequency (RF) power injection; - Part 8.Magnetic field immunity; - Part 9.Portable transmitter simulation; - Part 10.Conduction immunity method for extended audio range; - Part 11.Reverberation chamber. This Part is Part 1 of GB/T33014. This Part is drafted in accordance with the rules given in GB/T 1.1-2009. This Part uses the re-drafting method to modify and adopt ISO 11452-1.2005 “Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1.General principles and terminology” and ISO 11452-1 AMD 1.2008. The technical differences between this Part and ISO 11452-1.2005 are as follows. - PREPARE Clause 1 according to the provisions of GB/T 1.1-2009; - ADD “Normative references” according to the provisions of GB/T1.1-2009, which includes a number of standards used in the text; - Because the original international standard of this series standard has been increased to 11 parts, but the other part cannot be synchronously converted to Part 1 ~ Part 5, so it is hard to describe in Table 1.Thus, in this Part, it deletes Part 7 in Table 1 of the original international standard, and retains only Part 1 ~ Part 5 that are synchronously converted; - The definition of the terms in the original international standard are deleted and the national standard is referenced, to avoid duplication of definitions; - The contents of Clause 3 of the original international standard are included in 4.1, the contents of the original 4.1 are included in 4.2, and Clause 3 and Clause 4 of the original international standard are merged together to maintain structural correspondence with the original international standard; - An amendment of the original international standard is added in 2008, which has made a great adjustment to Annex A “Function performance status classification (FPSC)”; considering that internationally the understanding and requirements of function performance status classification (FPSC) tend to adopt the new version, so in this Part, the Amendment 2008 is applied to Annex A. - Because the principle of function performance status classification (FPSC) is described both in A.1 and A.2 of Annex A of the original international standard (2008 edition), and the content and heading are not fully matched, in this Part, the contents of the upper and lower paragraphs are arranged and the principle of function performance status classification (FPSC) is integrated into A.2, so that the content and heading of the upper and lower paragraphs are fully matched, to facilitate the understanding and use of the standard. The following editorial changes have been made in this Part. - DELETE the foreword, introduction and bibliography of the original international standard. This Part is proposed by Ministry of Industry and Information Technology of the People’s Republic of China. This Part is under the jurisdiction of National Technical Committee of Auto Standardization (SAC/TC 114). Drafting organizations of this Part. China Automotive Technology & Research Center, Suzhou Test Electronic Technology Co., Ltd., Commercial Vehicle Technology Center of Shanghai SAIC Motor Corporation Limited, Passenger Car Company of Shanghai SAIC Motor Corporation Limited, Shanghai Volkswagen Automobile Co., Ltd., China Electronics Standardization Institute, Changchun Automobile Testing Center, Shenzhen Hsac Electronics Co., Ltd., Centre Testing International Group Co., Ltd., Anhui Jianghuai Automobile Group Corp., Ltd., Denso (China) Investment Co., Ltd., Toyota Automotive Technology Center (China) Co., Ltd. Main drafters of this Part. Xu Xiuxiang, Ding Yifu, Sun Chengming, Chen Yanlei, Ma Fangchi, Liu Xinliang, Lin Yanping, Ma Shaoqi, Deng Xianghong, Liu Xin, Zhang Hong, Chang Genglin, Qin Feng, Zang Pengpeng. Road vehicles - Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 1.General1 ScopeThis Part of GB/T 33014 specifies the basic conditions, test instrumentations and test procedures of the immunity test for electrical/electronic components (ESA) to continuous electrical disturbances from narrowband radiated electromagnetic energy. This Part applies to electrical/electronic components for M, N, O, L vehicles (regardless of the vehicle power system, e.g. spark-ignition engine, diesel engine, electric motor).2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the dated edition cited applies. For undated references, the latest edition of the referenced document (including all amendments) applies. GB/T 29259 Road vehicle - Electromagnetic compatibility terminology3 Terms and definitionsFor the purpose of this document, the terms and definitions defined in GB/T 29259 apply.4 Test conditionsA single standard test might not reveal all the information about the DUT. It is thus necessary for users of this series of standards to anticipate the appropriate test conditions, select applicable parts of GB/T 33014 and define function performance indicators of DUT. The characteristics of the DUT determine the type and frequency of modulation to be used.5 Test instrumentationIt shall establish uniform measurement conditions at radio frequencies, which requires specific grounding practices as follows. In the frequency range limited by the bandwidth of both the amplifier and the antenna (transducer) in use, the amplifier harmonic content (up to the fifth harmonic) shall be at least 12 dB lower than the carrier wave (at least 6 dB lower at frequencies above 1 GHz), unless otherwise specified for a particular test method or in the test plan.6 Test procedureThe following methods are used in certain parts of GB/T 33014. The forward power required for the test signal can be derived from the following formula according to the calibrated value.Annex A(normative) Function performance status classification (FPSC) This annex describes the functional performance statue of a device, that is, how a particular device works as expected under the influence of a particular test signal, giving a general definition method for the qualification situation of the vehicle in and after the narrowband radiated electromagnetic disturbance test. The definition method shall be used in conjunction with the relevant part of GB/T 33014. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 33014.1-2016 be delivered?Answer: The full copy PDF of English version of GB/T 33014.1-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 33014.1-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33014.1-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33014.1-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 33014.1-2016?A step-by-step guide to download PDF of GB/T 33014.1-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 33014.1-2016". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
