GB/T 30038-2013 PDF EnglishUS$145.00 · In stock · Download in 9 seconds
GB/T 30038-2013: Road vehicles -- Degrees of electrical equipment protection (IP-Code) Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 30038-2013: Road vehicles -- Degrees of electrical equipment protection (IP-Code)---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT30038-2013GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.040.10 T 36 Road vehicles - Degrees of electrical equipment protection (IP-Code) (ISO 20653.2006, MOD) Issued on. NOVEMBER 27, 2013 Implemented on. JULY 01, 2014 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China; Standardization Administration of the People’s Republic of China. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 5 4 Structure and significance of IP-code... 6 5 Degrees of protection against foreign objects and against access... 8 6 Degrees of protection against water... 10 7 Designation examples... 11 8 Requirements and testing... 12 9 Notes on the assignment of degrees of protection... 24ForewordThis Standard was drafted in accordance with the rules given GB/T 1.1-2009. This Standard uses the redrafting method to modify and use ISO 20653.2006 “Road vehicle - Degree of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access”. Technical differences between this Standard and ISO 20653.2006 and the reasons are as follows. - IEC 60529 (identical to GB 4208), which is referenced in ISO 20653.2006, is deleted in this Standard, because it is not used in the text, but only indicates the source of the definition in the term. - The header of Table 2, Table 3, Table 4 is adjusted; - In 8.4.1 of ISO 20653.2006, Figures 3-7 is the error of the original text, which is modified to Figures 3-6 in this Standard [Translator note. this standard still uses Figures 3-7 in 8.4.1]. - In 9.3 of ISO 20653.2006, Figure 7 is the error of the original text, which is modified to Figure 7 and Figure 8 in this Standard; the three items in the original text and the note of Figure 7 are repeated and not exactly the same, so the three items are deleted in this Standard to facilitate understanding. - In the “9K” column of Table 7 of ISO 20653.2006, Figure 8 is the error of the original text, which is modified to Figure 9 in this Standard [Translator note. this standard still uses Figure 8]. - There are several errors in Table 5 and Table 6 of ISO 20653.2006, which are corrected in this standard basing on the context and the understanding of the standard. - In the “4K” column of Table 7 of ISO 20653.2006, 0.4 mm is the error of the original text, which is modified to 0.8 mm in this Standard [Translator note. this standard still uses 0.4mm], to be consistent with Figure 4. - It does not give a note for “a” in Figure 4 of ISO 20653.2006, so a note “a - maximum 200” is added in this Standard with reference to GB 4208. The editorial modifications are as follows. This Standard is used in conjunction with GB/T 28046 series of standards, so the “electrical equipment” in the original heading and scope is modified to “electrical and electronic equipment”, to correspond to the text. This Standard is proposed by Ministry of Industry and Information Technology of the People's Republic of China. This Standard shall be under the jurisdiction of N National Technical Committee of Auto Standardization (SAC/TC 114). Drafting organizations of this Standard. China Automotive Technology Research Center, Shanghai Institute of Quality Inspection and Technical Research, Shaanxi Heavy Duty Automobile Co., Ltd., Shenzhen Hangsheng Electronics Co., Ltd., Dongfeng Trucks Technology Center, Changsha Automobile Electric Institute, Jinan Power Co., Ltd. of China National Heavy- Duty Truck Group. Main drafters of this Standard. Xu Xiuxiang, Lu Zhaoming, Pan Jingwen, Wang Xibin, He Yujun, Hu Mengjiao, Zhang Lan, Deng Xianghong. Road vehicles - Degrees of electrical equipment protection (IP-Code)1 ScopeThis Standard specifies degrees of protection (IP-Code) provided by enclosures of the electrical equipment of road vehicles, and requirements and tests for each degree of protection.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 2423.37 Environmental testing for electric and electronic products - Part 2.Test methods - Test L. Dust and sand (GB/T 2423.37-2006, IEC 60068-2-68.1994, IDT)3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply. Protection provided by an enclosure against access, foreign objects and water and verified by standardized test methods.4 Structure and significance of IP-codeWhere no characteristic numeral is required, the letter “X” shall be substituted (or “XX”, if none of the two code elements have been indicated). Additional, supplementary letters may be omitted without substitute. The following examples explain the use and arrangements of letters in the IP- Code.5 Degrees of protection against foreign objects and against accessTables 2 and 3 give brief descriptions of the degrees of protection against foreign objects and against access with the relevant requirements.6 Degrees of protection against waterTable 4 gives brief descriptions of the degrees of protection against water with the relevant requirements.7 Designation examplesThe designation IP2X is the degree of protection for the complete enclosure, and IP5KX is the degree of protection for the cover of a part inside the complete enclosure.8 Requirements and testingProbes for determining the degrees of protection against foreign objects and access are shown in Table 5.When carrying out the tests with the ball, it shall avoid the influence of probe handle and guard on the tests.9 Notes on the assignment of degrees of protectionThe decisive criterion of degrees of protection is the type of design of the enclosure and the impact of foreign bodies to be expected during operation of the relevant vehicle at the mounting or attachment position. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 30038-2013 be delivered?Answer: The full copy PDF of English version of GB/T 30038-2013 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 30038-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30038-2013_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 30038-2013 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 30038-2013?A step-by-step guide to download PDF of GB/T 30038-2013_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 30038-2013". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
