GB/T 29479.1-2025 PDF EnglishUS$215.00 · In stock · Download in 9 seconds
GB/T 29479.1-2025: Mobile laboratory - Part 1: General rule Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 29479.1: Historical versions
Similar standardsGB/T 29479.1-2025: Mobile laboratory - Part 1: General rule---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT29479.1-2025GB NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA ICS 03.120.20 CCS A 20 Replacing GB/T 29479-2012 Mobile laboratory - Part 1.General rule Issued on: APRIL 25, 2025 Implemented on: NOVEMBER 1, 2025 Issued by. State Administration for Market Regulation; Standardization Administration of PRC. Table of ContentsForeword... 3 Introduction... 5 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Composition and classification and gradation codes... 7 5 Mobile characteristics and requirements... 7 6 Design requirements... 8 7 Technical requirements... 9 7.1 Overall requirements... 9 7.2 Environmental protection and safety... 9 7.3 Intelligence and networking... 10 8 Manufacturing and acceptance requirements (trial run requirements)... 10 9 Management requirements... 10 Appendix A (Informative) Specific-purpose mobile laboratories and their corresponding implementation standards... 12 References... 13 Mobile laboratory - Part 1.General rule1 ScopeThis document specifies the composition and classification and gradation codes, mobile characteristics and requirements, design requirements, technical requirements, manufacturing and acceptance requirements, and management requirements of mobile laboratories. This document applies to the design, manufacture, acceptance, use and management of mobile laboratories.2 Normative referencesThe provisions of the following documents constitute the essential clauses of this document through normative references in this text. Among them, for referenced documents with dates, only the versions corresponding to the dates are applicable to this document; for referenced documents without dates, the latest versions (including all amendments) are applicable to this document. GB/T 27000 Conformity assessment - Vocabulary and general principles GB 27421 Mobile laboratories - General requirements for biosafety GB/T 29472 Safety management specification for mobile laboratory GB/T 29474 General technical specification for the interior decoration material of mobile laboratory GB/T 29475 Design principles and basic requirements for mobile laboratory GB/T 29476 General technical specification for mobile laboratory instruments and equipment GB/T 29477 General technical specification for mobile laboratory shelter GB/T 29478 Mobile laboratory hazardous waste management specification GB/T 29479.2 Mobile laboratory - Part 2.Competence requirements GB/T 29600 Technical specification of the temperature & humidity control system for the mobile laboratory GB/T 31017 Mobile laboratory - Terminology GB/T 31020 Mobile characteristic of mobile laboratories GB/T 33246 Mobile laboratory - General specification for work table GB/T 33247 Mobile laboratory - Design guideline of water supply and drainage system GB/T 33253 Mobile laboratory - General specification for carriers GB/T 33709 Mobile laboratory - Guidance on dissemination and traceability of the value of equipment GB/T 33710 Mobile laboratory - Method for classification and gradation GB/T 33711 Mobile laboratory - General technical specification for information transmission system GB/T 38080 Technical requirements for safety environment and occupational health in mobile laboratory VIM 3rd Edition International vocabulary of metrology - Basic and general concepts and associated terms3 Terms and definitionsThe terms and definitions defined in GB/T 27000, GB/T 31017 and VIM 3rd Edition apply to this document.4 Composition and classification and gradation codes4.1 The mobile laboratory mainly consists of three functional units. instruments and equipment, laboratory shelter (including supply system) and carrier. NOTE. Generally, instruments and equipment include mobile equipment and facilities for online testing (monitoring). 4.2 The classification and gradation codes for mobile laboratories shall be in accordance with the provisions of GB/T 33710.5 Mobile characteristics and requirements5.1 The mobile characteristics and requirements shall comply with the provisions of GB/T 31020. 5.2 The mobile characteristics of the mobile laboratory shall be identified. The identification of mobile characteristics needs to take into account factors such as the mobile laboratory system design, environmental characteristics and requirements, device/equipment performance, safety assurance, and personnel. 5.3 Control measures shall be taken for identified mobile characteristics, and their effectiveness shall be monitored to ensure that the testing (monitoring), calibration, sampling (sampling, sample-taking), scientific experimental data and results during or after the movement are valid. 5.4 Procedures shall be in place to ensure that mobile laboratories do not pose safety risks due to their mobile characteristics, including personnel safety, equipment and facility safety, and environmental safety. Emergency response capabilities shall be available in the event of a safety incident.6 Design requirements6.1 The overall design shall meet the requirements of GB/T 29475. 6.2 Under the premise of meeting technical indicators, priority shall be given to the use of standard parts and modularization design to improve interchangeability and universality. Modularization design should meet the requirements of GB/T 31018. 6.3 The application of new technologies such as system integration, energy conservation and environmental protection, digitalization, and intelligence should be considered. 6.4 The mobile laboratory structure shall be able to withstand the rated static load, including its service, as well as the rated dynamic load during lifting, long-distance transportation (specified distance), and testing. It shall have high overall strength, high rigidity, and light weight, and be resistant to fatigue, radiation, interference, and vibration. It shall be equipped with an environmental conditioning system as needed, and the work area shall be isolated from the mobile carrier and ancillary equipment. 6.5 Layout design shall fully consider safety passages, ergonomics, specialized scientific experimental functions, operating space, and instrument and equipment layout based on the experimental workflow and operating procedures. It shall also meet the relevant requirements of the laboratory design's application location and special environment, ventilation, environmental protection, ergonomics, and safety of use. Ergonomic design shall comply with the provisions of GB/T 31019.7 Technical requirements7.1 Overall requirements 7.1.1 The mobile laboratory shall be equipped with experimental devices and instruments that meet the needs of specific purposes and requirements for testing (monitoring), calibration, sampling (sampling, sample-taking). The instruments and equipment for mobile laboratories shall comply with the provisions of GB/T 29476. 7.1.2 The mobile laboratory shelter shall meet the following requirements. a) The technical requirements shall comply with the provisions of GB/T 29477; b) The layout is reasonable, with functions such as sample processing, testing, and storage. Each functional area is relatively independent and meets the requirements of testing specifications, method procedures, instrument and equipment usage conditions, or sample handling and preparation; c) Effective isolation measures shall be in place for equipment, facilities and conditions that may affect testing data and results to prevent contamination, interference or other adverse effects on mobile laboratory activities. 7.1.3 The carrier shall comply with the requirements of GB/T 33253. 7.1.4 The operating platform shall comply with the requirements of GB/T 33246. 7.1.5 The water supply and drainage systems should comply with the requirements of GB/T 33247. 7.1.6 The temperature and humidity control system shall comply with the provisions of GB/T 29600. 7.1.7 Interior decoration materials shall comply with the requirements of GB/T 29474. 7.1.8 It is advisable to select standard materials/samples suitable for mobile experiments, and it is advisable to use electronic standard materials/samples. 7.1.9 Specific-purpose mobile laboratories and their corresponding implementation standards are shown in Appendix A. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 29479.1-2025 be delivered?Answer: The full copy PDF of English version of GB/T 29479.1-2025 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 29479.1-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29479.1-2025_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 29479.1-2025 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 29479.1-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 29479.1-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 29479.1-2025?A step-by-step guide to download PDF of GB/T 29479.1-2025_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 29479.1-2025". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
