GB/T 29475-2012 PDF EnglishUS$170.00 · In stock · Download in 9 seconds
GB/T 29475-2012: Design principles and basic requirements for mobile laboratory Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 29475-2012: Design principles and basic requirements for mobile laboratory---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT29475-2012NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 01.110 A 01 Design principles and basic requirements for mobile laboratory Issued on. DECEMBER 31, 2012 Implemented on. JULY 31, 2013 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China. Table of ContentsFOREWORD... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 5 4 Classification of mobile laboratories... 5 5 Design principles... 6 6 Basic design requirements... 6FOREWORDThis Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard shall be under the jurisdiction of National Technical Committee on Mobile Laboratory of Standardization Administration of China (SAC/TC 509). The drafting organizations of this Standard. Centechsv Special Vehicle Co., Ltd., Shenyang Product Quality Supervision and Inspection Institute, Luping Tieling Special Purpose Vehicle Co., Ltd., Hanyang SPV Research Institute. The drafters of this Standard. Duan Liancheng, Wang Guohai, Dong Weimin, Li Mei, Li Nan, Wang Dongyan, Xu Xiangguang, Guo Jiang, Tang Ke, Duan Jihong. Design principles and basic requirements for mobile laboratory1 ScopeThis Standard specifies the design principles and basic requirements for mobile laboratories. This Standard applies to mobile laboratories which are used on land.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB 1495-2002, Limits and measurement methods for noise emitted by accelerating motor vehicles GB 1589-2004, Limits of dimensions, axle load and masses for road vehicles GB 3096-1993, Standard of environmental noise of urban area GB 7258-2012, Safety specifications for power-driven vehicles operating on roads GB 19489-2008, Laboratories - General Requirements for Biosafety GB/T 29473-2012, Classification, code and marking of mobile laboratory GB/T 29477-2012, General technical specification for mobile laboratory shelter GB/T 29478-2012, Mobile laboratory hazardous waste management specification GB/T 29479-2012, General requirements of mobile laboratory QC/T 252, Type test regulations for special automobile QC/T 484, Automobile Paint Coating3 Terms and definitionsTerms and definitions determined by GB/T 29479-2012, GB/T 29473-2012 and the following ones are applicable to this document. For ease of use, some of the terms and definitions in GB/T 29473-2012 are repeated below. 3.1 Self-propelled A self-powered method that relies on its own operating mechanism to move. [GB/T 29473-2012, definition 3.1] 3.2 Trailer The method of non-powered system with walking mechanism to rely on other power traction to move. [GB/T 29473-2012, definition 3.2]4 Classification of mobile laboratories4.1 By movement, divided into. 4.2 By discipline, divided into.5 Design principles5.1 Safety When designing the mobile laboratory, the unsafe factors in the process of use, movement and storage shall be fully identified and effectively controlled. 5.2 Environmental protection When designing the mobile laboratory, the environmental protection requirements in the process of production and use shall be fully considered. 5.4 Maintainability The design scheme of the mobile laboratory and the parts, assemblies and equipment of the mobile laboratory shall be maintainable, and the wearing parts shall be easy to maintain and replace. 5.5 Modularity Modular design shall be adopted in the mobile laboratory, to maximize laboratory functions, minimize space and minimize production costs.6 Basic design requirements6.1 Environmental adaptability 6.1.1 Fully identify the climatic environmental conditions (such as temperature, humidity, air pressure, wind speed) in the area where the mobile laboratory is used, so as to ensure the normal operation of the mobile laboratory. 6.2 Mobile compliance 6.2.1 The self-propelled mobile laboratory shall meet the requirements of relevant standards such as GB 7258-2012 and GB 1589-2004. 6.2.4 The carrier of the mobile laboratory shall be complete vehicle, class-2 chassis, semi-trailer and trailer which are listed in the National Automobile Product Bulletin. 6.3 Laboratory shelter 6.3.1 The design of the laboratory shelter shall conform to ergonomics. 6.3.2 The floor and side walls of the laboratory shelter shall be provided with pretreatment measures for the installation of instruments and facilities. 6.3.6 The tightness of the laboratory shelter shall meet the requirements of 5.5 in GB/T 29477-2012. 6.3.7 The carrying capacity of the laboratory shelter shall meet the requirements of 5.7.5, 5.7.6 and 5.7.7 in GB/T 29477-2012. 6.3.8 The laboratory shelter shall be installed with a door lock as required, which shall be easy to open quickly inside. 6.3.9 The laboratory shelter shall be provided with escape facilities. 6.3.10 The laboratory shelter can be designed with positive and negative pressure cabins according to the requirements of use. 6.3.15 The facilities in the laboratory shelter, and the on and off of doors and drawers of the laboratory cabinet shall have a locking function. 6.4 Facilities 6.4.1 The mobile laboratory shall use vehicle-mounted laboratory apparatus which shall be installed and fixed reliably, and shall be provided with a shock absorption device of corresponding level if necessary. 6.4.2 When necessary, the laboratory apparatus and equipment shall be selected to have the characteristics of electromagnetic compatibility. 6.5 Power supply system 6.6 Water supply and drainage system 6.6.1 The mobile laboratory in need shall be equipped with a water supply and drainage system. 6.6.2 The water supply source shall not be polluted. If the water sources of experimental water and public water are different, they shall be indicated separately. 6.6.3 The water supply shall be able to meet the supply of the laboratory for not less than 4 hours of normal work. 6.6.4 The drainage system shall be equipped with sewage collection and discharge devices. 6.7 Air conditioning, cleaning and ventilation systems 6.7.1 For the mobile laboratory in need, install a temperature and humidity conditioning system to make the environment in the laboratory meet the requirements for the use of laboratory apparatus and equipment. 6.7.2 The mobile laboratory shall be equipped with ventilation devices such as detoxification cabinets, universal exhaust hoods, and fans as required. 6.7.3 The mobile laboratory shall be equipped with primary, middle and high efficiency filters as required. 6.8 Air supply system The mobile laboratory shall be equipped with an air supply system as required, and the system shall ensure airtightness, high cleanliness, durability, safety and reliability. It shall meet the requirements of continuous use of various gases by laboratory apparatus and full adjustment of overall or partial gas pressure and flow. 6.9 Environmental protection 6.10 Intelligence 6.10.1 The mobile laboratory should be equipped with comprehensive intelligent systems such as laboratory shelter automatic control system, laboratory information management system, office automation system, safety early warning system, and automatic fire alarm system as required. 6.10.2 The laboratory shelter automatic control system shall conduct centralized control of ventilation, experimental gas, water supply and drainage, temperature and humidity. 6.10.3 The laboratory information management system shall be equipped with necessary remote communication facilities or reserved interfaces. 6.11 Safety protection 6.12 Reliability 6.12.1 The road movement (driving) reliability test scheme of the complete set of equipment in the mobile laboratory shall meet the requirements of QC/T 252. 6.12.2 Working under the specified conditions of use, the average fault mileage of the complete set of equipment in the mobile laboratory is not less than 3 000 km. 6.12.3 After passing the specified reliability driving test, all laboratory apparatus and equipment in the mobile laboratory shall be able to be used normally; no faults affecting the mobile function and experimental function shall occur. 6.13 Marking The mobile laboratory shall be equipped with nameplates and warning signs that meet the requirements of GB/T 29473-2012, including laboratory functions, area management, guidelines, dangerous goods protection, warnings, prohibition prompts, instructions, etc. The power supply lines shall be clearly marked and distinguished. 6.14 Technical documents The mobile laboratory shall have complete and traceable technical documents. The mobile laboratory shall be provided with the following technical documents. product certificate, instruction manual, tools and accessories list and other safeguard documents. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 29475-2012 be delivered?Answer: The full copy PDF of English version of GB/T 29475-2012 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 29475-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29475-2012_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 29475-2012 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 29475-2012?A step-by-step guide to download PDF of GB/T 29475-2012_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 29475-2012". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
